⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 vcpu.h

📁 xen 3.2.2 源码
💻 H
字号:
/****************************************************************************** * vcpu.h *  * VCPU initialisation, query, and hotplug. *  * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to * deal in the Software without restriction, including without limitation the * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Copyright (c) 2005, Keir Fraser <keir@xensource.com> */#ifndef __XEN_PUBLIC_VCPU_H__#define __XEN_PUBLIC_VCPU_H__/* * Prototype for this hypercall is: *  int vcpu_op(int cmd, int vcpuid, void *extra_args) * @cmd        == VCPUOP_??? (VCPU operation). * @vcpuid     == VCPU to operate on. * @extra_args == Operation-specific extra arguments (NULL if none). *//* * Initialise a VCPU. Each VCPU can be initialised only once. A  * newly-initialised VCPU will not run until it is brought up by VCPUOP_up. *  * @extra_arg == pointer to vcpu_guest_context structure containing initial *               state for the VCPU. */#define VCPUOP_initialise            0/* * Bring up a VCPU. This makes the VCPU runnable. This operation will fail * if the VCPU has not been initialised (VCPUOP_initialise). */#define VCPUOP_up                    1/* * Bring down a VCPU (i.e., make it non-runnable). * There are a few caveats that callers should observe: *  1. This operation may return, and VCPU_is_up may return false, before the *     VCPU stops running (i.e., the command is asynchronous). It is a good *     idea to ensure that the VCPU has entered a non-critical loop before *     bringing it down. Alternatively, this operation is guaranteed *     synchronous if invoked by the VCPU itself. *  2. After a VCPU is initialised, there is currently no way to drop all its *     references to domain memory. Even a VCPU that is down still holds *     memory references via its pagetable base pointer and GDT. It is good *     practise to move a VCPU onto an 'idle' or default page table, LDT and *     GDT before bringing it down. */#define VCPUOP_down                  2/* Returns 1 if the given VCPU is up. */#define VCPUOP_is_up                 3/* * Return information about the state and running time of a VCPU. * @extra_arg == pointer to vcpu_runstate_info structure. */#define VCPUOP_get_runstate_info     4struct vcpu_runstate_info {    /* VCPU's current state (RUNSTATE_*). */    int      state;    /* When was current state entered (system time, ns)? */    uint64_t state_entry_time;    /*     * Time spent in each RUNSTATE_* (ns). The sum of these times is     * guaranteed not to drift from system time.     */    uint64_t time[4];};typedef struct vcpu_runstate_info vcpu_runstate_info_t;DEFINE_XEN_GUEST_HANDLE(vcpu_runstate_info_t);/* VCPU is currently running on a physical CPU. */#define RUNSTATE_running  0/* VCPU is runnable, but not currently scheduled on any physical CPU. */#define RUNSTATE_runnable 1/* VCPU is blocked (a.k.a. idle). It is therefore not runnable. */#define RUNSTATE_blocked  2/* * VCPU is not runnable, but it is not blocked. * This is a 'catch all' state for things like hotplug and pauses by the * system administrator (or for critical sections in the hypervisor). * RUNSTATE_blocked dominates this state (it is the preferred state). */#define RUNSTATE_offline  3/* * Register a shared memory area from which the guest may obtain its own * runstate information without needing to execute a hypercall. * Notes: *  1. The registered address may be virtual or physical or guest handle, *     depending on the platform. Virtual address or guest handle should be *     registered on x86 systems. *  2. Only one shared area may be registered per VCPU. The shared area is *     updated by the hypervisor each time the VCPU is scheduled. Thus *     runstate.state will always be RUNSTATE_running and *     runstate.state_entry_time will indicate the system time at which the *     VCPU was last scheduled to run. * @extra_arg == pointer to vcpu_register_runstate_memory_area structure. */#define VCPUOP_register_runstate_memory_area 5struct vcpu_register_runstate_memory_area {    union {        XEN_GUEST_HANDLE(vcpu_runstate_info_t) h;        struct vcpu_runstate_info *v;        uint64_t p;    } addr;};typedef struct vcpu_register_runstate_memory_area vcpu_register_runstate_memory_area_t;DEFINE_XEN_GUEST_HANDLE(vcpu_register_runstate_memory_area_t);/* * Set or stop a VCPU's periodic timer. Every VCPU has one periodic timer * which can be set via these commands. Periods smaller than one millisecond * may not be supported. */#define VCPUOP_set_periodic_timer    6 /* arg == vcpu_set_periodic_timer_t */#define VCPUOP_stop_periodic_timer   7 /* arg == NULL */struct vcpu_set_periodic_timer {    uint64_t period_ns;};typedef struct vcpu_set_periodic_timer vcpu_set_periodic_timer_t;DEFINE_XEN_GUEST_HANDLE(vcpu_set_periodic_timer_t);/* * Set or stop a VCPU's single-shot timer. Every VCPU has one single-shot * timer which can be set via these commands. */#define VCPUOP_set_singleshot_timer  8 /* arg == vcpu_set_singleshot_timer_t */#define VCPUOP_stop_singleshot_timer 9 /* arg == NULL */struct vcpu_set_singleshot_timer {    uint64_t timeout_abs_ns;   /* Absolute system time value in nanoseconds. */    uint32_t flags;            /* VCPU_SSHOTTMR_??? */};typedef struct vcpu_set_singleshot_timer vcpu_set_singleshot_timer_t;DEFINE_XEN_GUEST_HANDLE(vcpu_set_singleshot_timer_t);/* Flags to VCPUOP_set_singleshot_timer. */ /* Require the timeout to be in the future (return -ETIME if it's passed). */#define _VCPU_SSHOTTMR_future (0)#define VCPU_SSHOTTMR_future  (1U << _VCPU_SSHOTTMR_future)/*  * Register a memory location in the guest address space for the * vcpu_info structure.  This allows the guest to place the vcpu_info * structure in a convenient place, such as in a per-cpu data area. * The pointer need not be page aligned, but the structure must not * cross a page boundary. * * This may be called only once per vcpu. */#define VCPUOP_register_vcpu_info   10  /* arg == vcpu_register_vcpu_info_t */struct vcpu_register_vcpu_info {    uint64_t mfn;    /* mfn of page to place vcpu_info */    uint32_t offset; /* offset within page */    uint32_t rsvd;   /* unused */};typedef struct vcpu_register_vcpu_info vcpu_register_vcpu_info_t;DEFINE_XEN_GUEST_HANDLE(vcpu_register_vcpu_info_t);/* Send an NMI to the specified VCPU. @extra_arg == NULL. */#define VCPUOP_send_nmi             11/*  * Get the physical ID information for a pinned vcpu's underlying physical * processor.  The physical ID informmation is architecture-specific. * On x86: id[31:0]=apic_id, id[63:32]=acpi_id, and all values 0xff and *         greater are reserved. * This command returns -EINVAL if it is not a valid operation for this VCPU. */#define VCPUOP_get_physid           12 /* arg == vcpu_get_physid_t */struct vcpu_get_physid {    uint64_t phys_id;};typedef struct vcpu_get_physid vcpu_get_physid_t;DEFINE_XEN_GUEST_HANDLE(vcpu_get_physid_t);#define xen_vcpu_physid_to_x86_apicid(physid) \    ((((uint32_t)(physid)) >= 0xff) ? 0xff : ((uint8_t)(physid)))#define xen_vcpu_physid_to_x86_acpiid(physid) \    ((((uint32_t)((physid)>>32)) >= 0xff) ? 0xff : ((uint8_t)((physid)>>32)))#endif /* __XEN_PUBLIC_VCPU_H__ *//* * Local variables: * mode: C * c-set-style: "BSD" * c-basic-offset: 4 * tab-width: 4 * indent-tabs-mode: nil * End: */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -