📄 actbl.h
字号:
/****************************************************************************** * * Name: actbl.h - Table data structures defined in ACPI specification * *****************************************************************************//* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */#ifndef __ACTBL_H__#define __ACTBL_H__/* * Values for description table header signatures */#define RSDP_NAME "RSDP"#define RSDP_SIG "RSD PTR " /* RSDT Pointer signature */#define APIC_SIG "APIC" /* Multiple APIC Description Table */#define DSDT_SIG "DSDT" /* Differentiated System Description Table */#define FADT_SIG "FACP" /* Fixed ACPI Description Table */#define FACS_SIG "FACS" /* Firmware ACPI Control Structure */#define PSDT_SIG "PSDT" /* Persistent System Description Table */#define RSDT_SIG "RSDT" /* Root System Description Table */#define XSDT_SIG "XSDT" /* Extended System Description Table */#define SSDT_SIG "SSDT" /* Secondary System Description Table */#define SBST_SIG "SBST" /* Smart Battery Specification Table */#define SPIC_SIG "SPIC" /* IOSAPIC table */#define BOOT_SIG "BOOT" /* Boot table */#define GL_OWNED 0x02 /* Ownership of global lock is bit 1 *//* * Common table types. The base code can remain * constant if the underlying tables are changed */#define RSDT_DESCRIPTOR struct rsdt_descriptor_rev2#define XSDT_DESCRIPTOR struct xsdt_descriptor_rev2#define FACS_DESCRIPTOR struct facs_descriptor_rev2#define FADT_DESCRIPTOR struct fadt_descriptor_rev2#pragma pack(1)/* * ACPI Version-independent tables * * NOTE: The tables that are specific to ACPI versions (1.0, 2.0, etc.) * are in separate files. */struct rsdp_descriptor /* Root System Descriptor Pointer */{ char signature [8]; /* ACPI signature, contains "RSD PTR " */ u8 checksum; /* To make sum of struct == 0 */ char oem_id [6]; /* OEM identification */ u8 revision; /* Must be 0 for 1.0, 2 for 2.0 */ u32 rsdt_physical_address; /* 32-bit physical address of RSDT */ u32 length; /* XSDT Length in bytes including hdr */ u64 xsdt_physical_address; /* 64-bit physical address of XSDT */ u8 extended_checksum; /* Checksum of entire table */ char reserved [3]; /* Reserved field must be 0 */};struct acpi_common_facs /* Common FACS for internal use */{ u32 *global_lock; u64 *firmware_waking_vector; u8 vector_width;};#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \ char signature [4]; /* ACPI signature (4 ASCII characters) */\ u32 length; /* Length of table, in bytes, including header */\ u8 revision; /* ACPI Specification minor version # */\ u8 checksum; /* To make sum of entire table == 0 */\ char oem_id [6]; /* OEM identification */\ char oem_table_id [8]; /* OEM table identification */\ u32 oem_revision; /* OEM revision number */\ char asl_compiler_id [4]; /* ASL compiler vendor ID */\ u32 asl_compiler_revision; /* ASL compiler revision number */struct acpi_table_header /* ACPI common table header */{ ACPI_TABLE_HEADER_DEF};/* * MADT values and structures *//* Values for MADT PCATCompat */#define DUAL_PIC 0#define MULTIPLE_APIC 1/* Master MADT */struct multiple_apic_table{ ACPI_TABLE_HEADER_DEF /* ACPI common table header */ u32 local_apic_address; /* Physical address of local APIC */ u32 PCATcompat : 1; /* A one indicates system also has dual 8259s */ u32 reserved1 : 31;};/* Values for Type in APIC_HEADER_DEF */#define APIC_PROCESSOR 0#define APIC_IO 1#define APIC_XRUPT_OVERRIDE 2#define APIC_NMI 3#define APIC_LOCAL_NMI 4#define APIC_ADDRESS_OVERRIDE 5#define APIC_IO_SAPIC 6#define APIC_LOCAL_SAPIC 7#define APIC_XRUPT_SOURCE 8#define APIC_RESERVED 9 /* 9 and greater are reserved *//* * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE) */#define APIC_HEADER_DEF /* Common APIC sub-structure header */\ u8 type; \ u8 length;struct apic_header{ APIC_HEADER_DEF};/* Values for MPS INTI flags */#define POLARITY_CONFORMS 0#define POLARITY_ACTIVE_HIGH 1#define POLARITY_RESERVED 2#define POLARITY_ACTIVE_LOW 3#define TRIGGER_CONFORMS 0#define TRIGGER_EDGE 1#define TRIGGER_RESERVED 2#define TRIGGER_LEVEL 3/* Common flag definitions */#define MPS_INTI_FLAGS \ u16 polarity : 2; /* Polarity of APIC I/O input signals */\ u16 trigger_mode : 2; /* Trigger mode of APIC input signals */\ u16 reserved1 : 12; /* Reserved, must be zero */#define LOCAL_APIC_FLAGS \ u32 processor_enabled: 1; /* Processor is usable if set */\ u32 reserved2 : 31; /* Reserved, must be zero *//* Sub-structures for MADT */struct madt_processor_apic{ APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */ u8 local_apic_id; /* Processor's local APIC id */ LOCAL_APIC_FLAGS};struct madt_io_apic{ APIC_HEADER_DEF u8 io_apic_id; /* I/O APIC ID */ u8 reserved; /* Reserved - must be zero */ u32 address; /* APIC physical address */ u32 interrupt; /* Global system interrupt where INTI * lines start */};struct madt_interrupt_override{ APIC_HEADER_DEF u8 bus; /* 0 - ISA */ u8 source; /* Interrupt source (IRQ) */ u32 interrupt; /* Global system interrupt */ MPS_INTI_FLAGS};struct madt_nmi_source{ APIC_HEADER_DEF MPS_INTI_FLAGS u32 interrupt; /* Global system interrupt */};struct madt_local_apic_nmi{ APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */ MPS_INTI_FLAGS u8 lint; /* LINTn to which NMI is connected */};struct madt_address_override{ APIC_HEADER_DEF u16 reserved; /* Reserved - must be zero */ u64 address; /* APIC physical address */};struct madt_io_sapic{ APIC_HEADER_DEF u8 io_sapic_id; /* I/O SAPIC ID */ u8 reserved; /* Reserved - must be zero */ u32 interrupt_base; /* Glocal interrupt for SAPIC start */ u64 address; /* SAPIC physical address */};struct madt_local_sapic{ APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */ u8 local_sapic_id; /* SAPIC ID */ u8 local_sapic_eid; /* SAPIC EID */ u8 reserved [3]; /* Reserved - must be zero */ LOCAL_APIC_FLAGS};struct madt_interrupt_source{ APIC_HEADER_DEF MPS_INTI_FLAGS u8 interrupt_type; /* 1=PMI, 2=INIT, 3=corrected */ u8 processor_id; /* Processor ID */ u8 processor_eid; /* Processor EID */ u8 io_sapic_vector; /* Vector value for PMI interrupts */ u32 interrupt; /* Global system interrupt */ u32 reserved; /* Reserved - must be zero */};/* * Smart Battery */struct smart_battery_table{ ACPI_TABLE_HEADER_DEF u32 warning_level; u32 low_level; u32 critical_level;};#pragma pack()/* * ACPI Table information. We save the table address, length, * and type of memory allocation (mapped or allocated) for each * table for 1) when we exit, and 2) if a new table is installed */#define ACPI_MEM_NOT_ALLOCATED 0#define ACPI_MEM_ALLOCATED 1#define ACPI_MEM_MAPPED 2/* Definitions for the Flags bitfield member of struct acpi_table_support */#define ACPI_TABLE_SINGLE 0x00#define ACPI_TABLE_MULTIPLE 0x01#define ACPI_TABLE_EXECUTABLE 0x02#define ACPI_TABLE_ROOT 0x00#define ACPI_TABLE_PRIMARY 0x10#define ACPI_TABLE_SECONDARY 0x20#define ACPI_TABLE_ALL 0x30#define ACPI_TABLE_TYPE_MASK 0x30/* Data about each known table type */struct acpi_table_support{ char *name; char *signature; void **global_ptr; u8 sig_length; u8 flags;};/* * Get the ACPI version-specific tables */#include "actbl1.h" /* Acpi 1.0 table definitions */#include "actbl2.h" /* Acpi 2.0 table definitions */extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1, * needed for certain workarounds */#pragma pack(1)/* * High performance timer */struct hpet_table{ ACPI_TABLE_HEADER_DEF u32 hardware_id; struct acpi_generic_address base_address; u8 hpet_number; u16 clock_tick; u8 attributes;};#pragma pack()#endif /* __ACTBL_H__ */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -