⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pc.c

📁 xen 3.2.2 源码
💻 C
📖 第 1 页 / 共 2 页
字号:
/* * QEMU PC System Emulator *  * Copyright (c) 2003-2004 Fabrice Bellard *  * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */#include "vl.h"/* output Bochs bios info messages *///#define DEBUG_BIOS#define BIOS_FILENAME "bios.bin"#define VGABIOS_FILENAME "vgabios.bin"#define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"#define LINUX_BOOT_FILENAME "linux_boot.bin"#define KERNEL_LOAD_ADDR     0x00100000#define INITRD_LOAD_ADDR     0x00600000#define KERNEL_PARAMS_ADDR   0x00090000#define KERNEL_CMDLINE_ADDR  0x00099000static fdctrl_t *floppy_controller;static RTCState *rtc_state;#ifndef CONFIG_DMstatic PITState *pit;#endif /* !CONFIG_DM */#ifndef CONFIG_DMstatic IOAPICState *ioapic;#endif /* !CONFIG_DM */static PCIDevice *i440fx_state;static void ioport80_write(void *opaque, uint32_t addr, uint32_t data){}/* MSDOS compatibility mode FPU exception support *//* XXX: add IGNNE support */void cpu_set_ferr(CPUX86State *s){    pic_set_irq(13, 1);}static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data){    pic_set_irq(13, 0);}/* TSC handling */uint64_t cpu_get_tsc(CPUX86State *env){    /* Note: when using kqemu, it is more logical to return the host TSC       because kqemu does not trap the RDTSC instruction for       performance reasons */#if USE_KQEMU    if (env->kqemu_enabled) {        return cpu_get_real_ticks();    } else #endif    {        return cpu_get_ticks();    }}#ifndef CONFIG_DM/* SMM support */void cpu_smm_update(CPUState *env){    if (i440fx_state && env == first_cpu)        i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);}/* IRQ handling */int cpu_get_pic_interrupt(CPUState *env){    int intno;    intno = apic_get_interrupt(env);    if (intno >= 0) {        /* set irq request if a PIC irq is still pending */        /* XXX: improve that */        pic_update_irq(isa_pic);         return intno;    }    /* read the irq from the PIC */    intno = pic_read_irq(isa_pic);    return intno;}#endif /* CONFIG_DM */static void pic_irq_request(void *opaque, int level){    CPUState *env = opaque;    if (level)        cpu_interrupt(env, CPU_INTERRUPT_HARD);    else        cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);}/* PC cmos mappings */#define REG_EQUIPMENT_BYTE          0x14static int cmos_get_fd_drive_type(int fd0){    int val;    switch (fd0) {    case 0:        /* 1.44 Mb 3"5 drive */        val = 4;        break;    case 1:        /* 2.88 Mb 3"5 drive */        val = 5;        break;    case 2:        /* 1.2 Mb 5"5 drive */        val = 2;        break;    default:        val = 0;        break;    }    return val;}static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd) {    RTCState *s = rtc_state;    int cylinders, heads, sectors;    bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);    rtc_set_memory(s, type_ofs, 47);    rtc_set_memory(s, info_ofs, cylinders);    rtc_set_memory(s, info_ofs + 1, cylinders >> 8);    rtc_set_memory(s, info_ofs + 2, heads);    rtc_set_memory(s, info_ofs + 3, 0xff);    rtc_set_memory(s, info_ofs + 4, 0xff);    rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));    rtc_set_memory(s, info_ofs + 6, cylinders);    rtc_set_memory(s, info_ofs + 7, cylinders >> 8);    rtc_set_memory(s, info_ofs + 8, sectors);}static int get_bios_disk(char *boot_device, int index) {    if (index < strlen(boot_device)) {        switch (boot_device[index]) {        case 'a':            return 0x01;            /* floppy */        case 'c':            return 0x02;            /* hard drive */        case 'd':            return 0x03;            /* cdrom */        case 'n':            return 0x04;            /* network */        }    }    return 0x00;                /* no device */}/* hd_table must contain 4 block drivers */static void cmos_init(uint64_t ram_size, char *boot_device, BlockDriverState **hd_table){    RTCState *s = rtc_state;    int val;    int fd0, fd1, nb;    int i;    /* various important CMOS locations needed by PC/Bochs bios */    /* memory size */    val = 640; /* base memory in K */    rtc_set_memory(s, 0x15, val);    rtc_set_memory(s, 0x16, val >> 8);    val = (ram_size / 1024) - 1024;    if (val > 65535)        val = 65535;    rtc_set_memory(s, 0x17, val);    rtc_set_memory(s, 0x18, val >> 8);    rtc_set_memory(s, 0x30, val);    rtc_set_memory(s, 0x31, val >> 8);    if (ram_size > (16 * 1024 * 1024))        val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);    else        val = 0;    if (val > 65535)        val = 65535;    rtc_set_memory(s, 0x34, val);    rtc_set_memory(s, 0x35, val >> 8);        if (boot_device == NULL) {        /* default to hd, then cd, then floppy. */        boot_device = "cda";    }    rtc_set_memory(s, 0x3d, get_bios_disk(boot_device, 0) |                   (get_bios_disk(boot_device, 1) << 4));    rtc_set_memory(s, 0x38, (get_bios_disk(boot_device, 2) << 4) |                   (!fd_bootchk ? 0x01 : 0x00));    /* floppy type */    fd0 = fdctrl_get_drive_type(floppy_controller, 0);    fd1 = fdctrl_get_drive_type(floppy_controller, 1);    val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);    rtc_set_memory(s, 0x10, val);        val = 0;    nb = 0;    if (fd0 < 3)        nb++;    if (fd1 < 3)        nb++;    switch (nb) {    case 0:        break;    case 1:        val |= 0x01; /* 1 drive, ready for boot */        break;    case 2:        val |= 0x41; /* 2 drives, ready for boot */        break;    }    val |= 0x02; /* FPU is there */    val |= 0x04; /* PS/2 mouse installed */    rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);    /* hard drives */    rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));    if (hd_table[0])        cmos_init_hd(0x19, 0x1b, hd_table[0]);    if (hd_table[1])         cmos_init_hd(0x1a, 0x24, hd_table[1]);    val = 0;    for (i = 0; i < 4; i++) {        if (hd_table[i]) {            int cylinders, heads, sectors, translation;            /* NOTE: bdrv_get_geometry_hint() returns the physical                geometry.  It is always such that: 1 <= sects <= 63, 1                <= heads <= 16, 1 <= cylinders <= 16383. The BIOS                geometry can be different if a translation is done. */            translation = bdrv_get_translation_hint(hd_table[i]);            if (translation == BIOS_ATA_TRANSLATION_AUTO) {                bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);                if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {                    /* No translation. */                    translation = 0;                } else {                    /* LBA translation. */                    translation = 1;                }            } else {                translation--;            }            val |= translation << (i * 2);        }    }    rtc_set_memory(s, 0x39, val);}void ioport_set_a20(int enable){    /* XXX: send to all CPUs ? */    cpu_x86_set_a20(first_cpu, enable);}int ioport_get_a20(void){    return ((first_cpu->a20_mask >> 20) & 1);}static void ioport92_write(void *opaque, uint32_t addr, uint32_t val){    ioport_set_a20((val >> 1) & 1);    /* XXX: bit 0 is fast reset */}static uint32_t ioport92_read(void *opaque, uint32_t addr){    return ioport_get_a20() << 1;}/***********************************************************//* Bochs BIOS debug ports */void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val){    static const char shutdown_str[8] = "Shutdown";    static int shutdown_index = 0;        switch(addr) {        /* Bochs BIOS messages */    case 0x400:    case 0x401:        fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);        exit(1);    case 0x402:    case 0x403:#ifdef DEBUG_BIOS        fprintf(stderr, "%c", val);#endif        break;    case 0x8900:        /* same as Bochs power off */        if (val == shutdown_str[shutdown_index]) {            shutdown_index++;            if (shutdown_index == 8) {                shutdown_index = 0;                qemu_system_shutdown_request();            }        } else {            shutdown_index = 0;        }        break;        /* LGPL'ed VGA BIOS messages */    case 0x501:    case 0x502:        fprintf(stderr, "VGA BIOS panic, line %d\n", val);        exit(1);    case 0x500:    case 0x503:#ifdef DEBUG_BIOS        fprintf(stderr, "%c", val);#endif        break;    }}void bochs_bios_init(void){    register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);    register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);    register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);    register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);    register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);    register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);    register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);    register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);    register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);}int load_kernel(const char *filename, uint8_t *addr,                 uint8_t *real_addr){    int fd, size;    int setup_sects;    fd = open(filename, O_RDONLY | O_BINARY);    if (fd < 0)        return -1;    /* load 16 bit code */    if (read(fd, real_addr, 512) != 512)        goto fail;    setup_sects = real_addr[0x1F1];    if (!setup_sects)        setup_sects = 4;    if (read(fd, real_addr + 512, setup_sects * 512) !=         setup_sects * 512)        goto fail;        /* load 32 bit code */    size = read(fd, addr, 16 * 1024 * 1024);    if (size < 0)        goto fail;    close(fd);    return size; fail:    close(fd);    return -1;}static void main_cpu_reset(void *opaque){    CPUState *env = opaque;    cpu_reset(env);}static const int ide_iobase[2] = { 0x1f0, 0x170 };static const int ide_iobase2[2] = { 0x3f6, 0x376 };static const int ide_irq[2] = { 14, 15 };#define NE2000_NB_MAX 6static int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };#ifdef HAS_AUDIOstatic void audio_init (PCIBus *pci_bus){    struct soundhw *c;    int audio_enabled = 0;    for (c = soundhw; !audio_enabled && c->name; ++c) {        audio_enabled = c->enabled;    }

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -