hsmc.hec

这是用Labwindows开发的一个RF test程序。 用于日本机种的组装后ANT 测试。

/****************************************************************************
* File name :   hsmc.hec
* Project :     Smart Card for SySol ME
* Module :      HSMC
* Date :        04/06/2003  
* Version :     1.0
*---------------------------------------------------------------------------*
* Description :
* -------------
* Header file for declaration of constants provided to external modules
*----------------------------------------------------------------------------*
*                                    EVOLUTION
*----------------------------------------------------------------------------*
* Date          | Author                | Description
*----------------------------------------------------------------------------*
* 04/06/2003    | M. SONDERMANN         | Creation
*****************************************************************************/

#if !defined HSMC_HEC
#define HSMC_HEC

/****************************************************************************/

#if defined (PROCESS_SIM)
#undef PROCESS_SIM
#endif

#define PROCESS_SIM	PROCESS_HSMC

/********************** Messages ********************************************/

enum
{
        TDA_INIT = 0,
        TDA_CARD_PRESENCE_ACTIVE,
        TDA_CARD_PRESENCE_PASSIVE,
        TDA_RESET_CARD,
        TDA_DISCONNECT_CARD,
        TDA_REQ_DATA_FROM_CARD,
        TDA_SEND_DATA_TO_CARD,
        TDA_ANSWER_FROM_CARD,
        TDA_ERROR,
        TDA_SET_CARD_CLOCK,
/**** This part is only here for compatibility with SIM ****/
	MOBI_SIM_CARD_UNPLUG,
        MOBI_SIM_CARD_PLUG,
/**** End of this part *************************************/
        TDA_SET_CARD_SLEEP_MODE,
        TDA_SET_CARD_POWER_DOWN
};

#define FF_TDA_INIT_REQ        			MC_PCC_FUNCTION_TYPE (TDA_INIT,PCC_T_REQ)
#define FF_TDA_CARD_PRESENCE_ACTIVE_IND 	MC_PCC_FUNCTION_TYPE (TDA_CARD_PRESENCE_ACTIVE,PCC_T_IND)
#define FF_TDA_CARD_PRESENCE_PASSIVE_IND        MC_PCC_FUNCTION_TYPE (TDA_CARD_PRESENCE_PASSIVE,PCC_T_IND)

#define FF_TDA_RESET_CARD_REQ       		MC_PCC_FUNCTION_TYPE (TDA_RESET_CARD,PCC_T_REQ)
#define FF_TDA_RESET_CARD_CNF       		MC_PCC_FUNCTION_TYPE (TDA_RESET_CARD,PCC_T_CNF)

#define FF_TDA_DISCONNECT_CARD_REQ    		MC_PCC_FUNCTION_TYPE (TDA_DISCONNECT_CARD,PCC_T_REQ)
#define FF_TDA_DISCONNECT_CARD_CNF    		MC_PCC_FUNCTION_TYPE (TDA_DISCONNECT_CARD,PCC_T_CNF)

#define FF_TDA_REQ_DATA_FROM_CARD_REQ      	MC_PCC_FUNCTION_TYPE (TDA_REQ_DATA_FROM_CARD,PCC_T_REQ)
#define FF_TDA_SEND_DATA_TO_CARD_REQ      	MC_PCC_FUNCTION_TYPE (TDA_SEND_DATA_TO_CARD,PCC_T_REQ)
#define FF_TDA_ANSWER_FROM_CARD_CNF      	MC_PCC_FUNCTION_TYPE (TDA_ANSWER_FROM_CARD,PCC_T_CNF)

#define FF_TDA_ERROR_IND      			MC_PCC_FUNCTION_TYPE (TDA_ERROR,PCC_T_IND)

#define FF_TDA_SET_CARD_CLOCK_REQ      		MC_PCC_FUNCTION_TYPE (TDA_SET_CARD_CLOCK,PCC_T_REQ)
#define FF_TDA_SET_CARD_CLOCK_CNF      		MC_PCC_FUNCTION_TYPE (TDA_SET_CARD_CLOCK,PCC_T_CNF)

#define FF_TDA_SET_CARD_SLEEP_MODE_REQ      	MC_PCC_FUNCTION_TYPE (TDA_SET_CARD_SLEEP_MODE,PCC_T_REQ)
#define FF_TDA_SET_CARD_SLEEP_MODE_CNF      	MC_PCC_FUNCTION_TYPE (TDA_SET_CARD_SLEEP_MODE,PCC_T_CNF)

/**** This part is only here for compatibility with SIM ****/
#define FF_MOBI_SIM_CARD_UNPLUG_IND      	MC_PCC_FUNCTION_TYPE (MOBI_SIM_CARD_UNPLUG,PCC_T_IND)
#define FF_MOBI_SIM_CARD_PLUG_IND      		MC_PCC_FUNCTION_TYPE (MOBI_SIM_CARD_PLUG,PCC_T_IND)
/**** End of this part *************************************/

#define FF_TDA_SET_CARD_POWER_DOWN_REQ          MC_PCC_FUNCTION_TYPE (TDA_SET_CARD_POWER_DOWN,PCC_T_REQ)
#define FF_TDA_SET_CARD_POWER_DOWN_CNF      	MC_PCC_FUNCTION_TYPE (TDA_SET_CARD_POWER_DOWN,PCC_T_CNF)

/**************************** Errors constants *****************************************/

#define TDA_PROTOCOL_ERROR_MASK      	0xFF  	/* Only use by SAP, can be deleted */
#define TDA_CHIP_ERROR_MASK          	0xFF  	/* Only use by SAP, can be deleted */

#define TDA_NO_ERROR	             	0x00	/* No Error */

#define TDA_ATR_FAILED	             	0x01 	/* Bad response during ATR */
#define TDA_PTS_FAILED	             	0x02	/* Bad response during PPS */

#define TDA_PROCEDURE_BYTE_ERROR     	0x03	/* Bad response during normale communication */
#define TDA_WTO                      	0x04	/* No response during normale communication */

/* Electronic error from chip TDA8003 */
#define TDA_MUTE	             	0x05	/* Card doesnn't send ATR */
#define TDA_EARLY	             	0x06	/* Card send ATR too quickly */
#define TDA_SUPL	             	0x07	/* VBAT falls on interface */
#define TDA_PROT	             	0x08	/* VBAT falls on interface */

#define TDA_ATR_FAILED_WTO	     	0x09	/* No response during ATR */
#define TDA_PTS_FAILED_WTO	     	0x0A	/* No response during PPS */

#define TDA_PAR                      	0x0B	/* Parity error */

#define TDA_PROCEDURE_BYTE_ERROR_ATR 	0x0C	/* We have probably receive the ATR 
						   instead of a procedure byte */

/* LMSdv94298 - 20/08/03 - tcmc_wbm */
#if defined (SIM_HOT_PLUG_FTR)
#define TDA_SIM_CARD_MISSING		    0x0D	/* SAP must use the same constant */
#endif
/* End LMSdv94298 */

/*** Parameters for TDA_RESET_CARD_REQ and TDA_RESET_CARD_CNF message ***/

#define TDA_VOLTAGE_MASK        	0x03
#define TDA_SIM5V	        	(0<<0)
#define TDA_SIM3V	        	(1<<0)
#define TDA_SIM1_8V                     (1<<1)

#define TDA_RESET_MASK          	0x04
#define TDA_RESET_COLD	        	(0<<2)
#define TDA_RESET_WARM	        	(1<<2)

#define TDA_ATR_MASK            	0x08
#define TDA_NO_ATR_RSP	        	(0<<3)
#define TDA_ATR_RSP	        	(1<<3)

/*** Parameters of TDA_SET_CARD_CLOCK_REQ message ***/
/****************************************************/

#define TDA_NORMAL_MASK 		0x06
#define NORMAL_HIGH     		(1<<1)     	/* 01 = Fxtal/4 during the normal communication mode */
#define NORMAL_LOW      		(2<<1)		/* 10 = Fxtal/8 during the normal communication mode */

#define TDA_SLEEP_MASK  		0x18
#define SLEEP_LOW      			(0<<3)		/* 00 = Clk stopped low during the sleep mode */
#define SLEEP_FINT     			(1<<3)		/* 01 = Fint/2 during the sleep mode */
#define SLEEP_HIGH     			(2<<3)		/* 10 = Clk stopped high during the sleep mode */

/*** Parameters of TDA_SET_POWER_DOWN_REQ message ***/
/****************************************************/
#define TDA_DISABLE_POWER_DOWN		0x00
#define TDA_ENABLE_POWER_DOWN		0x01

/***********************/
/* LENGTH OF STRUCTURE */
/***********************/

#define LGTH_T_MSG_HEADER 			sizeof (t_MsgHeader)
#define LGTH_T_TDA_HEADER_SIM_INSTRUCTION	sizeof (t_TDAHeaderSIMInstruction)

#define LGTH_T_TDA_ANSWER_FROM_CARD_NO_DATA	(LGTH_T_MSG_HEADER + 2)
#define LGTH_T_TDA_ANSWER_FROM_CARD_ONE_DATA	(LGTH_T_TDA_ANSWER_FROM_CARD_NO_DATA + 1)

/******************************* Miscellaneous *******************************/

/******************************* Event ***************************************/

#define HSMC_INTERFACE_EVENT			PROCESS_HSMC_EVENT_0_NUMBER
#define HSMC_INTERNAL_EVENT			PROCESS_HSMC_EVENT_1_NUMBER

#define HSMC_INTERFACE_BIT			( 1 << PROCESS_HSMC_EVENT_0_NUMBER )
#define HSMC_INTERNAL_BIT			( 1 << PROCESS_HSMC_EVENT_1_NUMBER )
 
#endif /* HSMC_HEC */