📄 printer.plg
字号:
<html>
<body>
<pre>
<h1>礦ision3 Build Log</h1>
<h2>Project:</h2>
E:\Arm\AppliCation\printer_old\uart.uv2
Project File Date: 02/06/2008
<h2>Output:</h2>
Build target 'MCB2300'
compiling uart.c...
uart.c(17): error: #147: declaration is incompatible with "void init_uart(void)" (declared at line 38 of "uart.h")
compiling spi.c...
spi.h(24): warning: #1-D: last line of file ends without a newline
compiling display.c...
compiling irq.c...
compiling timer.c...
compiling KeyBoard.c...
compiling target.c...
compiling rtc.c...
compiling printer.c...
compiling adc.c...
assembling Startup.s...
assembling swi_handler.s...
Target not created
Build target 'MCB2300'
compiling uart.c...
uart.c(17): error: #147: declaration is incompatible with "void init_uart(void)" (declared at line 38 of "uart.h")
compiling spi.c...
spi.h(25): warning: #1-D: last line of file ends without a newline
compiling display.c...
compiling irq.c...
compiling timer.c...
compiling KeyBoard.c...
compiling target.c...
compiling rtc.c...
compiling printer.c...
compiling adc.c...
compiling test_main.c...
test_main.c(1): error: #40: expected an identifier
C:\Keil\ARM\RV30\INC\stdio.h(301): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(382): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(402): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(529): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(554): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(689): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(690): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(690): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(705): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(706): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(721): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(722): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(722): error: #20: identifier "size_t" is undefined
spi.h(25): warning: #1-D: last line of file ends without a newline
test_main.c(20): warning: #177-D: variable "cnt" was declared but never referenced
test_main.c(20): warning: #177-D: variable "send_cnt" was declared but never referenced
test_main.c(21): warning: #177-D: variable "i" was declared but never referenced
test_main.c(22): warning: #177-D: variable "t_buff" was declared but never referenced
test_main.c(23): warning: #177-D: variable "time" was declared but never referenced
test_main.c(23): warning: #177-D: variable "current_time" was declared but never referenced
assembling Startup.s...
assembling swi_handler.s...
Target not created
Build target 'MCB2300'
compiling uart.c...
uart.c(17): error: #147: declaration is incompatible with "void init_uart(void)" (declared at line 38 of "uart.h")
compiling spi.c...
spi.h(25): warning: #1-D: last line of file ends without a newline
compiling display.c...
compiling irq.c...
compiling timer.c...
compiling KeyBoard.c...
compiling target.c...
compiling rtc.c...
compiling printer.c...
compiling adc.c...
compiling test_main.c...
test_main.c(1): error: #40: expected an identifier
C:\Keil\ARM\RV30\INC\stdio.h(301): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(382): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(402): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(529): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(554): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(689): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(690): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(690): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(705): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(706): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(721): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(722): error: #20: identifier "size_t" is undefined
C:\Keil\ARM\RV30\INC\stdio.h(722): error: #20: identifier "size_t" is undefined
spi.h(25): warning: #1-D: last line of file ends without a newline
test_main.c(21): warning: #177-D: variable "cnt" was declared but never referenced
test_main.c(21): warning: #177-D: variable "send_cnt" was declared but never referenced
test_main.c(22): warning: #177-D: variable "i" was declared but never referenced
test_main.c(23): warning: #177-D: variable "t_buff" was declared but never referenced
test_main.c(24): warning: #177-D: variable "time" was declared but never referenced
test_main.c(24): warning: #177-D: variable "current_time" was declared but never referenced
assembling Startup.s...
assembling swi_handler.s...
Target not created
Build target 'MCB2300'
compiling uart.c...
uart.c(17): error: #147: declaration is incompatible with "void init_uart(void)" (declared at line 38 of "uart.h")
compiling spi.c...
spi.h(25): warning: #1-D: last line of file ends without a newline
compiling display.c...
compiling irq.c...
compiling timer.c...
compiling KeyBoard.c...
compiling target.c...
compiling rtc.c...
compiling printer.c...
compiling adc.c...
compiling test_main.c...
test_main.c(1): error: #40: expected an identifier
type.h(27): warning: #12-D: parsing restarts here after previous syntax error
uart.h(39): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(41): error: #20: identifier "BYTE" is undefined
spi.h(20): error: #20: identifier "BYTE" is undefined
spi.h(21): error: #20: identifier "BYTE" is undefined
spi.h(22): error: #20: identifier "BYTE" is undefined
spi.h(23): error: #20: identifier "BYTE" is undefined
spi.h(23): error: #20: identifier "BYTE" is undefined
spi.h(25): warning: #1-D: last line of file ends without a newline
timer.h(20): error: #20: identifier "BYTE" is undefined
timer.h(21): error: #20: identifier "BYTE" is undefined
timer.h(22): error: #20: identifier "BYTE" is undefined
timer.h(23): error: #20: identifier "BYTE" is undefined
timer.h(24): error: #20: identifier "BYTE" is undefined
test_main.c(23): error: #20: identifier "BYTE" is undefined
test_main.c(21): warning: #177-D: variable "cnt" was declared but never referenced
test_main.c(21): warning: #177-D: variable "send_cnt" was declared but never referenced
test_main.c(22): warning: #177-D: variable "i" was declared but never referenced
test_main.c(23): warning: #177-D: variable "t_buff" was declared but never referenced
test_main.c(24): warning: #177-D: variable "time" was declared but never referenced
test_main.c(24): warning: #177-D: variable "current_time" was declared but never referenced
assembling Startup.s...
assembling swi_handler.s...
Target not created
Build target 'MCB2300'
compiling uart.c...
uart.c(17): error: #147: declaration is incompatible with "void init_uart(void)" (declared at line 38 of "uart.h")
compiling spi.c...
spi.h(25): warning: #1-D: last line of file ends without a newline
compiling display.c...
compiling irq.c...
compiling timer.c...
compiling KeyBoard.c...
compiling target.c...
compiling rtc.c...
compiling printer.c...
compiling adc.c...
compiling test_main.c...
test_main.c(1): error: #40: expected an identifier
type.h(27): warning: #12-D: parsing restarts here after previous syntax error
uart.h(39): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(41): error: #20: identifier "BYTE" is undefined
spi.h(20): error: #20: identifier "BYTE" is undefined
spi.h(21): error: #20: identifier "BYTE" is undefined
spi.h(22): error: #20: identifier "BYTE" is undefined
spi.h(23): error: #20: identifier "BYTE" is undefined
spi.h(23): error: #20: identifier "BYTE" is undefined
spi.h(25): warning: #1-D: last line of file ends without a newline
timer.h(20): error: #20: identifier "BYTE" is undefined
timer.h(21): error: #20: identifier "BYTE" is undefined
timer.h(22): error: #20: identifier "BYTE" is undefined
timer.h(23): error: #20: identifier "BYTE" is undefined
timer.h(24): error: #20: identifier "BYTE" is undefined
test_main.c(21): warning: #177-D: variable "cnt" was declared but never referenced
test_main.c(21): warning: #177-D: variable "send_cnt" was declared but never referenced
assembling Startup.s...
assembling swi_handler.s...
Target not created
Build target 'MCB2300'
compiling uart.c...
uart.c(17): error: #147: declaration is incompatible with "void init_uart(void)" (declared at line 38 of "uart.h")
compiling spi.c...
spi.h(25): warning: #1-D: last line of file ends without a newline
compiling display.c...
compiling irq.c...
compiling timer.c...
compiling KeyBoard.c...
compiling target.c...
compiling rtc.c...
compiling printer.c...
compiling adc.c...
compiling test_main.c...
test_main.c(1): error: #40: expected an identifier
type.h(27): warning: #12-D: parsing restarts here after previous syntax error
uart.h(39): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(41): error: #20: identifier "BYTE" is undefined
spi.h(20): error: #20: identifier "BYTE" is undefined
spi.h(21): error: #20: identifier "BYTE" is undefined
spi.h(22): error: #20: identifier "BYTE" is undefined
spi.h(23): error: #20: identifier "BYTE" is undefined
spi.h(23): error: #20: identifier "BYTE" is undefined
spi.h(25): warning: #1-D: last line of file ends without a newline
timer.h(20): error: #20: identifier "BYTE" is undefined
timer.h(21): error: #20: identifier "BYTE" is undefined
timer.h(22): error: #20: identifier "BYTE" is undefined
timer.h(23): error: #20: identifier "BYTE" is undefined
timer.h(24): error: #20: identifier "BYTE" is undefined
test_main.c(21): warning: #177-D: variable "cnt" was declared but never referenced
test_main.c(21): warning: #177-D: variable "send_cnt" was declared but never referenced
assembling Startup.s...
assembling swi_handler.s...
Target not created
Build target 'MCB2300'
compiling uart.c...
uart.c(17): error: #147: declaration is incompatible with "void init_uart(void)" (declared at line 38 of "uart.h")
compiling spi.c...
spi.h(24): warning: #1-D: last line of file ends without a newline
compiling display.c...
compiling irq.c...
compiling timer.c...
compiling KeyBoard.c...
compiling target.c...
compiling rtc.c...
compiling printer.c...
compiling adc.c...
compiling test_main.c...
test_main.c(1): error: #40: expected an identifier
type.h(27): warning: #12-D: parsing restarts here after previous syntax error
uart.h(39): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(41): error: #20: identifier "BYTE" is undefined
spi.h(19): error: #20: identifier "BYTE" is undefined
spi.h(20): error: #20: identifier "BYTE" is undefined
spi.h(21): error: #20: identifier "BYTE" is undefined
spi.h(22): error: #20: identifier "BYTE" is undefined
spi.h(22): error: #20: identifier "BYTE" is undefined
spi.h(24): warning: #1-D: last line of file ends without a newline
timer.h(20): error: #20: identifier "BYTE" is undefined
timer.h(21): error: #20: identifier "BYTE" is undefined
timer.h(22): error: #20: identifier "BYTE" is undefined
timer.h(23): error: #20: identifier "BYTE" is undefined
timer.h(24): error: #20: identifier "BYTE" is undefined
test_main.c(21): warning: #177-D: variable "cnt" was declared but never referenced
test_main.c(21): warning: #177-D: variable "send_cnt" was declared but never referenced
assembling Startup.s...
assembling swi_handler.s...
Target not created
Build target 'MCB2300'
compiling uart.c...
compiling spi.c...
spi.h(24): warning: #1-D: last line of file ends without a newline
compiling display.c...
compiling irq.c...
compiling timer.c...
compiling KeyBoard.c...
compiling target.c...
compiling rtc.c...
compiling printer.c...
compiling adc.c...
compiling test_main.c...
test_main.c(1): error: #40: expected an identifier
type.h(27): warning: #12-D: parsing restarts here after previous syntax error
uart.h(39): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(40): error: #20: identifier "BYTE" is undefined
uart.h(41): error: #20: identifier "BYTE" is undefined
spi.h(19): error: #20: identifier "BYTE" is undefined
spi.h(20): error: #20: identifier "BYTE" is undefined
spi.h(21): error: #20: identifier "BYTE" is undefined
spi.h(22): error: #20: identifier "BYTE" is undefined
spi.h(22): error: #20: identifier "BYTE" is undefined
spi.h(24): warning: #1-D: last line of file ends without a newline
timer.h(20): error: #20: identifier "BYTE" is undefined
timer.h(21): error: #20: identifier "BYTE" is undefined
timer.h(22): error: #20: identifier "BYTE" is undefined
timer.h(23): error: #20: identifier "BYTE" is undefined
timer.h(24): error: #20: identifier "BYTE" is undefined
test_main.c(21): warning: #177-D: variable "cnt" was declared but never referenced
test_main.c(21): warning: #177-D: variable "send_cnt" was declared but never referenced
assembling Startup.s...
assembling swi_handler.s...
Target not created
Build target 'MCB2300'
compiling uart.c...
compiling spi.c...
spi.h(24): warning: #1-D: last line of file ends without a newline
compiling display.c...
compiling irq.c...
compiling timer.c...
compiling KeyBoard.c...
compiling target.c...
compiling rtc.c...
compiling printer.c...
compiling adc.c...
compiling test_main.c...
test_main.c(1): error: #40: expected an identifier
type.h(27): warning: #12-D: parsing restarts here after previous syntax error
uart.h(41): error: #20: identifier "BYTE" is undefined
uart.h(42): error: #20: identifier "BYTE" is undefined
uart.h(42): error: #20: identifier "BYTE" is undefined
uart.h(43): error: #20: identifier "BYTE" is undefined
spi.h(19): error: #20: identifier "BYTE" is undefined
spi.h(20): error: #20: identifier "BYTE" is undefined
spi.h(21): error: #20: identifier "BYTE" is undefined
spi.h(22): error: #20: identifier "BYTE" is undefined
spi.h(22): error: #20: identifier "BYTE" is undefined
spi.h(24): warning: #1-D: last line of file ends without a newline
timer.h(20): error: #20: identifier "BYTE" is undefined
timer.h(21): error: #20: identifier "BYTE" is undefined
timer.h(22): error: #20: identifier "BYTE" is undefined
timer.h(23): error: #20: identifier "BYTE" is undefined
timer.h(24): error: #20: identifier "BYTE" is undefined
test_main.c(21): warning: #177-D: variable "cnt" was declared but never referenced
test_main.c(21): warning: #177-D: variable "send_cnt" was declared but never referenced
assembling Startup.s...
assembling swi_handler.s...
Target not created
Build target 'MCB2300'
compiling uart.c...
compiling spi.c...
spi.h(23): warning: #1-D: last line of file ends without a newline
compiling display.c...
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -