msp430x22x4_ta_05.c

C280x C/C++ Header Files and Peripheral Examples The DSP28xx C/C++ peripheral header files and exam

//******************************************************************************
//  MSP430F22x4 Demo - Timer_A, Toggle P1.0, TACCR0 Up Mode ISR, 32kHz ACLK
//
//  Description: Toggle P1.0 using software and the TA_0 ISR. Timer_A is
//  configured for up mode, thus the the timer overflows when TAR counts
//  to TACCR0. In this example TACCR0 is loaded with 1000-1.
//  ACLK = TACLK = LFXT1 = 32768Hz, MCLK = SMCLK = default DCO ~1.2MHz
//  //* An external watch crystal on XIN XOUT is required for ACLK *//
//
//               MSP430F22x4
//            -----------------
//        /|\|              XIN|-
//         | |                 | 32kHz
//         --|RST          XOUT|-
//           |                 |
//           |             P1.0|-->LED
//
//  P.Thanigai
//  Texas Instruments Inc.
//  August 2007
//  Built with Code Composer Essentials Version: 2.0
//******************************************************************************
#include "msp430x22x4.h"

void main(void)
{
  WDTCTL = WDTPW + WDTHOLD;                 // Stop WDT
  P1DIR |= 0x01;                            // P1.0 output
  TACCTL0 = CCIE;                           // TACCR0 interrupt enabled
  TACCR0 = 1000 - 1;
  TACTL = TASSEL_1 + MC_1;                  // ACLK, upmode

  __bis_SR_register(LPM3_bits + GIE);       // Enter LPM3 w/ interrupt
}

// Timer A0 interrupt service routine
__interrupt void Timer_A(void);
TIMERA0_ISR(Timer_A)
__interrupt void Timer_A(void)
{
  P1OUT ^= 0x01;                            // Toggle P1.0
}