app.c

基于NesC/TinyOS的无线传感器网络测量节点源码

static   result_t UARTM$HPLUART$get(uint8_t arg_0x1a634b18);







static   result_t UARTM$HPLUART$putDone(void);
# 34 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ByteComm.nc"
static   result_t UARTM$ByteComm$txByte(uint8_t arg_0x1ad5e578);
# 41 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t UARTM$Control$init(void);






static  result_t UARTM$Control$start(void);
# 27 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\RealMain.nc"
static  result_t RealMain$hardwareInit(void);
# 57 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Pot.nc"
static  result_t RealMain$Pot$init(uint8_t arg_0x1a531bb0);
# 41 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t RealMain$StdControl$init(void);






static  result_t RealMain$StdControl$start(void);
# 34 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\RealMain.nc"
int main(void)   ;
# 53 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\HPLPot.nc"
static  result_t PotM$HPLPot$finalise(void);
#line 38
static  result_t PotM$HPLPot$decrease(void);







static  result_t PotM$HPLPot$increase(void);
# 70 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\PotM.nc"
uint8_t PotM$potSetting;

static inline void PotM$setPot(uint8_t value);
#line 85
static inline  result_t PotM$Pot$init(uint8_t initialSetting);
# 37 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\atm1281\\HPLPotC.nc"
static inline  result_t HPLPotC$Pot$decrease(void);








static inline  result_t HPLPotC$Pot$increase(void);








static inline  result_t HPLPotC$Pot$finalise(void);
# 37 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\atm1281\\HPLInit.nc"
static inline  result_t HPLInit$init(void);
# 40 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\HPLUART.nc"
static   result_t SensorNodeM$HPLUART$init(void);
# 22 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\sensorboards\\mda320\\Dio.nc"
static  result_t SensorNodeM$Dio2$low(void);
#line 21
static  result_t SensorNodeM$Dio2$high(void);
# 37 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
static  result_t SensorNodeM$Timer3$start(char arg_0x1a5b0720, uint32_t arg_0x1a5b08b8);
# 26 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\SendMsg.nc"
static  result_t SensorNodeM$Send$send(uint16_t arg_0x1a605d88, uint8_t arg_0x1a605f10, TOS_MsgPtr arg_0x1a5e30b0);
# 26 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\sensorboards\\mda320\\ADConvert.nc"
static  result_t SensorNodeM$Soilsensor2$getData(void);
# 22 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\sensorboards\\mda320\\Dio.nc"
static  result_t SensorNodeM$Dio0$low(void);
#line 21
static  result_t SensorNodeM$Dio0$high(void);
# 30 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ADC.nc"
static   result_t SensorNodeM$Battery$getData(void);
# 37 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
static  result_t SensorNodeM$Timer1$start(char arg_0x1a5b0720, uint32_t arg_0x1a5b08b8);
# 27 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\sensorboards\\mda320\\Dio.nc"
static  result_t SensorNodeM$Dio3$setparam(uint8_t arg_0x1a630c48);
# 41 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t SensorNodeM$CommControl$init(void);






static  result_t SensorNodeM$CommControl$start(void);
# 26 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\sensorboards\\mda320\\ADConvert.nc"
static  result_t SensorNodeM$Soilsensor0$getData(void);
# 35 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Leds.nc"
static   result_t SensorNodeM$Leds$init(void);
#line 110
static   result_t SensorNodeM$Leds$yellowToggle(void);
#line 60
static   result_t SensorNodeM$Leds$redToggle(void);
# 41 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t SensorNodeM$IBADCcontrol$init(void);






static  result_t SensorNodeM$IBADCcontrol$start(void);
# 26 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\sensorboards\\mda320\\ADConvert.nc"
static  result_t SensorNodeM$Soilsensor3$getData(void);
# 37 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
static  result_t SensorNodeM$Timer2$start(char arg_0x1a5b0720, uint32_t arg_0x1a5b08b8);








static  result_t SensorNodeM$Timer2$stop(void);
# 41 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t SensorNodeM$BatteryControl$init(void);






static  result_t SensorNodeM$BatteryControl$start(void);
#line 41
static  result_t SensorNodeM$DioControl$init(void);






static  result_t SensorNodeM$DioControl$start(void);
# 22 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\sensorboards\\mda320\\Dio.nc"
static  result_t SensorNodeM$Dio1$low(void);
#line 21
static  result_t SensorNodeM$Dio1$high(void);
# 26 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\sensorboards\\mda320\\ADConvert.nc"
static  result_t SensorNodeM$Soilsensor1$getData(void);
# 27 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\sensorboards\\mda320\\Dio.nc"
static  result_t SensorNodeM$Dio4$setparam(uint8_t arg_0x1a630c48);
# 100 "C:\\Crossbow\\cygwin\\opt\\Moteworks\\apps\\Field\\field_1\\SensorNodeM.nc"
enum SensorNodeM$__nesc_unnamed4285 {
  SensorNodeM$ASCII_CR = 0x0d, 
  SensorNodeM$ASCII_SP = 0x20, 
  SensorNodeM$ASCII_0 = 0x30
};

enum SensorNodeM$__nesc_unnamed4286 {
  SensorNodeM$NOECTE = 0x00, 
  SensorNodeM$SOILSENSOR0EX = 0x01, 
  SensorNodeM$SOILSENSOR0GD = 0x02, 
  SensorNodeM$SOILSENSOR1EX = 0x03, 
  SensorNodeM$SOILSENSOR1GD = 0x04, 
  SensorNodeM$SOILSENSOR2EX = 0x05, 
  SensorNodeM$SOILSENSOR2GD = 0x06, 
  SensorNodeM$SOILSENSOR3EX = 0x07, 
  SensorNodeM$SOILSENSOR3GD = 0x08, 
  SensorNodeM$BATTERY = 0x09
};

enum SensorNodeM$__nesc_unnamed4287 {
  SensorNodeM$DIGI0 = 0x00, 
  SensorNodeM$DIGI1 = 0x01
};

enum SensorNodeM$__nesc_unnamed4288 {
  SensorNodeM$MAX_DATUM_DIGITS = 4
};

enum SensorNodeM$__nesc_unnamed4289 {
  SensorNodeM$UART_BUF_MAXLEN = 15
};

TOS_Msg SensorNodeM$msg_buffer;

XDataMsg *SensorNodeM$pack;

uint8_t SensorNodeM$databuffer[22];
uint8_t SensorNodeM$measured = 0;
#line 137
uint8_t SensorNodeM$day = 0;
uint8_t SensorNodeM$uartBufCount = 0;
uint8_t SensorNodeM$uartBuf[SensorNodeM$UART_BUF_MAXLEN - 1];
uint8_t SensorNodeM$state;

uint8_t SensorNodeM$datastore[12][22];
uint8_t SensorNodeM$rstIndex;

bool SensorNodeM$EX_ON = TRUE;
bool SensorNodeM$EX_OFF = FALSE;

bool SensorNodeM$sending_packet = FALSE;

bool SensorNodeM$bufData_tx = FALSE;

bool SensorNodeM$fromExcitation = FALSE;
bool SensorNodeM$inited = FALSE;






static void SensorNodeM$Excitation_33(bool Ex_Status);
#line 176
static void SensorNodeM$Excitation_25(bool Ex_Status);
#line 191
static  void SensorNodeM$send_msg(void);
#line 218
static inline  void SensorNodeM$dataProcess(void);
#line 272
static inline  result_t SensorNodeM$StdControl$init(void);
#line 286
static inline  result_t SensorNodeM$StdControl$start(void);
#line 319
static inline  result_t SensorNodeM$Send$sendDone(TOS_MsgPtr msg, result_t success);
#line 352
static inline  TOS_MsgPtr SensorNodeM$Receive$receive(TOS_MsgPtr data);
#line 371
static inline  result_t SensorNodeM$Soilsensor0$dataReady(uint16_t data);










static inline  result_t SensorNodeM$Soilsensor1$dataReady(uint16_t data);
#line 394
static inline  result_t SensorNodeM$Soilsensor2$dataReady(uint16_t data);
#line 407
static inline  result_t SensorNodeM$Soilsensor3$dataReady(uint16_t data);
#line 420
static inline   result_t SensorNodeM$Battery$dataReady(uint16_t data);
#line 434
static inline   result_t SensorNodeM$HPLUART$get(uint8_t data);
#line 457
static inline  result_t SensorNodeM$Timer1$fired(void);
#line 479
static inline  result_t SensorNodeM$Timer2$fired(void);
#line 520
static inline  result_t SensorNodeM$Timer3$fired(void);
#line 545
static inline   result_t SensorNodeM$HPLUART$putDone(void);






static inline  result_t SensorNodeM$Dio0$dataReady(uint16_t data);



static inline  result_t SensorNodeM$Dio1$dataReady(uint16_t data);
#line 568
static inline  result_t SensorNodeM$Dio2$dataReady(uint16_t data);
#line 580
static inline  result_t SensorNodeM$Dio3$dataReady(uint16_t data);
#line 595
static inline  result_t SensorNodeM$Dio4$dataReady(uint16_t data);
# 19 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\PowerManagement.nc"
static   uint8_t TimerM$PowerManagement$adjustPower(void);
# 84 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Clock.nc"
static   void TimerM$Clock$setInterval(uint8_t arg_0x1a725da8);
#line 132
static   uint8_t TimerM$Clock$readCounter(void);
#line 75
static   result_t TimerM$Clock$setRate(char arg_0x1a725010, char arg_0x1a725190);
#line 100
static   uint8_t TimerM$Clock$getInterval(void);
# 51 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
static  result_t TimerM$Timer$fired(
# 26 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\TimerM.nc"
uint8_t arg_0x1a716c68);









uint32_t TimerM$mState;
uint8_t TimerM$setIntervalFlag;
uint8_t TimerM$mScale;
#line 38
uint8_t TimerM$mInterval;
int8_t TimerM$queue_head;
int8_t TimerM$queue_tail;
uint8_t TimerM$queue_size;
uint8_t TimerM$queue[NUM_TIMERS];
volatile uint16_t TimerM$interval_outstanding;





#line 45
struct TimerM$timer_s {
  uint8_t type;
  int32_t ticks;
  int32_t ticksLeft;
} TimerM$mTimerList[NUM_TIMERS];

enum TimerM$__nesc_unnamed4290 {
  TimerM$maxTimerInterval = 230
};
static  result_t TimerM$StdControl$init(void);









static inline  result_t TimerM$StdControl$start(void);










static  result_t TimerM$Timer$start(uint8_t id, char type, 
uint32_t interval);
#line 106
inline static void TimerM$adjustInterval(void);
#line 145
static inline  result_t TimerM$Timer$stop(uint8_t id);
#line 159
static inline   result_t TimerM$Timer$default$fired(uint8_t id);



static inline void TimerM$enqueue(uint8_t value);







static inline uint8_t TimerM$dequeue(void);









static inline  void TimerM$signalOneTimer(void);





static inline  void TimerM$HandleFire(void);
#line 230
static inline   result_t TimerM$Clock$fire(void);
# 159 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Clock.nc"
static   result_t HPLClock$Clock$fire(void);
# 37 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\atm1281\\HPLClock.nc"
uint8_t HPLClock$set_flag;
uint8_t HPLClock$mscale;
#line 38
uint8_t HPLClock$nextScale;
#line 38
uint8_t HPLClock$minterval;
#line 70
static inline   void HPLClock$Clock$setInterval(uint8_t value);









static inline   uint8_t HPLClock$Clock$getInterval(void);
#line 108
static inline   result_t HPLClock$Clock$setIntervalAndScale(uint8_t interval, uint8_t scale);
#line 136
static inline   uint8_t HPLClock$Clock$readCounter(void);
#line 157
static inline   result_t HPLClock$Clock$setRate(char interval, char scale);






void __vector_13(void)   __attribute((interrupt)) ;
# 48 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\micazc\\HPLPowerManagementM.nc"
bool HPLPowerManagementM$disabled = TRUE;
#line 61
static inline uint8_t HPLPowerManagementM$getPowerLevel(void);
#line 114
static inline  void HPLPowerManagementM$doAdjustment(void);
#line 134
static   uint8_t HPLPowerManagementM$PowerManagement$adjustPower(void);
# 28 "C:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\LedsC.nc"
uint8_t LedsC$ledsOn;

enum LedsC$__nesc_unnamed4291 {
  LedsC$RED_BIT = 1, 
  LedsC$GREEN_BIT = 2, 
  LedsC$YELLOW_BIT = 4
};

static   result_t LedsC$Leds$init(void);
#line 50
static inline   result_t LedsC$Leds$redOn(void);








static inline   result_t LedsC$Leds$redOff(void);








static   result_t LedsC$Leds$redToggle(void);
#line 108
static inline   result_t LedsC$Leds$yellowOn(void);








static inline   result_t LedsC$Leds$yellowOff(void);