usbdrv.c

来自「Source code for RFM01 fm radio receiver」· C语言 代码 · 共 508 行 · 第 1/2 页

/* Name: usbdrv.c
 * Project: AVR USB driver
 * Author: Christian Starkjohann
 * Creation Date: 2004-12-29
 * Tabsize: 4
 * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
 * License: Proprietary, free under certain conditions. See Documentation.
 * This Revision: $Id: usbdrv.c 135 2006-02-20 13:59:06Z cs $
 */

#include <avr/io.h>
#include <avr/pgmspace.h>
#include "../usbdrv.h"

/*
General Description:
This module implements the C-part of the USB driver. See usbdrv.h for a
documentation of the entire driver.
*/

/* ------------------------------------------------------------------------- */

/* raw USB registers / interface to assembler code: */
/* USBRDV_RxBuf MUST be in 1 byte addressable range (because USBRDV_InputBuf is only 1 byte) */
uchar       USBRDV_RxBuf[2][USBRDV_BUFSIZE] __attribute__ ((section (USBRDV_BUFFER_SECTION)));/* raw RX buffer: PID, 8 bytes data, 2 bytes CRC */
uchar       USBRDV_DeviceId;        /* assigned during enumeration, defaults to 0 */
uchar       USBRDV_Configuration;   /* currently selected configuration. Administered by driver, but not used */
uchar       USBRDV_InputBuf;        /* ptr to raw buffer used for receiving */
uchar       USBRDV_AppBuf;          /* ptr to raw buffer passed to app for processing */
volatile char USBRDV_RxLen;         /* = 0; number of bytes in USBRDV_AppBuf; 0 means free */
uchar       USBRDV_CurrentTok;      /* last token received */
uchar       USBRDV_RxToken;         /* token for data we received */
uchar       USBRDV_MsgLen = 0xff;   /* remaining number of bytes, no msg to send if -1 (see USBRDV_MsgPtr) */
volatile char USBRDV_TxLen = -1;    /* number of bytes to transmit with next IN token */
uchar       USBRDV_TxBuf[USBRDV_BUFSIZE];/* data to transmit with next IN, free if USBRDV_TxLen == -1 */
#if USBRDV_CFG_HAVE_INTRIN_ENDPOINT
/* uchar       USBRDV_RxEndp;          endpoint which was addressed (1 bit in MSB) [not impl] */
volatile char USBRDV_TxLen1 = -1;   /* TX count for endpoint 1 */
uchar       USBRDV_TxBuf1[USBRDV_BUFSIZE];/* TX data for endpoint 1 */
#endif
uchar       USBRDV_AckBuf[1] = {USBPID_ACK};    /* transmit buffer for ack tokens */
uchar       USBRDV_NakBuf[1] = {USBPID_NAK};    /* transmit buffer for nak tokens */

/* USB status registers / not shared with asm code */
uchar           *USBRDV_MsgPtr;     /* data to transmit next -- ROM or RAM address */
static uchar    USBRDV_MsgFlags;    /* flag values see below */
static uchar    USBRDV_NewDeviceId; /* = 0; device ID which should be set after status phase */
static uchar    USBRDV_IsReset;     /* = 0; USB bus is in reset phase */

#define USBRDV_FLG_TX_PACKET       (1<<0)
/* Leave free 6 bits after TX_PACKET. This way we can increment USBRDV_MsgFlags to toggle TX_PACKET */
#define USBRDV_FLG_MSGPTR_IS_ROM   (1<<6)
#define USBRDV_FLG_USE_DEFAULT_RW  (1<<7)

/*
optimizing hints:
- do not post/pre inc/dec integer values in operations
- assign value of PRG_RDB() to register variables and don't use side effects in arg
- use narrow scope for variables which should be in X/Y/Z register
- assign char sized expressions to variables to force 8 bit arithmetics
*/

/* ------------------------------------------------------------------------- */

static char USBRDV_DescrDevice[] PROGMEM = {    /* USB device descriptor */
    18,         /* sizeof(USBRDV_DescrDevice): length of descriptor in bytes */
    USBDESCR_DEVICE,    /* descriptor type */
    0x01, 0x01, /* USB version supported */
    USBRDV_CFG_DEVICE_CLASS,
    USBRDV_CFG_DEVICE_SUBCLASS,
    0,          /* protocol */
    8,          /* max packet size */
    USBRDV_CFG_VENDOR_ID,  /* 2 bytes */
    USBRDV_CFG_DEVICE_ID,  /* 2 bytes */
    USBRDV_CFG_DEVICE_VERSION, /* 2 bytes */
#if USBRDV_CFG_VENDOR_NAME_LEN
    1,          /* manufacturer string index */
#else
    0,          /* manufacturer string index */
#endif
#if USBRDV_CFG_DEVICE_NAME_LEN
    2,          /* product string index */
#else
    0,          /* product string index */
#endif
#if USBRDV_CFG_SERIAL_NUMBER_LENGTH
    3,          /* serial number string index */
#else
    0,          /* serial number string index */
#endif
    1,          /* number of configurations */
};

static char USBRDV_DescrConfig[] PROGMEM = {    /* USB configuration descriptor */
    9,          /* sizeof(USBRDV_DescrConfig): length of descriptor in bytes */
    USBDESCR_CONFIG,    /* descriptor type */
    (18 + 7 * USBRDV_CFG_HAVE_INTRIN_ENDPOINT
#if USBRDV_CFG_HID_REPORT_DESCRIPTOR_LENGTH
     + 9
#endif
        ), 0,   /* total length of data returned (including inlined descriptors) */
    1,          /* number of interfaces in this configuration */
    1,          /* index of this configuration */
    0,          /* configuration name string index */
#if USBRDV_CFG_IS_SELF_POWERED
    USBATTR_SELFPOWER,  /* attributes */
#else
    USBATTR_BUSPOWER,   /* attributes */
#endif
    USBRDV_CFG_MAX_BUS_POWER/2,            /* max USB current in 2mA units */
/* interface descriptor follows inline: */
    9,          /* sizeof(USBRDV_DescrInterface): length of descriptor in bytes */
    USBDESCR_INTERFACE, /* descriptor type */
    0,          /* index of this interface */
    0,          /* alternate setting for this interface */
    USBRDV_CFG_HAVE_INTRIN_ENDPOINT,   /* endpoints excl 0: number of endpoint descriptors to follow */
    USBRDV_CFG_INTERFACE_CLASS,
    USBRDV_CFG_INTERFACE_SUBCLASS,
    USBRDV_CFG_INTERFACE_PROTOCOL,
    0,          /* string index for interface */
#if USBRDV_CFG_HID_REPORT_DESCRIPTOR_LENGTH    /* HID descriptor */
    9,          /* sizeof(USBRDV_DescrHID): length of descriptor in bytes */
    USBDESCR_HID,   /* descriptor type: HID */
    0x01, 0x01, /* BCD representation of HID version */
    0x00,       /* target country code */
    0x01,       /* number of HID Report (or other HID class) Descriptor infos to follow */
    0x22,       /* descriptor type: report */
    USBRDV_CFG_HID_REPORT_DESCRIPTOR_LENGTH, 0,  /* total length of report descriptor */
#endif
#if USBRDV_CFG_HAVE_INTRIN_ENDPOINT    /* endpoint descriptor for endpoint 1 */
    7,          /* sizeof(USBRDV_DescrEndpoint) */
    USBDESCR_ENDPOINT,  /* descriptor type = endpoint */
    0x81,       /* IN endpoint number 1 */
    0x03,       /* attrib: Interrupt endpoint */
    8, 0,       /* maximum packet size */
    USBRDV_CFG_INTR_POLL_INTERVAL, /* in ms */
#endif
};

static char USBRDV_DescrString0[] PROGMEM = {   /* language descriptor */
    4,          /* sizeof(USBRDV_DescrString0): length of descriptor in bytes */
    3,          /* descriptor type */
    0x09, 0x04, /* language index (0x0409 = US-English) */
};

#if USBRDV_CFG_VENDOR_NAME_LEN
static int  USBRDV_DescrString1[] PROGMEM = {
    USBRDV_STRING_DESCRIPTOR_HEADER(USBRDV_CFG_VENDOR_NAME_LEN),
    USBRDV_CFG_VENDOR_NAME
};
#endif
#if USBRDV_CFG_DEVICE_NAME_LEN
static int  USBRDV_DescrString2[] PROGMEM = {
    USBRDV_STRING_DESCRIPTOR_HEADER(USBRDV_CFG_DEVICE_NAME_LEN),
    USBRDV_CFG_DEVICE_NAME
};
#endif

/* We don't use prog_int or prog_int16_t for compatibility with various libc
 * versions. Here's an other compatibility hack:
 */
#ifndef PRG_RDB
#define PRG_RDB(addr)   pgm_read_byte(addr)
#endif

typedef union{
    unsigned    word;
    uchar       *ptr;
    uchar       bytes[2];
}converter_t;
/* We use this union to do type conversions. This is better optimized than
 * type casts in gcc 3.4.3 and much better than using bit shifts to build
 * ints from chars. Byte ordering is not a problem on an 8 bit platform.
 */

/* ------------------------------------------------------------------------- */

#if USBRDV_CFG_HAVE_INTRIN_ENDPOINT
static uchar    USBRDV_TxPacketCnt1;
#if USBRDV_CFG_IMPLEMENT_HALT
static uchar    USBRDV_Halted1;         /* not 0 if endpoint 1 is halted */
#endif

void    USBRDV_SetInterrupt(uchar *data, uchar len)
{
uchar       *p, i;

#if USBRDV_CFG_IMPLEMENT_HALT
    if(USBRDV_Halted1)
        return;
#endif
    if(len > 8) /* interrupt transfers are limited to 8 bytes */
        len = 8;
    i = USBPID_DATA1;
    if(USBRDV_TxPacketCnt1 & 1)
        i = USBPID_DATA0;
    if(USBRDV_TxLen1 < 0){      /* packet buffer was empty */
        USBRDV_TxPacketCnt1++;
    }else{
        USBRDV_TxLen1 = -1;     /* avoid sending incomplete interrupt data */
    }
    p = USBRDV_TxBuf1;
    *p++ = i;
    for(i=len;i--;)
        *p++ = *data++;
    USBRDV_Crc16Append(&USBRDV_TxBuf1[1], len);
    USBRDV_TxLen1 = len + 4;    /* len must be given including sync byte */
#if DEBUG_LEVEL > 1
    DBG2(0x21, USBRDV_TxBuf1, USBRDV_TxLen1-1);
#else
//    DBG1(0x21, USBRDV_TxBuf1 + 1, 2);
#endif
}
#endif


static uchar    USBRDV_Read(uchar *data, uchar len)
{
#if USBRDV_CFG_IMPLEMENT_FN_READ
    if(USBRDV_MsgFlags & USBRDV_FLG_USE_DEFAULT_RW){
#endif
        uchar i = len, *r = USBRDV_MsgPtr;
        if(USBRDV_MsgFlags & USBRDV_FLG_MSGPTR_IS_ROM){    /* ROM data */
            while(i--){
                char c = PRG_RDB(r);    /* assign to char size variable to enforce byte ops */
                *data++ = c;
                r++;
            }
        }else{                  /* RAM data */
            while(i--)
                *data++ = *r++;
        }
        USBRDV_MsgPtr = r;
        return len;
#if USBRDV_CFG_IMPLEMENT_FN_READ
    }else{
        if(len != 0)    /* don't bother app with 0 sized reads */
            return USBRDV_FunctionRead(data, len);
        return 0;
    }
#endif
}

/* Don't make this function static to avoid inlining.
 * The entire function would become too large and exceed the range of
 * relative jumps.
 * 2006-02-25: Either gcc 3.4.3 is better than the gcc used when the comment
 * above was written, or other parts of the code have changed. We now get
 * better results with an inlined function. Test condition: PowerSwitch code.
 */
static void USBRDV_ProcessRx(uchar *data, uchar len)
{
USBRDV_Request_t    *rq = (void *)data;
uchar           replyLen = 0, flags = USBRDV_FLG_USE_DEFAULT_RW;