⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ip-forward-mib.txt

📁 snmp based application it is used to get the info of snmp
💻 TXT
📖 第 1 页 / 共 2 页
字号:
IP-FORWARD-MIB DEFINITIONS ::= BEGINIMPORTS    MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Gauge32        FROM SNMPv2-SMI    RowStatus        FROM SNMPv2-TC    ip        FROM RFC1213-MIB    MODULE-COMPLIANCE, OBJECT-GROUP        FROM SNMPv2-CONF;ipForward MODULE-IDENTITY    LAST-UPDATED "9609190000Z"     -- Thu Sep 26 16:34:47 PDT 1996    ORGANIZATION "IETF OSPF Working Group"    CONTACT-INFO     "        Fred Baker      Postal: Cisco Systems              519 Lado Drive              Santa Barbara, California 93111      Phone:  +1 805 681 0115      Email:  fred@cisco.com      "    DESCRIPTION            "The MIB module for the display of CIDR multipath IP Routes."    REVISION      "9609190000Z"    DESCRIPTION            "Revisions made by the OSPF WG."    ::= { ip 24 }ipCidrRouteNumber OBJECT-TYPE    SYNTAX   Gauge32    MAX-ACCESS read-only    STATUS   current    DESCRIPTION       "The number of current ipCidrRouteTable entries       that are not invalid."    ::= { ipForward 3 }--  IP CIDR Route Table--  The IP CIDR Route Table obsoletes and replaces the ipRoute--  Table current in MIB-I and MIB-II and the IP Forwarding Table.--  It adds knowledge of the autonomous system of the next hop,--  multiple next hops, and policy routing, and Classless--  Inter-Domain Routing.ipCidrRouteTable OBJECT-TYPE    SYNTAX   SEQUENCE OF IpCidrRouteEntry    MAX-ACCESS not-accessible    STATUS   current    DESCRIPTION       "This entity's IP Routing table."    REFERENCE       "RFC 1213 Section 6.6, The IP Group"    ::= { ipForward 4 }ipCidrRouteEntry OBJECT-TYPE    SYNTAX   IpCidrRouteEntry    MAX-ACCESS not-accessible    STATUS   current    DESCRIPTION       "A particular route to  a  particular  destina-       tion, under a particular policy."    INDEX {        ipCidrRouteDest,        ipCidrRouteMask,        ipCidrRouteTos,        ipCidrRouteNextHop        }    ::= { ipCidrRouteTable 1 }IpCidrRouteEntry ::=    SEQUENCE {        ipCidrRouteDest            IpAddress,        ipCidrRouteMask            IpAddress,        ipCidrRouteTos             Integer32,        ipCidrRouteNextHop            IpAddress,        ipCidrRouteIfIndex            Integer32,        ipCidrRouteType            INTEGER,        ipCidrRouteProto            INTEGER,        ipCidrRouteAge            Integer32,        ipCidrRouteInfo            OBJECT IDENTIFIER,        ipCidrRouteNextHopAS            Integer32,        ipCidrRouteMetric1            Integer32,        ipCidrRouteMetric2            Integer32,        ipCidrRouteMetric3            Integer32,        ipCidrRouteMetric4            Integer32,        ipCidrRouteMetric5            Integer32,        ipCidrRouteStatus            RowStatus    }ipCidrRouteDest OBJECT-TYPE    SYNTAX   IpAddress    MAX-ACCESS read-only    STATUS   current    DESCRIPTION       "The destination IP address of this route.       This object may not take a Multicast (Class  D)       address value.       Any assignment (implicit or  otherwise)  of  an       instance  of  this  object to a value x must be       rejected if the bitwise logical-AND of  x  with       the  value of the corresponding instance of the       ipCidrRouteMask object is not equal to x."    ::= { ipCidrRouteEntry 1 }ipCidrRouteMask OBJECT-TYPE    SYNTAX   IpAddress    MAX-ACCESS read-only    STATUS   current    DESCRIPTION       "Indicate the mask to be logical-ANDed with the       destination  address  before  being compared to       the value  in  the  ipCidrRouteDest  field.   For       those  systems  that  do  not support arbitrary       subnet masks, an agent constructs the value  of       the  ipCidrRouteMask  by  reference to the IP Ad-       dress Class.       Any assignment (implicit or  otherwise)  of  an       instance  of  this  object to a value x must be       rejected if the bitwise logical-AND of  x  with       the  value of the corresponding instance of the       ipCidrRouteDest object is not equal to ipCidrRoute-       Dest."    ::= { ipCidrRouteEntry 2 }-- The following convention is included for specification-- of TOS Field contents.  At this time, the Host Requirements-- and the Router Requirements documents disagree on the width-- of the TOS field.  This mapping describes the Router-- Requirements mapping, and leaves room to widen the TOS field-- without impact to fielded systems.ipCidrRouteTos OBJECT-TYPE    SYNTAX   Integer32    MAX-ACCESS read-only    STATUS   current    DESCRIPTION       "The policy specifier is the IP TOS Field.  The encoding       of IP TOS is as specified  by  the  following convention.       Zero indicates the default path if no more  specific       policy applies.       +-----+-----+-----+-----+-----+-----+-----+-----+       |                 |                       |     |       |   PRECEDENCE    |    TYPE OF SERVICE    |  0  |       |                 |                       |     |       +-----+-----+-----+-----+-----+-----+-----+-----+                IP TOS                IP TOS           Field     Policy      Field     Policy           Contents    Code      Contents    Code           0 0 0 0  ==>   0      0 0 0 1  ==>   2           0 0 1 0  ==>   4      0 0 1 1  ==>   6           0 1 0 0  ==>   8      0 1 0 1  ==>  10           0 1 1 0  ==>  12      0 1 1 1  ==>  14           1 0 0 0  ==>  16      1 0 0 1  ==>  18           1 0 1 0  ==>  20      1 0 1 1  ==>  22           1 1 0 0  ==>  24      1 1 0 1  ==>  26           1 1 1 0  ==>  28      1 1 1 1  ==>  30"    ::= { ipCidrRouteEntry 3 }ipCidrRouteNextHop OBJECT-TYPE    SYNTAX   IpAddress    MAX-ACCESS read-only    STATUS   current    DESCRIPTION       "On remote routes, the address of the next sys-       tem en route; Otherwise, 0.0.0.0."    ::= { ipCidrRouteEntry 4 }ipCidrRouteIfIndex OBJECT-TYPE    SYNTAX   Integer32    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "The ifIndex value which identifies  the  local       interface  through  which  the next hop of this       route should be reached."    DEFVAL { 0 }    ::= { ipCidrRouteEntry 5 }ipCidrRouteType OBJECT-TYPE    SYNTAX   INTEGER {                other    (1), -- not specified by this MIB                reject   (2), -- route which discards traffic                local    (3), -- local interface                remote   (4)  -- remote destination             }    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "The type of route.  Note that local(3)  refers       to  a route for which the next hop is the final       destination; remote(4) refers to  a  route  for       which  the  next  hop is not the final destina-       tion.       Routes which do not result in traffic forwarding or       rejection should not be displayed even if the       implementation keeps them stored internally.       reject (2) refers to a route which, if matched, discards       the message as unreachable. This is used in some       protocols as a means of correctly aggregating routes."    ::= { ipCidrRouteEntry 6 }ipCidrRouteProto OBJECT-TYPE    SYNTAX   INTEGER {                other     (1),  -- not specified                local     (2),  -- local interface                netmgmt   (3),  -- static route                icmp      (4),  -- result of ICMP Redirect                        -- the following are all dynamic                        -- routing protocols                egp        (5),  -- Exterior Gateway Protocol                ggp        (6),  -- Gateway-Gateway Protocol                hello      (7),  -- FuzzBall HelloSpeak                rip        (8),  -- Berkeley RIP or RIP-II                isIs       (9),  -- Dual IS-IS                esIs       (10), -- ISO 9542                ciscoIgrp  (11), -- Cisco IGRP                bbnSpfIgp  (12), -- BBN SPF IGP                ospf       (13), -- Open Shortest Path First                bgp        (14), -- Border Gateway Protocol                idpr       (15), -- InterDomain Policy Routing                ciscoEigrp (16)  -- Cisco EIGRP             }    MAX-ACCESS read-only    STATUS   current    DESCRIPTION       "The routing mechanism via which this route was       learned.  Inclusion of values for gateway rout-       ing protocols is not  intended  to  imply  that       hosts should support those protocols."    ::= { ipCidrRouteEntry 7 }ipCidrRouteAge OBJECT-TYPE    SYNTAX   Integer32    MAX-ACCESS read-only    STATUS   current    DESCRIPTION       "The number of seconds  since  this  route  was       last  updated  or  otherwise  determined  to be       correct.  Note that no semantics of  `too  old'       can  be implied except through knowledge of the       routing  protocol  by  which  the   route   was       learned."    DEFVAL  { 0 }    ::= { ipCidrRouteEntry 8 }ipCidrRouteInfo OBJECT-TYPE    SYNTAX   OBJECT IDENTIFIER    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "A reference to MIB definitions specific to the       particular  routing protocol which is responsi-       ble for this route, as determined by the  value       specified  in the route's ipCidrRouteProto value.       If this information is not present,  its  value       should be set to the OBJECT IDENTIFIER { 0 0 },       which is a syntactically valid object  identif-       ier, and any implementation conforming to ASN.1       and the Basic Encoding Rules must  be  able  to       generate and recognize this value."    ::= { ipCidrRouteEntry 9 }ipCidrRouteNextHopAS OBJECT-TYPE    SYNTAX   Integer32    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "The Autonomous System Number of the Next  Hop.       The  semantics of this object are determined by       the routing-protocol specified in  the  route's       ipCidrRouteProto  value. When  this object is       unknown or not relevant its value should be set       to zero."    DEFVAL { 0 }    ::= { ipCidrRouteEntry 10 }ipCidrRouteMetric1 OBJECT-TYPE    SYNTAX   Integer32    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "The primary routing  metric  for  this  route.       The  semantics of this metric are determined by       the routing-protocol specified in  the  route's       ipCidrRouteProto  value.   If  this metric is not       used, its value should be set to -1."    DEFVAL { -1 }    ::= { ipCidrRouteEntry 11 }ipCidrRouteMetric2 OBJECT-TYPE    SYNTAX   Integer32    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "An alternate routing metric  for  this  route.       The  semantics of this metric are determined by       the routing-protocol specified in  the  route's       ipCidrRouteProto  value.   If  this metric is not       used, its value should be set to -1."    DEFVAL { -1 }    ::= { ipCidrRouteEntry 12 }ipCidrRouteMetric3 OBJECT-TYPE    SYNTAX   Integer32    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "An alternate routing metric  for  this  route.       The  semantics of this metric are determined by       the routing-protocol specified in  the  route's       ipCidrRouteProto  value.   If  this metric is not       used, its value should be set to -1."    DEFVAL { -1 }    ::= { ipCidrRouteEntry 13 }ipCidrRouteMetric4 OBJECT-TYPE    SYNTAX   Integer32    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "An alternate routing metric  for  this  route.       The  semantics of this metric are determined by       the routing-protocol specified in  the  route's       ipCidrRouteProto  value.   If  this metric is not       used, its value should be set to -1."    DEFVAL { -1 }    ::= { ipCidrRouteEntry 14 }ipCidrRouteMetric5 OBJECT-TYPE    SYNTAX   Integer32    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "An alternate routing metric  for  this  route.       The  semantics of this metric are determined by       the routing-protocol specified in  the  route's       ipCidrRouteProto  value.   If  this metric is not       used, its value should be set to -1."    DEFVAL { -1 }    ::= { ipCidrRouteEntry 15 }ipCidrRouteStatus OBJECT-TYPE    SYNTAX   RowStatus    MAX-ACCESS read-create    STATUS   current    DESCRIPTION       "The row status variable, used according to       row installation and removal conventions."    ::= { ipCidrRouteEntry 16 }-- conformance informationipForwardConformance OBJECT IDENTIFIER ::= { ipForward 5 }ipForwardGroups      OBJECT IDENTIFIER ::= { ipForwardConformance 1 }ipForwardCompliances OBJECT IDENTIFIER ::= { ipForwardConformance 2 }-- compliance statementsipForwardCompliance MODULE-COMPLIANCE   STATUS  current   DESCRIPTION       "The compliance statement for SNMPv2 entities       which implement the ipForward MIB."   MODULE  -- this module   MANDATORY-GROUPS { ipForwardCidrRouteGroup }   ::= { ipForwardCompliances 1 }-- units of conformanceipForwardCidrRouteGroup OBJECT-GROUP

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -