agentx-mib.txt

snmp based application it is used to get the info of snmp

  STATUS      current
  DESCRIPTION
     "A textual description of the session.  This is analogous to
      sysDescr defined in the SNMPv2-MIB in RFC 1907 [19] and is
      taken from the o.descr field of the agentx-Open-PDU.
      This attribute will report a zero-length string value for
      subagents not supporting the notion of a session description.
     "
  ::= { agentxSessionEntry 3 }

 agentxSessionAdminStatus OBJECT-TYPE
  SYNTAX      INTEGER {
                 up(1),
                 down(2)
              }
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
     "The administrative (desired) status of the session.  Setting
      the value to 'down(2)' closes the subagent session (with c.reason
      set to 'reasonByManager').
     "
  ::= { agentxSessionEntry 4 }

 agentxSessionOpenTime OBJECT-TYPE
  SYNTAX      TimeStamp
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
     "The value of sysUpTime when this session was opened and,
      therefore, its value when this entry was added to the table.
     "
  ::= { agentxSessionEntry 5 }

 agentxSessionAgentXVer OBJECT-TYPE
  SYNTAX      INTEGER (1..255)
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
     "The version of the AgentX protocol supported by the
      session.  This must be less than or equal to the value of
      agentxMasterAgentXVer.
     "
  ::= { agentxSessionEntry 6 }

 agentxSessionTimeout OBJECT-TYPE
  SYNTAX     INTEGER (0..255)
  UNITS      "seconds"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "The length of time, in seconds, that a master agent should
      allow to elapse after dispatching a message to this session
      before it regards the subagent as not responding.  This value
      is taken from the o.timeout field of the agentx-Open-PDU.
      This is a session-specific value that may be overridden by
      values associated with the specific registered MIB regions
      (see agentxRegTimeout). A value of zero(0) indicates that
      the master agent's default timeout value should be used

      (see agentxDefaultTimeout).
     "
  ::= { agentxSessionEntry 7 }

 -- The AgentX Registration Group

 agentxRegistrationTableLastChange OBJECT-TYPE
  SYNTAX      TimeStamp
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
     "The value of sysUpTime when the last row creation or deletion
      occurred in the agentxRegistrationTable.
     "
  ::= { agentxRegistration 1 }

 agentxRegistrationTable OBJECT-TYPE
  SYNTAX      SEQUENCE OF AgentxRegistrationEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
     "A table of registered regions.
     "
  ::= { agentxRegistration 2 }

 agentxRegistrationEntry OBJECT-TYPE
  SYNTAX      AgentxRegistrationEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
     "Contains information for a single registered region.  An
      entry is created when a session  successfully registers a
      region and is destroyed for any of three reasons: this region
      is unregistered by the session, the session is closed,
      or the subagent connection is closed.
     "
  INDEX       { agentxConnIndex, agentxSessionIndex, agentxRegIndex }
  ::= { agentxRegistrationTable 1 }

 AgentxRegistrationEntry ::= SEQUENCE {
  agentxRegIndex           Unsigned32,
  agentxRegContext         OCTET STRING,
  agentxRegStart           OBJECT IDENTIFIER,
  agentxRegRangeSubId      Unsigned32,
  agentxRegUpperBound      Unsigned32,
  agentxRegPriority        Unsigned32,
  agentxRegTimeout         INTEGER,
  agentxRegInstance        TruthValue }

 agentxRegIndex OBJECT-TYPE
  SYNTAX      Unsigned32 (1..4294967295)
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
     "agentxRegIndex uniquely identifies a registration entry.
      This value is constant for the lifetime of an entry.
     "
  ::= { agentxRegistrationEntry 1 }

 agentxRegContext OBJECT-TYPE
  SYNTAX      OCTET STRING
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
     "The context in which the session supports the objects in this
      region.  A zero-length context indicates the default context.
     "
  ::= { agentxRegistrationEntry 2 }

 agentxRegStart OBJECT-TYPE
  SYNTAX      OBJECT IDENTIFIER
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
     "The starting OBJECT IDENTIFIER of this registration entry.  The
      session identified by agentxSessionIndex implements objects
      starting at this value (inclusive).  Note that this value could
      identify an object type, an object instance, or a partial object
      instance.
     "
  ::= { agentxRegistrationEntry 3 }

 agentxRegRangeSubId OBJECT-TYPE
  SYNTAX      Unsigned32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
     "agentxRegRangeSubId is used to specify the range.  This is
      taken from r.region_subid in the registration PDU.  If the value
      of this object is zero, no range is specified.  If it is non-zero,
      it identifies the `nth' sub-identifier in r.region for which
      this entry's agentxRegUpperBound value is substituted in the
      OID for purposes of defining the region's upper bound.
     "
  ::= { agentxRegistrationEntry 4 }

 agentxRegUpperBound OBJECT-TYPE
  SYNTAX      Unsigned32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "agentxRegUpperBound represents the upper-bound sub-identifier in
     a registration.  This is taken from the r.upper_bound in the
     registration PDU.  If agentxRegRangeSubid (r.region_subid) is
     zero, this value is also zero and is not used to define an upper
     bound for this registration.
    "
  ::= { agentxRegistrationEntry 5 }

 agentxRegPriority OBJECT-TYPE
  SYNTAX      Unsigned32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
     "The registration priority.  Lower values have higher priority.
      This value is taken from r.priority in the register PDU.
      Sessions should use the value of 127 for r.priority if a
      default value is desired.
     "
  ::= { agentxRegistrationEntry 6 }

 agentxRegTimeout OBJECT-TYPE
  SYNTAX      INTEGER (0..255)
  UNITS       "seconds"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
     "The timeout value, in seconds, for responses to
      requests associated with this registered MIB region.
      A value of zero(0) indicates the default value (indicated
      by by agentxSessionTimeout or agentxDefaultTimeout) is to
      be used.  This value is taken from the r.timeout field of
      the agentx-Register-PDU.
     "
  ::= { agentxRegistrationEntry 7 }

 agentxRegInstance OBJECT-TYPE
  SYNTAX      TruthValue
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
     "The value of agentxRegInstance is `true' for
      registrations for which the INSTANCE_REGISTRATION
      was set, and is `false' for all other registrations.
     "
  ::= { agentxRegistrationEntry 8 }

 -- Conformance Statements for AgentX

 agentxConformance     OBJECT IDENTIFIER ::= { agentxMIB 2 }
 agentxMIBGroups       OBJECT IDENTIFIER ::= { agentxConformance 1 }
 agentxMIBCompliances  OBJECT IDENTIFIER ::= { agentxConformance 2 }

 -- Compliance Statements for AgentX

 agentxMIBCompliance MODULE-COMPLIANCE
  STATUS      current
  DESCRIPTION
     "The compliance statement for SNMP entities that implement the
      AgentX protocol.  Note that a compliant agent can implement all
      objects in this MIB module as read-only.
     "
  MODULE -- this module
     MANDATORY-GROUPS  { agentxMIBGroup }

     OBJECT agentxSessionAdminStatus
        MIN-ACCESS read-only
        DESCRIPTION
           "Write access is not required.
           "
  ::= { agentxMIBCompliances 1 }

 agentxMIBGroup OBJECT-GROUP
  OBJECTS {
     agentxDefaultTimeout,
     agentxMasterAgentXVer,
     agentxConnTableLastChange,
     agentxConnOpenTime,
     agentxConnTransportDomain,
     agentxConnTransportAddress,
     agentxSessionTableLastChange,
     agentxSessionTimeout,
     agentxSessionObjectID,
     agentxSessionDescr,
     agentxSessionAdminStatus,
     agentxSessionOpenTime,
     agentxSessionAgentXVer,
     agentxRegistrationTableLastChange,
     agentxRegContext,
     agentxRegStart,
     agentxRegRangeSubId,
     agentxRegUpperBound,
     agentxRegPriority,
     agentxRegTimeout,
     agentxRegInstance
    }
  STATUS      current
  DESCRIPTION
     "All accessible objects in the AgentX MIB.
     "
  ::= { agentxMIBGroups 1 }

 END