⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 rfc1213-mib.txt

📁 snmp based application it is used to get the info of snmp
💻 TXT
📖 第 1 页 / 共 5 页
字号:
ifInDiscards OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of inbound packets which were chosen            to be discarded even though no errors had been            detected to prevent their being deliverable to a            higher-layer protocol.  One possible reason for            discarding such a packet could be to free up            buffer space."    ::= { ifEntry 13 }ifInErrors OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of inbound packets that contained            errors preventing them from being deliverable to a            higher-layer protocol."    ::= { ifEntry 14 }ifInUnknownProtos OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of packets received via the interface            which were discarded because of an unknown or            unsupported protocol."    ::= { ifEntry 15 }ifOutOctets OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The total number of octets transmitted out of the            interface, including framing characters."    ::= { ifEntry 16 }ifOutUcastPkts OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The total number of packets that higher-level            protocols requested be transmitted to a            subnetwork-unicast address, including those that            were discarded or not sent."    ::= { ifEntry 17 }ifOutNUcastPkts OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The total number of packets that higher-level            protocols requested be transmitted to a non-            unicast (i.e., a subnetwork-broadcast or            subnetwork-multicast) address, including those            that were discarded or not sent."    ::= { ifEntry 18 }ifOutDiscards OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of outbound packets which were chosen            to be discarded even though no errors had been            detected to prevent their being transmitted.  One            possible reason for discarding such a packet could            be to free up buffer space."    ::= { ifEntry 19 }ifOutErrors OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of outbound packets that could not be            transmitted because of errors."    ::= { ifEntry 20 }ifOutQLen OBJECT-TYPE    SYNTAX  Gauge    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The length of the output packet queue (in            packets)."    ::= { ifEntry 21 }ifSpecific OBJECT-TYPE    SYNTAX  OBJECT IDENTIFIER    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "A reference to MIB definitions specific to the            particular media being used to realize the            interface.  For example, if the interface is            realized by an ethernet, then the value of this            object refers to a document defining objects            specific to ethernet.  If this information is not            present, its value should be set to the OBJECT            IDENTIFIER { 0 0 }, which is a syntatically valid            object identifier, and any conformant            implementation of ASN.1 and BER must be able to            generate and recognize this value."    ::= { ifEntry 22 }-- the Address Translation group-- Implementation of the Address Translation group is-- mandatory for all systems.  Note however that this group-- is deprecated by MIB-II. That is, it is being included-- solely for compatibility with MIB-I nodes, and will most-- likely be excluded from MIB-III nodes.  From MIB-II and-- onwards, each network protocol group contains its own-- address translation tables.-- The Address Translation group contains one table which is-- the union across all interfaces of the translation tables-- for converting a NetworkAddress (e.g., an IP address) into-- a subnetwork-specific address.  For lack of a better term,-- this document refers to such a subnetwork-specific address-- as a `physical' address.-- Examples of such translation tables are: for broadcast-- media where ARP is in use, the translation table is-- equivalent to the ARP cache; or, on an X.25 network where-- non-algorithmic translation to X.121 addresses is-- required, the translation table contains the-- NetworkAddress to X.121 address equivalences.atTable OBJECT-TYPE    SYNTAX  SEQUENCE OF AtEntry    ACCESS  not-accessible    STATUS  deprecated    DESCRIPTION            "The Address Translation tables contain the            NetworkAddress to `physical' address equivalences.            Some interfaces do not use translation tables for            determining address equivalences (e.g., DDN-X.25            has an algorithmic method); if all interfaces are            of this type, then the Address Translation table            is empty, i.e., has zero entries."    ::= { at 1 }atEntry OBJECT-TYPE    SYNTAX  AtEntry    ACCESS  not-accessible    STATUS  deprecated    DESCRIPTION            "Each entry contains one NetworkAddress to            `physical' address equivalence."    INDEX   { atIfIndex,              atNetAddress }    ::= { atTable 1 }AtEntry ::=    SEQUENCE {        atIfIndex            INTEGER,        atPhysAddress            PhysAddress,        atNetAddress            NetworkAddress    }atIfIndex OBJECT-TYPE    SYNTAX  INTEGER    ACCESS  read-write    STATUS  deprecated    DESCRIPTION            "The interface on which this entry's equivalence            is effective.  The interface identified by a            particular value of this index is the same            interface as identified by the same value of            ifIndex."    ::= { atEntry 1 }atPhysAddress OBJECT-TYPE    SYNTAX  PhysAddress    ACCESS  read-write    STATUS  deprecated    DESCRIPTION            "The media-dependent `physical' address.            Setting this object to a null string (one of zero            length) has the effect of invaliding the            corresponding entry in the atTable object.  That            is, it effectively dissasociates the interface            identified with said entry from the mapping            identified with said entry.  It is an            implementation-specific matter as to whether the            agent removes an invalidated entry from the table.            Accordingly, management stations must be prepared            to receive tabular information from agents that            corresponds to entries not currently in use.            Proper interpretation of such entries requires            examination of the relevant atPhysAddress object."    ::= { atEntry 2 }atNetAddress OBJECT-TYPE    SYNTAX  NetworkAddress    ACCESS  read-write    STATUS  deprecated    DESCRIPTION            "The NetworkAddress (e.g., the IP address)            corresponding to the media-dependent `physical'            address."    ::= { atEntry 3 }-- the IP group-- Implementation of the IP group is mandatory for all-- systems.ipForwarding OBJECT-TYPE    SYNTAX  INTEGER {                forwarding(1),    -- acting as a gateway                not-forwarding(2) -- NOT acting as a gateway            }    ACCESS  read-write    STATUS  mandatory    DESCRIPTION            "The indication of whether this entity is acting            as an IP gateway in respect to the forwarding of            datagrams received by, but not addressed to, this            entity.  IP gateways forward datagrams.  IP hosts            do not (except those source-routed via the host).            Note that for some managed nodes, this object may            take on only a subset of the values possible.            Accordingly, it is appropriate for an agent to            return a `badValue' response if a management            station attempts to change this object to an            inappropriate value."    ::= { ip 1 }ipDefaultTTL OBJECT-TYPE    SYNTAX  INTEGER    ACCESS  read-write    STATUS  mandatory    DESCRIPTION            "The default value inserted into the Time-To-Live            field of the IP header of datagrams originated at            this entity, whenever a TTL value is not supplied            by the transport layer protocol."    ::= { ip 2 }ipInReceives OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The total number of input datagrams received from            interfaces, including those received in error."    ::= { ip 3 }ipInHdrErrors OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of input datagrams discarded due to            errors in their IP headers, including bad            checksums, version number mismatch, other format            errors, time-to-live exceeded, errors discovered            in processing their IP options, etc."    ::= { ip 4 }ipInAddrErrors OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of input datagrams discarded because            the IP address in their IP header's destination            field was not a valid address to be received at            this entity.  This count includes invalid            addresses (e.g., 0.0.0.0) and addresses of            unsupported Classes (e.g., Class E).  For entities            which are not IP Gateways and therefore do not            forward datagrams, this counter includes datagrams            discarded because the destination address was not            a local address."    ::= { ip 5 }ipForwDatagrams OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of input datagrams for which this            entity was not their final IP destination, as a            result of which an attempt was made to find a            route to forward them to that final destination.            In entities which do not act as IP Gateways, this            counter will include only those packets which were            Source-Routed via this entity, and the Source-            Route option processing was successful."    ::= { ip 6 }ipInUnknownProtos OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of locally-addressed datagrams            received successfully but discarded because of an            unknown or unsupported protocol."    ::= { ip 7 }ipInDiscards OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of input IP datagrams for which no            problems were encountered to prevent their            continued processing, but which were discarded            (e.g., for lack of buffer space).  Note that this            counter does not include any datagrams discarded            while awaiting re-assembly."    ::= { ip 8 }ipInDelivers OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The total number of input datagrams successfully            delivered to IP user-protocols (including ICMP)."    ::= { ip 9 }ipOutRequests OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The total number of IP datagrams which local IP            user-protocols (including ICMP) supplied to IP in            requests for transmission.  Note that this counter            does not include any datagrams counted in            ipForwDatagrams."    ::= { ip 10 }ipOutDiscards OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of output IP datagrams for which no            problem was encountered to prevent their            transmission to their destination, but which were            discarded (e.g., for lack of buffer space).  Note            that this counter would include datagrams counted            in ipForwDatagrams if any such packets met this            (discretionary) discard criterion."    ::= { ip 11 }ipOutNoRoutes OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of IP datagrams discarded because no            route could be found to transmit them to their            destination.  Note that this counter includes any            packets counted in ipForwDatagrams which meet this            `no-route' criterion.  Note that this includes any            datagarms which a host cannot route because all of            its default gateways are down."    ::= { ip 12 }ipReasmTimeout OBJECT-TYPE    SYNTAX  INTEGER    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The maximum number of seconds which received            fragments are held while they are awaiting            reassembly at this entity."    ::= { ip 13 }ipReasmReqds OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of IP fragments received which needed            to be reassembled at this entity."    ::= { ip 14 }ipReasmOKs OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of IP datagrams successfully re-            assembled."    ::= { ip 15 }ipReasmFails OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of failures detected by the IP re-            assembly algorithm (for whatever reason: timed            out, errors, etc).  Note that this is not            necessarily a count of discarded IP fragments            since some algorithms (notably the algorithm in            RFC 815) can lose track of the number of fragments            by combining them as they are received."    ::= { ip 16 }ipFragOKs OBJECT-TYPE    SYNTAX  Counter    ACCESS  read-only    STATUS  mandatory    DESCRIPTION            "The number of IP datagrams that have been            successfully fragmented at this entity."

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -