s1.m

Gives all the matlab codes for dynamic simulation of electric machinery by Chee-Mun Ong

set_param([sys,'/','tmodel/Rotor'],'Location',[217,296,1042,512])

add_block('built-in/Outport',[sys,'/','tmodel/Rotor/Tem'])
set_param([sys,'/','tmodel/Rotor/Tem'],...
		'Port','3',...
		'position',[420,137,445,163])

add_block('built-in/Mux',[sys,'/','tmodel/Rotor/Mux'])
set_param([sys,'/','tmodel/Rotor/Mux'],...
		'position',[80,15,105,175])

add_block('built-in/Inport',[sys,'/','tmodel/Rotor/Eqp'])
set_param([sys,'/','tmodel/Rotor/Eqp'],...
		'position',[30,25,50,45])

add_block('built-in/Inport',[sys,'/','tmodel/Rotor/Edp'])
set_param([sys,'/','tmodel/Rotor/Edp'],...
		'Port','2',...
		'position',[30,64,50,86])

add_block('built-in/Inport',[sys,'/','tmodel/Rotor/iq'])
set_param([sys,'/','tmodel/Rotor/iq'],...
		'Port','3',...
		'position',[30,105,50,125])

add_block('built-in/Inport',[sys,'/','tmodel/Rotor/id'])
set_param([sys,'/','tmodel/Rotor/id'],...
		'Port','4',...
		'position',[30,144,50,166])

add_block('built-in/Fcn',[sys,'/','tmodel/Rotor/Fcn'])
set_param([sys,'/','tmodel/Rotor/Fcn'],...
		'Expr','-(u[1]*u[3]+u[2]*u[4]+u[3]*u[4]*(xq-xpd))',...
		'position',[125,80,350,110])

add_block('built-in/Inport',[sys,'/','tmodel/Rotor/T_mech'])
set_param([sys,'/','tmodel/Rotor/T_mech'],...
		'Port','5',...
		'position',[275,27,300,53])

add_block('built-in/Sum',[sys,'/','tmodel/Rotor/Tacc'])
set_param([sys,'/','tmodel/Rotor/Tacc'],...
		'inputs','++-',...
		'position',[395,28,415,92])

add_block('built-in/Gain',[sys,'/','tmodel/Rotor/gain2'])
set_param([sys,'/','tmodel/Rotor/gain2'],...
		'Gain','1/(2*H)',...
		'position',[430,39,495,81])

add_block('built-in/Integrator',[sys,'/','tmodel/Rotor/slip'])
set_param([sys,'/','tmodel/Rotor/slip'],...
		'position',[520,42,560,78])

add_block('built-in/Gain',[sys,'/','tmodel/Rotor/Damp'])
set_param([sys,'/','tmodel/Rotor/Damp'],...
		'orientation',2,...
		'Gain','Domega',...
		'position',[450,96,525,134])

add_block('built-in/Constant',[sys,'/','tmodel/Rotor/gain3'])
set_param([sys,'/','tmodel/Rotor/gain3'],...
		'Value','we/wb',...
		'position',[515,145,565,175])

add_block('built-in/Sum',[sys,'/','tmodel/Rotor/wr//wb'])
set_param([sys,'/','tmodel/Rotor/wr//wb'],...
		'position',[600,130,615,170])

add_block('built-in/Gain',[sys,'/','tmodel/Rotor/gain4'])
set_param([sys,'/','tmodel/Rotor/gain4'],...
		'Gain','wb',...
		'position',[605,38,655,82])

add_block('built-in/Integrator',[sys,'/','tmodel/Rotor/delta'])
set_param([sys,'/','tmodel/Rotor/delta'],...
		'Initial','delio',...
		'position',[675,42,710,78])

add_block('built-in/Outport',[sys,'/','tmodel/Rotor/out_delta'])
set_param([sys,'/','tmodel/Rotor/out_delta'],...
		'position',[735,50,755,70])

add_block('built-in/Outport',[sys,'/','tmodel/Rotor/out_puslip'])
set_param([sys,'/','tmodel/Rotor/out_puslip'],...
		'Port','2',...
		'position',[720,104,740,126])
add_line([sys,'/','tmodel/Rotor'],[565,60;575,60;575,140;595,140])
add_line([sys,'/','tmodel/Rotor'],[445,115;380,115;390,80])
add_line([sys,'/','tmodel/Rotor'],[305,40;390,40])
add_line([sys,'/','tmodel/Rotor'],[715,60;730,60])
add_line([sys,'/','tmodel/Rotor'],[420,60;425,60])
add_line([sys,'/','tmodel/Rotor'],[570,160;595,160])
add_line([sys,'/','tmodel/Rotor'],[500,60;515,60])
add_line([sys,'/','tmodel/Rotor'],[660,60;670,60])
add_line([sys,'/','tmodel/Rotor'],[565,60;600,60])
add_line([sys,'/','tmodel/Rotor'],[565,60;575,60;575,115;530,115])
add_line([sys,'/','tmodel/Rotor'],[565,60;575,60;575,115;715,115])
add_line([sys,'/','tmodel/Rotor'],[110,95;120,95])
add_line([sys,'/','tmodel/Rotor'],[355,95;365,95;365,60;390,60])
add_line([sys,'/','tmodel/Rotor'],[355,95;365,95;365,150;415,150])
add_line([sys,'/','tmodel/Rotor'],[55,35;75,35])
add_line([sys,'/','tmodel/Rotor'],[55,115;75,115])
add_line([sys,'/','tmodel/Rotor'],[55,155;75,155])
add_line([sys,'/','tmodel/Rotor'],[55,75;75,75])


%     Finished composite block 'tmodel/Rotor'.

set_param([sys,'/','tmodel/Rotor'],...
		'Font Number',3,...
		'position',[535,226,580,344])

add_block('built-in/Inport',[sys,'/','tmodel/in_Tmech'])
set_param([sys,'/','tmodel/in_Tmech'],...
		'Port','4',...
		'position',[490,325,510,345])

add_block('built-in/Outport',[sys,'/','tmodel/out_delta'])
set_param([sys,'/','tmodel/out_delta'],...
		'Port','5',...
		'position',[740,235,760,255])

add_block('built-in/Note',[sys,'/','tmodel/delta'])
set_param([sys,'/','tmodel/delta'],...
		'position',[610,225,615,230])

add_block('built-in/Outport',[sys,'/','tmodel/out_puslip'])
set_param([sys,'/','tmodel/out_puslip'],...
		'Port','6',...
		'position',[670,275,690,295])

add_block('built-in/Outport',[sys,'/','tmodel/out_Tem'])
set_param([sys,'/','tmodel/out_Tem'],...
		'Port','7',...
		'position',[740,315,760,335])

add_block('built-in/Note',[sys,'/','tmodel/iq'])
set_param([sys,'/','tmodel/iq'],...
		'position',[360,260,365,265])

add_block('built-in/Note',[sys,'/','tmodel/id'])
set_param([sys,'/','tmodel/id'],...
		'position',[360,290,365,295])

add_block('built-in/Note',[sys,'/','tmodel/|Vt|'])
set_param([sys,'/','tmodel/|Vt|'],...
		'position',[545,115,550,120])
add_line([sys,'/','tmodel'],[275,180;280,180;280,220;300,220])
add_line([sys,'/','tmodel'],[585,245;600,245;600,370;150,370;150,315;165,315])
add_line([sys,'/','tmodel'],[275,180;395,180;395,235;530,235])
add_line([sys,'/','tmodel'],[275,180;280,180;280,145;105,145;105,160;125,160])
add_line([sys,'/','tmodel'],[235,180;235,180])
add_line([sys,'/','tmodel'],[155,180;165,180])
add_line([sys,'/','tmodel'],[190,105;95,105;95,200;125,200])
add_line([sys,'/','tmodel'],[530,160;665,160])
add_line([sys,'/','tmodel'],[530,185;735,185])
add_line([sys,'/','tmodel'],[530,210;665,210])
add_line([sys,'/','tmodel'],[585,245;735,245])
add_line([sys,'/','tmodel'],[585,285;665,285])
add_line([sys,'/','tmodel'],[85,240;120,240;120,275;165,275])
add_line([sys,'/','tmodel'],[85,295;165,295])
add_line([sys,'/','tmodel'],[350,220;360,220;360,135;480,135])
add_line([sys,'/','tmodel'],[350,250;380,250;380,185;480,185])
add_line([sys,'/','tmodel'],[350,280;410,280;410,160;480,160])
add_line([sys,'/','tmodel'],[350,310;445,310;445,210;480,210])
add_line([sys,'/','tmodel'],[350,310;445,310;445,105;265,105])
add_line([sys,'/','tmodel'],[85,180;125,180])
add_line([sys,'/','tmodel'],[585,325;735,325])
add_line([sys,'/','tmodel'],[235,425;240,425])
add_line([sys,'/','tmodel'],[145,425;165,425])
add_line([sys,'/','tmodel'],[280,425;285,425;285,460;100,460;100,435;115,435])
add_line([sys,'/','tmodel'],[350,280;410,280;410,490;265,490])
add_line([sys,'/','tmodel'],[190,490;90,490;90,410;115,410])
add_line([sys,'/','tmodel'],[280,425;285,425;285,250;300,250])
add_line([sys,'/','tmodel'],[215,280;300,280])
add_line([sys,'/','tmodel'],[215,310;300,310])
add_line([sys,'/','tmodel'],[515,335;530,335])
add_line([sys,'/','tmodel'],[350,310;530,310])
add_line([sys,'/','tmodel'],[350,280;410,280;410,285;530,285])
add_line([sys,'/','tmodel'],[280,425;470,425;470,260;530,260])
add_line([sys,'/','tmodel'],[530,135;735,135])


%     Finished composite block 'tmodel'.

set_param([sys,'/','tmodel'],...
		'position',[195,108,275,282])

add_block('built-in/Mux',[sys,'/','Mux'])
set_param([sys,'/','Mux'],...
		'orientation',3,...
		'inputs','3',...
		'position',[303,70,447,95])

add_block('built-in/Scope',[sys,'/','Scope'])
set_param([sys,'/','Scope'],...
		'orientation',2,...
		'Vgain','1.200000',...
		'Hgain','10.000000',...
		'Vmax','2.400000',...
		'Hmax','20.000000',...
		'Window',[25,391,385,584])
open_system([sys,'/','Scope'])
set_param([sys,'/','Scope'],...
		'position',[225,36,245,64])

add_block('built-in/To Workspace',[sys,'/','To Workspace'])
set_param([sys,'/','To Workspace'],...
		'mat-name','y1',...
		'buffer','5000',...
		'position',[495,42,545,58])

add_block('built-in/To Workspace',[sys,'/','To Workspace1'])
set_param([sys,'/','To Workspace1'],...
		'mat-name','y2',...
		'buffer','5000',...
		'position',[470,342,520,358])

add_block('built-in/Scope',[sys,'/','Scope1'])
set_param([sys,'/','Scope1'],...
		'orientation',2,...
		'Vgain','2.000000',...
		'Hgain','10.000000',...
		'Vmax','4.000000',...
		'Hmax','20.000000',...
		'Window',[375,392,739,575])
open_system([sys,'/','Scope1'])
set_param([sys,'/','Scope1'],...
		'position',[200,336,220,364])

add_block('built-in/Mux',[sys,'/','Mux1'])
set_param([sys,'/','Mux1'],...
		'orientation',1,...
		'inputs','3',...
		'position',[273,310,417,335])

add_block('built-in/Outport',[sys,'/','|Igen|'])
set_param([sys,'/','|Igen|'],...
		'Port','2',...
		'position',[520,135,540,155])

add_block('built-in/Outport',[sys,'/','Qgen'])
set_param([sys,'/','Qgen'],...
		'Port','4',...
		'position',[520,185,540,205])

add_block('built-in/Outport',[sys,'/','Tem'])
set_param([sys,'/','Tem'],...
		'Port','7',...
		'position',[465,260,485,280])

add_block('built-in/Outport',[sys,'/','puslip'])
set_param([sys,'/','puslip'],...
		'Port','6',...
		'position',[520,235,540,255])

add_block('built-in/Outport',[sys,'/','delta'])
set_param([sys,'/','delta'],...
		'Port','5',...
		'position',[465,210,485,230])

add_block('built-in/Outport',[sys,'/','Pgen'])
set_param([sys,'/','Pgen'],...
		'Port','3',...
		'position',[465,160,485,180])

add_block('built-in/Outport',[sys,'/','|Vt|'])
set_param([sys,'/','|Vt|'],...
		'position',[465,110,485,130])


%     Subsystem  'Tmech'.

new_system([sys,'/','Tmech'])
set_param([sys,'/','Tmech'],'Location',[5,40,315,196])

add_block('built-in/Outport',[sys,'/','Tmech/out_1'])
set_param([sys,'/','Tmech/out_1'],...
		'position',[285,60,305,80])

add_block('built-in/Look Up Table',[sys,'/','Tmech/Look-Up Table'])
set_param([sys,'/','Tmech/Look-Up Table'],...
		'Input_Values','t',...
		'Output_Values','y',...
		'position',[210,58,250,82])

add_block('built-in/Fcn',[sys,'/','Tmech/Fcn1'])
set_param([sys,'/','Tmech/Fcn1'],...
		'Expr','rem(u[1],period)',...
		'position',[110,60,150,80])

add_block('built-in/Clock',[sys,'/','Tmech/Clock'])
set_param([sys,'/','Tmech/Clock'],...
		'position',[45,60,65,80])
add_line([sys,'/','Tmech'],[255,70;280,70])
add_line([sys,'/','Tmech'],[70,70;105,70])
add_line([sys,'/','Tmech'],[155,70;205,70])
set_param([sys,'/','Tmech'],...
		'Mask Display','plot([t,t+period,t+2*period],[y,y,y])',...
		'Mask Type','Repeating table',...
		'Mask Dialogue','Repeating table.\nEnter values of time and output for first cycle.|Time values:|Output values:')
set_param([sys,'/','Tmech'],...
		'Mask Translate','period = max(@1); t = @1; y = @2;',...
		'Mask Help','Repeats cycle given in table. Time values should be monotonically increasing.')
set_param([sys,'/','Tmech'],...
		'Mask Entries','[0 2 2 7  7 12 12 17]\/[0.8 0.8 0.9 0.9 0.7 0.7 0.8 0.8 ]\/')


%     Finished composite block 'Tmech'.

set_param([sys,'/','Tmech'],...
		'position',[130,251,165,279])

add_block('built-in/Constant',[sys,'/','vde'])
set_param([sys,'/','vde'],...
		'Value','0',...
		'position',[140,210,160,230])

add_block('built-in/Constant',[sys,'/','vqe'])
set_param([sys,'/','vqe'],...
		'position',[140,165,160,185])

add_block('built-in/Constant',[sys,'/','Efo'])
set_param([sys,'/','Efo'],...
		'Value','Efo',...
		'position',[130,121,160,139])


%     Subsystem  'm1'.

new_system([sys,'/','m1'])
set_param([sys,'/','m1'],'Location',[65,4063434,148,4063542])

add_block('built-in/Note',[sys,'/',['m1/This masked block makes use of',13,'m1.m to initialize s1.m.']])
set_param([sys,'/',['m1/This masked block makes use of',13,'m1.m to initialize s1.m.']],...
		'position',[50,60,55,65])
set_param([sys,'/','m1'],...
		'Mask Display','Initialize\nand plot',...
		'Mask Type','Masked block of m1.m',...
		'Mask Dialogue','eval(''m1'')',...
		'Mask Help','Uses m1.m to initalize and plot')


%     Finished composite block 'm1'.

set_param([sys,'/','m1'],...
		'Drop Shadow',4,...
		'position',[103,53,177,84])
add_line(sys,[165,130;190,130])
add_line(sys,[165,175;190,175])
add_line(sys,[165,220;190,220])
add_line(sys,[170,265;190,265])
add_line(sys,[375,65;375,50;250,50])
add_line(sys,[280,270;460,270])
add_line(sys,[280,245;515,245])
add_line(sys,[280,220;460,220])
add_line(sys,[280,195;515,195])
add_line(sys,[280,170;460,170])
add_line(sys,[280,145;515,145])
add_line(sys,[280,120;460,120])
add_line(sys,[375,65;375,50;490,50])
add_line(sys,[345,340;345,350;225,350])
add_line(sys,[345,340;345,350;465,350])
add_line(sys,[280,170;295,170;295,305])
add_line(sys,[280,195;345,195;345,305])
add_line(sys,[280,120;325,120;325,100])
add_line(sys,[280,145;375,145;375,100])
add_line(sys,[280,270;425,270;425,100])
add_line(sys,[280,220;395,220;395,305])

drawnow

% Return any arguments.
if (nargin | nargout)
	% Must use feval here to access system in memory
	if (nargin > 3)
		if (flag == 0)
			eval(['[ret,x0,str,ts,xts]=',sys,'(t,x,u,flag);'])
		else
			eval(['ret =', sys,'(t,x,u,flag);'])
		end
	else
		[ret,x0,str,ts,xts] = feval(sys);
	end
else
	drawnow % Flash up the model and execute load callback
end