s4eig.m

Gives all the matlab codes for dynamic simulation of electric machinery by Chee-Mun Ong

		'position',[390,136,415,164])

add_block('built-in/Note',[sys,'/','Daxis/ids'])
set_param([sys,'/','Daxis/ids'],...
		'position',[650,120,655,125])

add_block('built-in/Mux',[sys,'/','Daxis/Mux4'])
set_param([sys,'/','Daxis/Mux4'],...
		'inputs','2',...
		'position',[500,114,520,161])

add_block('built-in/Fcn',[sys,'/','Daxis/Fcn4'])
set_param([sys,'/','Daxis/Fcn4'],...
		'Expr','(u[1]-u[2])/xls',...
		'position',[545,126,635,154])

add_block('built-in/Outport',[sys,'/','Daxis/out_ids'])
set_param([sys,'/','Daxis/out_ids'],...
		'Port','2',...
		'position',[785,130,805,150])

add_block('built-in/Outport',[sys,'/','Daxis/out_psids'])
set_param([sys,'/','Daxis/out_psids'],...
		'position',[785,65,805,85])

add_block('built-in/Fcn',[sys,'/','Daxis/Fcn'])
set_param([sys,'/','Daxis/Fcn'],...
		'Expr','wb*(u[2]+(we/wb)*u[4]+(rs/xls)*(u[1]-u[3]))',...
		'position',[130,135,370,165])

add_block('built-in/Mux',[sys,'/','Daxis/Mux'])
set_param([sys,'/','Daxis/Mux'],...
		'position',[95,108,115,192])

add_block('built-in/Inport',[sys,'/','Daxis/in_vds'])
set_param([sys,'/','Daxis/in_vds'],...
		'position',[40,130,60,150])

add_block('built-in/Inport',[sys,'/','Daxis/in_psiqs'])
set_param([sys,'/','Daxis/in_psiqs'],...
		'Port','3',...
		'position',[35,170,55,190])

add_block('built-in/Inport',[sys,'/',['Daxis/in_(wr//wb)*psiqr''']])
set_param([sys,'/',['Daxis/in_(wr//wb)*psiqr''']],...
		'Port','2',...
		'position',[40,290,60,310])

add_block('built-in/Mux',[sys,'/','Daxis/Mux1'])
set_param([sys,'/','Daxis/Mux1'],...
		'inputs','3',...
		'position',[100,262,120,338])

add_block('built-in/Fcn',[sys,'/','Daxis/Fcn2'])
set_param([sys,'/','Daxis/Fcn2'],...
		'Expr','wb*(-u[2] +(rpr/xplr)*(u[3]-u[1]))',...
		'position',[165,284,345,316])

add_block('built-in/Integrator',[sys,'/',['Daxis/psidr''_']])
set_param([sys,'/',['Daxis/psidr''_']],...
		'Initial','Psipdro',...
		'position',[390,285,420,315])
add_line([sys,'/','Daxis'],[690,225;745,225;745,365;460,365;460,325;495,325])
add_line([sys,'/','Daxis'],[425,300;495,300])
add_line([sys,'/','Daxis'],[525,315;535,315])
add_line([sys,'/','Daxis'],[425,300;465,300;465,240;490,240])
add_line([sys,'/','Daxis'],[420,150;455,150;455,210;80,210;90,160])
add_line([sys,'/','Daxis'],[425,300;465,300;465,240;75,240;75,275;95,275])
add_line([sys,'/','Daxis'],[125,300;160,300])
add_line([sys,'/','Daxis'],[690,225;745,225;745,90;75,90;75,120;90,120])
add_line([sys,'/','Daxis'],[690,225;745,225;745,365;75,365;75,325;95,325])
add_line([sys,'/','Daxis'],[690,225;745,225;745,180;475,180;475,150;495,150])
add_line([sys,'/','Daxis'],[420,150;455,150;455,125;495,125])
add_line([sys,'/','Daxis'],[525,140;540,140])
add_line([sys,'/','Daxis'],[520,225;530,225])
add_line([sys,'/','Daxis'],[420,150;455,150;455,210;490,210])
add_line([sys,'/','Daxis'],[350,300;385,300])
add_line([sys,'/','Daxis'],[375,150;385,150])
add_line([sys,'/','Daxis'],[120,150;125,150])
add_line([sys,'/','Daxis'],[640,140;780,140])
add_line([sys,'/','Daxis'],[420,150;455,150;455,75;780,75])
add_line([sys,'/','Daxis'],[65,140;90,140])
add_line([sys,'/','Daxis'],[65,300;95,300])
add_line([sys,'/','Daxis'],[640,315;780,315])
add_line([sys,'/','Daxis'],[425,300;465,300;465,270;780,270])
add_line([sys,'/','Daxis'],[60,180;90,180])


%     Finished composite block 'Daxis'.

set_param([sys,'/','Daxis'],...
		'position',[220,260,255,315])

add_block('built-in/Note',[sys,'/','psiqse'])
set_param([sys,'/','psiqse'],...
		'position',[290,62,295,67])

add_block('built-in/Note',[sys,'/','iqse_'])
set_param([sys,'/','iqse_'],...
		'position',[285,82,290,87])

add_block('built-in/Note',[sys,'/','psidre'])
set_param([sys,'/','psidre'],...
		'position',[284,292,289,297])

add_block('built-in/Product',[sys,'/','Product'])
set_param([sys,'/','Product'],...
		'orientation',2,...
		'position',[220,154,240,176])

add_block('built-in/Product',[sys,'/','Product1'])
set_param([sys,'/','Product1'],...
		'orientation',2,...
		'position',[220,203,240,227])


%     Subsystem  'Rotor'.

new_system([sys,'/','Rotor'])
set_param([sys,'/','Rotor'],'Location',[219,388,854,634])

add_block('built-in/Note',[sys,'/','Rotor/Tdamp'])
set_param([sys,'/','Rotor/Tdamp'],...
		'position',[415,180,420,185])

add_block('built-in/Outport',[sys,'/','Rotor/out_wr//wb'])
set_param([sys,'/','Rotor/out_wr//wb'],...
		'Port','2',...
		'position',[550,123,570,147])

add_block('built-in/Integrator',[sys,'/','Rotor/1//s'])
set_param([sys,'/','Rotor/1//s'],...
		'Initial','wrbywbo',...
		'position',[480,118,515,152])

add_block('built-in/Gain',[sys,'/','Rotor/1//2H'])
set_param([sys,'/','Rotor/1//2H'],...
		'Gain','1/(2*H)',...
		'position',[395,109,460,161])

add_block('built-in/Sum',[sys,'/','Rotor/Taccl'])
set_param([sys,'/','Rotor/Taccl'],...
		'inputs','++-',...
		'position',[355,95,375,175])

add_block('built-in/Gain',[sys,'/',['Rotor/Damping',13,'coefficient']])
set_param([sys,'/',['Rotor/Damping',13,'coefficient']],...
		'orientation',2,...
		'Gain','Domega',...
		'position',[440,180,515,220])

add_block('built-in/Inport',[sys,'/','Rotor/in_iqse'])
set_param([sys,'/','Rotor/in_iqse'],...
		'Port','2',...
		'position',[60,80,80,100])

add_block('built-in/Inport',[sys,'/','Rotor/in_psidse'])
set_param([sys,'/','Rotor/in_psidse'],...
		'position',[60,40,80,60])

add_block('built-in/Inport',[sys,'/','Rotor/in_idse'])
set_param([sys,'/','Rotor/in_idse'],...
		'Port','4',...
		'position',[60,160,80,180])

add_block('built-in/Mux',[sys,'/','Rotor/Mux'])
set_param([sys,'/','Rotor/Mux'],...
		'position',[110,31,130,189])

add_block('built-in/Fcn',[sys,'/','Rotor/Tem'])
set_param([sys,'/','Rotor/Tem'],...
		'Expr','Tfactor*(u[1]*u[2] - u[3]*u[4])',...
		'position',[150,94,310,126])

add_block('built-in/Inport',[sys,'/','Rotor/in_Tmech'])
set_param([sys,'/','Rotor/in_Tmech'],...
		'Port','5',...
		'position',[60,200,80,220])

add_block('built-in/Outport',[sys,'/','Rotor/out_Tem'])
set_param([sys,'/','Rotor/out_Tem'],...
		'position',[540,50,560,70])

add_block('built-in/Inport',[sys,'/','Rotor/in_psiqse'])
set_param([sys,'/','Rotor/in_psiqse'],...
		'Port','3',...
		'position',[60,120,80,140])
add_line([sys,'/','Rotor'],[435,200;330,200;330,160;350,160])
add_line([sys,'/','Rotor'],[520,135;530,135;520,200])
add_line([sys,'/','Rotor'],[315,110;325,110;325,60;535,60])
add_line([sys,'/','Rotor'],[315,110;350,110])
add_line([sys,'/','Rotor'],[465,135;475,135])
add_line([sys,'/','Rotor'],[380,135;390,135])
add_line([sys,'/','Rotor'],[85,210;310,210;310,135;350,135])
add_line([sys,'/','Rotor'],[520,135;545,135])
add_line([sys,'/','Rotor'],[135,110;145,110])
add_line([sys,'/','Rotor'],[85,50;105,50])
add_line([sys,'/','Rotor'],[85,90;105,90])
add_line([sys,'/','Rotor'],[85,130;105,130])
add_line([sys,'/','Rotor'],[85,170;105,170])


%     Finished composite block 'Rotor'.

set_param([sys,'/','Rotor'],...
		'orientation',2,...
		'position',[450,144,490,216])

add_block('built-in/Outport',[sys,'/','out_3'])
set_param([sys,'/','out_3'],...
		'orientation',2,...
		'Port','3',...
		'position',[380,155,400,175])

add_block('built-in/Note',[sys,'/','Tem'])
set_param([sys,'/','Tem'],...
		'position',[424,149,429,154])

add_block('built-in/Sum',[sys,'/','Sum'])
set_param([sys,'/','Sum'],...
		'orientation',2,...
		'inputs','+-',...
		'position',[345,190,360,225])

add_block('built-in/Note',[sys,'/','wr//wb'])
set_param([sys,'/','wr//wb'],...
		'position',[420,182,425,187])

add_block('built-in/Constant',[sys,'/','we//wb'])
set_param([sys,'/','we//wb'],...
		'orientation',2,...
		'position',[390,205,410,225])

add_block('built-in/Outport',[sys,'/','out_1'])
set_param([sys,'/','out_1'],...
		'position',[610,90,630,110])

add_block('built-in/Outport',[sys,'/','out_2'])
set_param([sys,'/','out_2'],...
		'Port','2',...
		'position',[605,267,625,293])
add_line(sys,[260,265;260,242;175,242;175,130;210,130])
add_line(sys,[340,210;245,210])
add_line(sys,[340,210;285,210;285,170;245,170])
add_line(sys,[385,215;365,215])
add_line(sys,[445,200;365,200])
add_line(sys,[260,280;575,280;575,195;495,195])
add_line(sys,[215,215;190,215;190,110;210,110])
add_line(sys,[255,85;555,85;555,180;495,180])
add_line(sys,[255,100;575,100;575,165;495,165])
add_line(sys,[215,165;200,165;200,290;215,290])
add_line(sys,[260,265;530,265;530,150;495,150])
add_line(sys,[255,130;305,130;305,160;245,160])
add_line(sys,[120,90;210,90])
add_line(sys,[255,100;605,100])
add_line(sys,[445,165;405,165])
add_line(sys,[445,200;440,200;440,235])
add_line(sys,[120,325;510,325;510,210;495,210])
add_line(sys,[120,270;215,270])
add_line(sys,[260,280;600,280])
add_line(sys,[255,85;265,85;265,55;160,55;160,310;215,310])
add_line(sys,[260,310;315,310;315,220;245,220])

drawnow

% Return any arguments.
if (nargin | nargout)
	% Must use feval here to access system in memory
	if (nargin > 3)
		if (flag == 0)
			eval(['[ret,x0,str,ts,xts]=',sys,'(t,x,u,flag);'])
		else
			eval(['ret =', sys,'(t,x,u,flag);'])
		end
	else
		[ret,x0,str,ts,xts] = feval(sys);
	end
else
	drawnow % Flash up the model and execute load callback
end