lcdtext.c

MSP430 examples or customized

//--------------------------------------------------------------------------
//
//  Software for MSP430 based e-meters.
//
//  THIS PROGRAM IS PROVIDED "AS IS". TI MAKES NO WARRANTIES OR
//  REPRESENTATIONS, EITHER EXPRESS, IMPLIED OR STATUTORY, 
//  INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS 
//  FOR A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR 
//  COMPLETENESS OF RESPONSES, RESULTS AND LACK OF NEGLIGENCE. 
//  TI DISCLAIMS ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET 
//  POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY 
//  INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO THE PROGRAM OR 
//  YOUR USE OF THE PROGRAM.
//
//  IN NO EVENT SHALL TI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, 
//  CONSEQUENTIAL OR INDIRECT DAMAGES, HOWEVER CAUSED, ON ANY 
//  THEORY OF LIABILITY AND WHETHER OR NOT TI HAS BEEN ADVISED 
//  OF THE POSSIBILITY OF SUCH DAMAGES, ARISING IN ANY WAY OUT 
//  OF THIS AGREEMENT, THE PROGRAM, OR YOUR USE OF THE PROGRAM. 
//  EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, COST OF 
//  REMOVAL OR REINSTALLATION, COMPUTER TIME, LABOR COSTS, LOSS 
//  OF GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, OR LOSS OF 
//  USE OR INTERRUPTION OF BUSINESS. IN NO EVENT WILL TI'S 
//  AGGREGATE LIABILITY UNDER THIS AGREEMENT OR ARISING OUT OF 
//  YOUR USE OF THE PROGRAM EXCEED FIVE HUNDRED DOLLARS 
//  (U.S.$500).
//
//  Unless otherwise stated, the Program written and copyrighted 
//  by Texas Instruments is distributed as "freeware".  You may, 
//  only under TI's copyright in the Program, use and modify the 
//  Program without any charge or restriction.  You may 
//  distribute to third parties, provided that you transfer a 
//  copy of this license to the third party and the third party 
//  agrees to these terms by its first use of the Program. You 
//  must reproduce the copyright notice and any other legend of 
//  ownership on each copy or partial copy, of the Program.
//
//  You acknowledge and agree that the Program contains 
//  copyrighted material, trade secrets and other TI proprietary 
//  information and is protected by copyright laws, 
//  international copyright treaties, and trade secret laws, as 
//  well as other intellectual property laws.  To protect TI's 
//  rights in the Program, you agree not to decompile, reverse 
//  engineer, disassemble or otherwise translate any object code 
//  versions of the Program to a human-readable form.  You agree 
//  that in no event will you alter, remove or destroy any 
//  copyright notice included in the Program.  TI reserves all 
//  rights not specifically granted under this license. Except 
//  as specifically provided herein, nothing in this agreement 
//  shall be construed as conferring by implication, estoppel, 
//  or otherwise, upon you, any license or other right under any 
//  TI patents, copyrights or trade secrets.
//
//  You may not use the Program in non-TI devices.
//
//	File: LCDtext.c
//
//  Stefan Schauer
//  Texas Instruments Freising
//
//  Date        Comments
//  =====================
//	2002-08-15	Initial version
//      2004-05-28      Adopted for FE427 Demo
//
//    Version 1.0 first release for Application Report
//    06/04/04
//
//
//--------------------------------------------------------------------------
#include <stdint.h>
#include "emeter-toolkit.h"
#include "fet4xx_rtclcd.h"

//Display text on the display. stops after char < ' ' is detected

void LCDtext(unsigned char text[], int pos, int digits)
{
	int i = 0;

	pos--;

        while (digits >= pos)
        {
              Direct2LCD(CHAR_SPACE, digits--);
        }     
        while ((text[i] >= ' ') && (pos >=0))
        {
			if (text[i] == ' ')
			{
				Direct2LCD(CHAR_SPACE, pos--);
			}
			else if (text[i] == '.')
			{
				setPoint(pos);
			}
			else if (text[i] == ':')
			{
				setColon(pos);
			}
			else
			{
				if ((text[i] >= 'a') && (text[i] <= 'z'))
					{Char2LCD(text[i]-0x20, pos--) ;}	// Convert to upper-case
				else
					{Char2LCD(text[i], pos--) ;}
				}
	
			if (text[i-1] == ':')
			{
				setColon(pos+1);
			}
            else if (text[i-1] == '.')
			{
				setPoint(pos+1);
			}
			i ++ ;
        }

        while (pos >= 0)
        {
              Direct2LCD(CHAR_SPACE, pos--);
        }     
}