attiny26.xml

单片机的USB下载线的驱动和驱动的安装及使用方法

<AVRPART>
	<FUSE>
		<LOW>
			<NMB_FUSE_BITS>8</NMB_FUSE_BITS>
			<FUSE7>
				<NAME>PLLCK</NAME>
				<TEXT>Use PLL for internal clock</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE7>
			<FUSE6>
				<NAME>CKOPT</NAME>
				<TEXT>Oscillator options</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE6>
			<FUSE5>
				<NAME>SUT1</NAME>
				<TEXT>Select start-up time</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE5>
			<FUSE4>
				<NAME>SUT0</NAME>
				<TEXT>Select start-up time</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE4>
			<FUSE3>
				<NAME>CKSEL3</NAME>
				<TEXT>Select Clock Source</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE3>
			<FUSE2>
				<NAME>CKSEL2</NAME>
				<TEXT>Select Clock Source</TEXT>
				<DEFAULT>0</DEFAULT>
			</FUSE2>
			<FUSE1>
				<NAME>CKSEL1</NAME>
				<TEXT>Select Clock Source</TEXT>
				<DEFAULT>0</DEFAULT>
			</FUSE1>
			<FUSE0>
				<NAME>CKSEL0</NAME>
				<TEXT>Select Clock Source</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE0>
			<NMB_TEXT>63</NMB_TEXT>
			<TEXT1>
				<MASK>0x40</MASK>
				<VALUE>0x00</VALUE>
				<TEXT>CKOPT fuse (operation dependent of CKSEL fuses); [CKOPT=0]</TEXT>
			</TEXT1>
			<TEXT2>
				<MASK>0xBF</MASK>
				<VALUE>0x01</VALUE>
				<TEXT>PLL Clock; Start-up time: 1K CK + 0 ms; [CKSEL=0001 SUT=00]</TEXT>
			</TEXT2>
			<TEXT3>
				<MASK>0xBF</MASK>
				<VALUE>0x11</VALUE>
				<TEXT>PLL Clock; Start-up time: 1K CK + 4 ms; [CKSEL=0001 SUT=01]</TEXT>
			</TEXT3>
			<TEXT4>
				<MASK>0xBF</MASK>
				<VALUE>0x21</VALUE>
				<TEXT>PLL Clock; Start-up time: 1K CK + 64 ms; [CKSEL=0001 SUT=10]</TEXT>
			</TEXT4>
			<TEXT5>
				<MASK>0xBF</MASK>
				<VALUE>0x31</VALUE>
				<TEXT>PLL Clock; Start-up time: 16K CK + 64 ms; [CKSEL=0001 SUT=11]</TEXT>
			</TEXT5>
			<TEXT6>
				<MASK>0xBF</MASK>
				<VALUE>0x80</VALUE>
				<TEXT>Ext. Clock; Start-up time: 6 CK + 0 ms; [CKSEL=0000 SUT=00]</TEXT>
			</TEXT6>
			<TEXT7>
				<MASK>0xBF</MASK>
				<VALUE>0x90</VALUE>
				<TEXT>Ext. Clock; Start-up time: 6 CK + 4 ms; [CKSEL=0000 SUT=01]</TEXT>
			</TEXT7>
			<TEXT8>
				<MASK>0xBF</MASK>
				<VALUE>0xA0</VALUE>
				<TEXT>Ext. Clock; Start-up time: 6 CK + 64 ms; [CKSEL=0000 SUT=10]</TEXT>
			</TEXT8>
			<TEXT9>
				<MASK>0xBF</MASK>
				<VALUE>0x81</VALUE>
				<TEXT>Int. RC Osc. 1 MHz; Start-up time: 6 CK + 0 ms; [CKSEL=0001 SUT=00]</TEXT>
			</TEXT9>
			<TEXT10>
				<MASK>0xBF</MASK>
				<VALUE>0x91</VALUE>
				<TEXT>Int. RC Osc. 1 MHz; Start-up time: 6 CK + 4 ms; [CKSEL=0001 SUT=01]</TEXT>
			</TEXT10>
			<TEXT11>
				<MASK>0xBF</MASK>
				<VALUE>0xA1</VALUE>
				<TEXT>Int. RC Osc. 1 MHz; Start-up time: 6 CK + 64 ms; [CKSEL=0001 SUT=10]; default value</TEXT>
			</TEXT11>
			<TEXT12>
				<MASK>0xBF</MASK>
				<VALUE>0x82</VALUE>
				<TEXT>Int. RC Osc. 2 MHz; Start-up time: 6 CK + 0 ms; [CKSEL=0010 SUT=00]</TEXT>
			</TEXT12>
			<TEXT13>
				<MASK>0xBF</MASK>
				<VALUE>0x92</VALUE>
				<TEXT>Int. RC Osc. 2 MHz; Start-up time: 6 CK + 4 ms; [CKSEL=0010 SUT=01]</TEXT>
			</TEXT13>
			<TEXT14>
				<MASK>0xBF</MASK>
				<VALUE>0xA2</VALUE>
				<TEXT>Int. RC Osc. 2 MHz; Start-up time: 6 CK + 64 ms; [CKSEL=0010 SUT=10]</TEXT>
			</TEXT14>
			<TEXT15>
				<MASK>0xBF</MASK>
				<VALUE>0x83</VALUE>
				<TEXT>Int. RC Osc. 4 MHz; Start-up time: 6 CK + 0 ms; [CKSEL=0011 SUT=00]</TEXT>
			</TEXT15>
			<TEXT16>
				<MASK>0xBF</MASK>
				<VALUE>0x93</VALUE>
				<TEXT>Int. RC Osc. 4 MHz; Start-up time: 6 CK + 4 ms; [CKSEL=0011 SUT=01]</TEXT>
			</TEXT16>
			<TEXT17>
				<MASK>0xBF</MASK>
				<VALUE>0xA3</VALUE>
				<TEXT>Int. RC Osc. 4 MHz; Start-up time: 6 CK + 64 ms; [CKSEL=0011 SUT=10]</TEXT>
			</TEXT17>
			<TEXT18>
				<MASK>0xBF</MASK>
				<VALUE>0x84</VALUE>
				<TEXT>Int. RC Osc. 8 MHz; Start-up time: 6 CK + 0 ms; [CKSEL=0100 SUT=00]</TEXT>
			</TEXT18>
			<TEXT19>
				<MASK>0xBF</MASK>
				<VALUE>0x94</VALUE>
				<TEXT>Int. RC Osc. 8 MHz; Start-up time: 6 CK + 4 ms; [CKSEL=0100 SUT=01]</TEXT>
			</TEXT19>
			<TEXT20>
				<MASK>0xBF</MASK>
				<VALUE>0xA4</VALUE>
				<TEXT>Int. RC Osc. 8 MHz; Start-up time: 6 CK + 64 ms; [CKSEL=0100 SUT=10]</TEXT>
			</TEXT20>
			<TEXT21>
				<MASK>0xBF</MASK>
				<VALUE>0x85</VALUE>
				<TEXT>Ext. RC Osc.         -  0.9 MHz; Start-up time: 18 CK + 0 ms; [CKSEL=0101 SUT=00]</TEXT>
			</TEXT21>
			<TEXT22>
				<MASK>0xBF</MASK>
				<VALUE>0x95</VALUE>
				<TEXT>Ext. RC Osc.         -  0.9 MHz; Start-up time: 18 CK + 4 ms; [CKSEL=0101 SUT=01]</TEXT>
			</TEXT22>
			<TEXT23>
				<MASK>0xBF</MASK>
				<VALUE>0xA5</VALUE>
				<TEXT>Ext. RC Osc.         -  0.9 MHz; Start-up time: 18 CK + 64 ms; [CKSEL=0101 SUT=10]</TEXT>
			</TEXT23>
			<TEXT24>
				<MASK>0xBF</MASK>
				<VALUE>0xB5</VALUE>
				<TEXT>Ext. RC Osc.         -  0.9 MHz; Start-up time: 6 CK + 4 ms; [CKSEL=0101 SUT=11]</TEXT>
			</TEXT24>
			<TEXT25>
				<MASK>0xBF</MASK>
				<VALUE>0x86</VALUE>
				<TEXT>Ext. RC Osc. 0.9 MHz -  3.0 MHz; Start-up time: 18 CK + 0 ms; [CKSEL=0110 SUT=00]</TEXT>
			</TEXT25>
			<TEXT26>
				<MASK>0xBF</MASK>
				<VALUE>0x96</VALUE>
				<TEXT>Ext. RC Osc. 0.9 MHz -  3.0 MHz; Start-up time: 18 CK + 4 ms; [CKSEL=0110 SUT=01]</TEXT>
			</TEXT26>
			<TEXT27>
				<MASK>0xBF</MASK>
				<VALUE>0xA6</VALUE>
				<TEXT>Ext. RC Osc. 0.9 MHz -  3.0 MHz; Start-up time: 18 CK + 64 ms; [CKSEL=0110 SUT=10]</TEXT>
			</TEXT27>
			<TEXT28>
				<MASK>0xBF</MASK>
				<VALUE>0xB6</VALUE>
				<TEXT>Ext. RC Osc. 0.9 MHz -  3.0 MHz; Start-up time: 6 CK + 4 ms; [CKSEL=0110 SUT=11]</TEXT>
			</TEXT28>
			<TEXT29>
				<MASK>0xBF</MASK>
				<VALUE>0x87</VALUE>
				<TEXT>Ext. RC Osc. 3.0 MHz -  8.0 MHz; Start-up time: 18 CK + 0 ms; [CKSEL=0111 SUT=00]</TEXT>
			</TEXT29>
			<TEXT30>
				<MASK>0xBF</MASK>
				<VALUE>0x97</VALUE>
				<TEXT>Ext. RC Osc. 3.0 MHz -  8.0 MHz; Start-up time: 18 CK + 4 ms; [CKSEL=0111 SUT=01]</TEXT>
			</TEXT30>
			<TEXT31>
				<MASK>0xBF</MASK>
				<VALUE>0xA7</VALUE>
				<TEXT>Ext. RC Osc. 3.0 MHz -  8.0 MHz; Start-up time: 18 CK + 64 ms; [CKSEL=0111 SUT=10]</TEXT>
			</TEXT31>
			<TEXT32>
				<MASK>0xBF</MASK>
				<VALUE>0xB7</VALUE>
				<TEXT>Ext. RC Osc. 3.0 MHz -  8.0 MHz; Start-up time: 6 CK + 4 ms; [CKSEL=0111 SUT=11]</TEXT>
			</TEXT32>
			<TEXT33>
				<MASK>0xBF</MASK>
				<VALUE>0x88</VALUE>
				<TEXT>Ext. RC Osc. 8.0 MHz - 12.0 MHz; Start-up time: 18 CK + 0 ms; [CKSEL=1000 SUT=00]</TEXT>
			</TEXT33>
			<TEXT34>
				<MASK>0xBF</MASK>
				<VALUE>0x98</VALUE>
				<TEXT>Ext. RC Osc. 8.0 MHz - 12.0 MHz; Start-up time: 18 CK + 4 ms; [CKSEL=1000 SUT=01]</TEXT>
			</TEXT34>
			<TEXT35>
				<MASK>0xBF</MASK>
				<VALUE>0xA8</VALUE>
				<TEXT>Ext. RC Osc. 8.0 MHz - 12.0 MHz; Start-up time: 18 CK + 64 ms; [CKSEL=1000 SUT=10]</TEXT>
			</TEXT35>
			<TEXT36>
				<MASK>0xBF</MASK>
				<VALUE>0xB8</VALUE>
				<TEXT>Ext. RC Osc. 8.0 MHz - 12.0 MHz; Start-up time: 6 CK + 4 ms; [CKSEL=1000 SUT=11]</TEXT>
			</TEXT36>
			<TEXT37>
				<MASK>0xBF</MASK>
				<VALUE>0x89</VALUE>
				<TEXT>Ext. Low-Freq. Crystal; Start-up time: 1K CK + 4 ms; [CKSEL=1001 SUT=00]</TEXT>
			</TEXT37>
			<TEXT38>
				<MASK>0xBF</MASK>
				<VALUE>0x99</VALUE>
				<TEXT>Ext. Low-Freq. Crystal; Start-up time: 1K CK + 64 ms; [CKSEL=1001 SUT=01]</TEXT>
			</TEXT38>
			<TEXT39>
				<MASK>0xBF</MASK>
				<VALUE>0xA9</VALUE>
				<TEXT>Ext. Low-Freq. Crystal; Start-up time: 32K CK + 64 ms; [CKSEL=1001 SUT=10]</TEXT>
			</TEXT39>
			<TEXT40>
				<MASK>0xBF</MASK>
				<VALUE>0x8A</VALUE>
				<TEXT>Ext. Crystal/Resonator Low Freq.; Start-up time: 258 CK + 4 ms; [CKSEL=1010 SUT=00]</TEXT>
			</TEXT40>
			<TEXT41>
				<MASK>0xBF</MASK>
				<VALUE>0x9A</VALUE>
				<TEXT>Ext. Crystal/Resonator Low Freq.; Start-up time: 258 CK + 64 ms; [CKSEL=1010 SUT=01]</TEXT>
			</TEXT41>
			<TEXT42>
				<MASK>0xBF</MASK>
				<VALUE>0xAA</VALUE>
				<TEXT>Ext. Crystal/Resonator Low Freq.; Start-up time: 1K CK + 0 ms; [CKSEL=1010 SUT=10]</TEXT>
			</TEXT42>
			<TEXT43>
				<MASK>0xBF</MASK>
				<VALUE>0xBA</VALUE>
				<TEXT>Ext. Crystal/Resonator Low Freq.; Start-up time: 1K CK + 4 ms; [CKSEL=1010 SUT=11]</TEXT>
			</TEXT43>
			<TEXT44>
				<MASK>0xBF</MASK>
				<VALUE>0x8B</VALUE>
				<TEXT>Ext. Crystal/Resonator Low Freq.; Start-up time: 1K CK + 64 ms; [CKSEL=1011 SUT=00]</TEXT>
			</TEXT44>
			<TEXT45>
				<MASK>0xBF</MASK>
				<VALUE>0x9B</VALUE>
				<TEXT>Ext. Crystal/Resonator Low Freq.; Start-up time: 16K CK + 0 ms; [CKSEL=1011 SUT=01]</TEXT>
			</TEXT45>
			<TEXT46>
				<MASK>0xBF</MASK>
				<VALUE>0xAB</VALUE>
				<TEXT>Ext. Crystal/Resonator Low Freq.; Start-up time: 16K CK + 4 ms; [CKSEL=1011 SUT=10]</TEXT>
			</TEXT46>
			<TEXT47>
				<MASK>0xBF</MASK>
				<VALUE>0xBB</VALUE>
				<TEXT>Ext. Crystal/Resonator Low Freq.; Start-up time: 16K CK + 64 ms; [CKSEL=1011 SUT=11]</TEXT>
			</TEXT47>
			<TEXT48>
				<MASK>0xBF</MASK>
				<VALUE>0x8C</VALUE>
				<TEXT>Ext. Crystal/Resonator Medium Freq.; Start-up time: 258 CK + 4 ms; [CKSEL=1100 SUT=00]</TEXT>
			</TEXT48>
			<TEXT49>
				<MASK>0xBF</MASK>
				<VALUE>0x9C</VALUE>
				<TEXT>Ext. Crystal/Resonator Medium Freq.; Start-up time: 258 CK + 64 ms; [CKSEL=1100 SUT=01]</TEXT>
			</TEXT49>
			<TEXT50>
				<MASK>0xBF</MASK>
				<VALUE>0xAC</VALUE>
				<TEXT>Ext. Crystal/Resonator Medium Freq.; Start-up time: 1K CK + 0 ms; [CKSEL=1100 SUT=10]</TEXT>
			</TEXT50>
			<TEXT51>
				<MASK>0xBF</MASK>
				<VALUE>0xBC</VALUE>
				<TEXT>Ext. Crystal/Resonator Medium Freq.; Start-up time: 1K CK + 4 ms; [CKSEL=1100 SUT=11]</TEXT>
			</TEXT51>
			<TEXT52>
				<MASK>0xBF</MASK>
				<VALUE>0x8D</VALUE>
				<TEXT>Ext. Crystal/Resonator Medium Freq.; Start-up time: 1K CK + 64 ms; [CKSEL=1101 SUT=00]</TEXT>
			</TEXT52>
			<TEXT53>
				<MASK>0xBF</MASK>
				<VALUE>0x9D</VALUE>
				<TEXT>Ext. Crystal/Resonator Medium Freq.; Start-up time: 16K CK + 0 ms; [CKSEL=1101 SUT=01]</TEXT>
			</TEXT53>
			<TEXT54>
				<MASK>0xBF</MASK>
				<VALUE>0xAD</VALUE>
				<TEXT>Ext. Crystal/Resonator Medium Freq.; Start-up time: 16K CK + 4 ms; [CKSEL=1101 SUT=10]</TEXT>
			</TEXT54>
			<TEXT55>
				<MASK>0xBF</MASK>
				<VALUE>0xBD</VALUE>
				<TEXT>Ext. Crystal/Resonator Medium Freq.; Start-up time: 16K CK + 64 ms; [CKSEL=1101 SUT=11]</TEXT>
			</TEXT55>
			<TEXT56>
				<MASK>0xBF</MASK>
				<VALUE>0x8E</VALUE>
				<TEXT>Ext. Crystal/Resonator High Freq.; Start-up time: 258 CK + 4 ms; [CKSEL=1110 SUT=00]</TEXT>
			</TEXT56>
			<TEXT57>
				<MASK>0xBF</MASK>
				<VALUE>0x9E</VALUE>
				<TEXT>Ext. Crystal/Resonator High Freq.; Start-up time: 258 CK + 64 ms; [CKSEL=1110 SUT=01]</TEXT>
			</TEXT57>
			<TEXT58>
				<MASK>0xBF</MASK>
				<VALUE>0xAE</VALUE>
				<TEXT>Ext. Crystal/Resonator High Freq.; Start-up time: 1K CK + 0 ms; [CKSEL=1110 SUT=10]</TEXT>
			</TEXT58>
			<TEXT59>
				<MASK>0xBF</MASK>
				<VALUE>0xBE</VALUE>
				<TEXT>Ext. Crystal/Resonator High Freq.; Start-up time: 1K CK + 4 ms; [CKSEL=1110 SUT=11]</TEXT>
			</TEXT59>
			<TEXT60>
				<MASK>0xBF</MASK>
				<VALUE>0x8F</VALUE>
				<TEXT>Ext. Crystal/Resonator High Freq.; Start-up time: 1K CK + 64 ms; [CKSEL=1111 SUT=00]</TEXT>
			</TEXT60>
			<TEXT61>
				<MASK>0xBF</MASK>
				<VALUE>0x9F</VALUE>
				<TEXT>Ext. Crystal/Resonator High Freq.; Start-up time: 16K CK + 0 ms; [CKSEL=1111 SUT=01]</TEXT>
			</TEXT61>
			<TEXT62>
				<MASK>0xBF</MASK>
				<VALUE>0xAF</VALUE>
				<TEXT>Ext. Crystal/Resonator High Freq.; Start-up time: 16K CK + 4 ms; [CKSEL=1111 SUT=10]</TEXT>
			</TEXT62>
			<TEXT63>
				<MASK>0xBF</MASK>
				<VALUE>0xBF</VALUE>
				<TEXT>Ext. Crystal/Resonator High Freq.; Start-up time: 16K CK + 64 ms; [CKSEL=1111 SUT=11]</TEXT>
			</TEXT63>
		</LOW>
		<HIGH>
			<NMB_FUSE_BITS>5</NMB_FUSE_BITS>
			<FUSE4>
				<NAME>RSTDISBL</NAME>
				<TEXT>Select if PB/ is I/O pin or RESET pin</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE4>
			<FUSE3>
				<NAME>SPIEN</NAME>
				<TEXT>Enable Serial Program and Data Downloading</TEXT>
				<DEFAULT>0</DEFAULT>
			</FUSE3>
			<FUSE2>
				<NAME>EESAVE</NAME>
				<TEXT>EEPROM memory is preserved through the Chip Erase</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE2>
			<FUSE1>
				<NAME>BODLEVEL</NAME>
				<TEXT>Brown out detector trigger level</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE1>
			<FUSE0>
				<NAME>BODEN</NAME>
				<TEXT>Brown out detector enable</TEXT>
				<DEFAULT>1</DEFAULT>
			</FUSE0>
			<NMB_TEXT>6</NMB_TEXT>
			<TEXT1>
				<MASK>0x10</MASK>
				<VALUE>0x00</VALUE>
				<TEXT>Reset Disabled (Enable PB7 as i/o pin); [RSTDISBL=0]</TEXT>
			</TEXT1>
			<TEXT2>
				<MASK>0x08</MASK>
				<VALUE>0x00</VALUE>
				<TEXT>Serial program downloading (SPI) enabled; [SPIEN=0]</TEXT>
			</TEXT2>
			<TEXT3>
				<MASK>0x04</MASK>
				<VALUE>0x00</VALUE>
				<TEXT>Preserve EEPROM memory through the Chip Erase cycle; [EESAVE=0]</TEXT>
			</TEXT3>
			<TEXT4>
				<MASK>0x02</MASK>
				<VALUE>0x00</VALUE>
				<TEXT>Brown-out detection level at VCC=4.0 V; [BODLEVEL=0]</TEXT>
			</TEXT4>
			<TEXT5>
				<MASK>0x02</MASK>
				<VALUE>0x02</VALUE>
				<TEXT>Brown-out detection level at VCC=2.7 V; [BODLEVEL=1]</TEXT>
			</TEXT5>
			<TEXT6>
				<MASK>0x01</MASK>
				<VALUE>0x00</VALUE>
				<TEXT>Brown-out detection enabled; [BODEN=0]</TEXT>
			</TEXT6>
		</HIGH>
	</FUSE>
	<LOCKBIT>
		<TEXT>[LB1 = 1 :  LB2 = 1] No memory lock features enabled. [LB1 = 0 :  LB2 = 1] Further programming of Flash and EEPROM is enabled. [LB1 = 0 :  LB2 = 0] Same as previous, but verify is also disabled</TEXT>
		<NMB_TEXT>3</NMB_TEXT>
		<NMB_LOCK_BITS>2</NMB_LOCK_BITS>
		<TEXT1>
			<MASK>0x03</MASK>
			<VALUE>0x03</VALUE>
			<TEXT>Mode 1: No memory lock features enabled</TEXT>
		</TEXT1>
		<TEXT2>
			<MASK>0x03</MASK>
			<VALUE>0x02</VALUE>
			<TEXT>Mode 2: Further programming disabled</TEXT>
		</TEXT2>
		<TEXT3>
			<MASK>0x03</MASK>
			<VALUE>0x00</VALUE>
			<TEXT>Mode 3: Further programming and verification disabled</TEXT>
		</TEXT3>
		<LOCKBIT0>
			<NAME>LB1</NAME>
			<TEXT>Lockbit</TEXT>
		</LOCKBIT0>
		<LOCKBIT1>
			<NAME>LB2</NAME>
			<TEXT>Lockbit</TEXT>
		</LOCKBIT1>
	</LOCKBIT>
</AVRPART>