spimgr.lst

cc2430应用实例

##############################################################################
#                                                                            #
# IAR 8051 C/C++ Compiler V7.20H/W32                   08/Mar/2009  09:13:27 #
# Copyright 2004-2006 IAR Systems. All rights reserved.                      #
#                                                                            #
#    Core               =  plain                                             #
#    Code model         =  banked                                            #
#    Data model         =  large                                             #
#    Calling convention =  xdata reentrant                                   #
#    Constant location  =  data                                              #
#    Dptr setup         =  1,16                                              #
#    Source file        =  C:\Texas Instruments\ZStack-1.4.2-1.1.0\Component #
#                          s\mt\SPIMgr.c                                     #
#    Command line       =  -f "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proje #
#                          cts\zstack\Samples\GenericApp\CC2430DB\..\..\..\T #
#                          ools\CC2430DB\f8wCoord.cfg" (-DCPU32MHZ           #
#                          -DFORCE_MAC_NEAR -DROOT=__near_func               #
#                          -DMAC_CFG_APP_PENDING_QUEUE=TRUE                  #
#                          -DZDO_COORDINATOR -DRTR_NWK -DBLINK_LEDS          #
#                          "-DCONST=const __code" -DGENERIC=__generic) -f    #
#                          "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
#                          \zstack\Samples\GenericApp\CC2430DB\..\..\..\Tool #
#                          s\CC2430DB\f8wConfig.cfg" (-DSECURE=0             #
#                          -DDEFAULT_CHANLIST=0x00000800                     #
#                          -DZDAPP_CONFIG_PAN_ID=0xFFFF                      #
#                          -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
#                          ASK=0x007F -DBEACON_REQUEST_DELAY=100             #
#                          -DBEACON_REQ_DELAY_MASK=0x00FF                    #
#                          -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
#                          OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7           #
#                          -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3  #
#                          -DNWK_MAX_DATA_RETRIES=2                          #
#                          -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9        #
#                          -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20          #
#                          -DNWK_MAX_BINDING_ENTRIES=10                      #
#                          -DMAX_BINDING_CLUSTER_IDS=5                       #
#                          "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09,     #
#                          0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08,   #
#                          0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE     #
#                          -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100           #
#                          -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440   #
#                          -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR      #
#                          Systems\Embedded Workbench 4.05 Evaluation        #
#                          version\8051\inc\" -I "C:\Program Files\IAR       #
#                          Systems\Embedded Workbench 4.05 Evaluation        #
#                          version\8051\inc\clib\" -I "C:\Texas              #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\" -I "C:\Texas          #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\Source\" -I          #
#                          "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
#                          \zstack\Samples\GenericApp\CC2430DB\..\..\..\ZMai #
#                          n\TI2430DB\" -I "C:\Texas                         #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\mt\" -I "C:\Texas Instruments\ZStack-1.4.2-1.1 #
#                          .0\Projects\zstack\Samples\GenericApp\CC2430DB\.. #
#                          \..\..\..\..\Components\hal\include\" -I          #
#                          "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
#                          \zstack\Samples\GenericApp\CC2430DB\..\..\..\..\. #
#                          .\Components\hal\target\CC2430DB\" -I "C:\Texas   #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\osal\mcu\ccsoc\" -I "C:\Texas                  #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\osal\include\" -I "C:\Texas                    #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\stack\af\" -I "C:\Texas                        #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\stack\nwk\" -I "C:\Texas                       #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\stack\sec\" -I "C:\Texas                       #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\stack\sys\" -I "C:\Texas                       #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\stack\zdo\" -I "C:\Texas                       #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\zmac\f8w\" -I "C:\Texas                        #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\zmac\" -I "C:\Texas Instruments\ZStack-1.4.2-1 #
#                          .1.0\Projects\zstack\Samples\GenericApp\CC2430DB\ #
#                          ..\..\..\..\..\Components\services\saddr\" -I     #
#                          "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
#                          \zstack\Samples\GenericApp\CC2430DB\..\..\..\..\. #
#                          .\Components\services\sdata\" -I "C:\Texas        #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\mac\include\" -I "C:\Texas                     #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\mac\high_level\" -I "C:\Texas                  #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\mac\low_level\srf03\" -I "C:\Texas             #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
#                          ts\mac\low_level\srf03\single_chip\" -D CC2430DB  #
#                          -D COORDINATOR_BINDING -D xZTOOL_P2 -D xMT_TASK   #
#                          -D xMT_ZDO_FUNC -D xLCD_SUPPORTED=DEBUG -lC       #
#                          "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
#                          \zstack\Samples\GenericApp\CC2430DB\CoordinatorDB #
#                          \List\" -lA "C:\Texas Instruments\ZStack-1.4.2-1. #
#                          1.0\Projects\zstack\Samples\GenericApp\CC2430DB\C #
#                          oordinatorDB\List\" --diag_suppress Pe001,Pa010   #
#                          --diag_remark pe550 -o "C:\Texas                  #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\GenericApp\CC2430DB\CoordinatorDB\Obj\" -e  #
#                          --require_prototypes -z9 --no_code_motion         #
#                          --debug --core=plain --dptr=16,1                  #
#                          --data_model=large --code_model=banked            #
#                          --calling_convention=xdata_reentrant              #
#                          --place_constants=data --nr_virtual_regs 8        #
#                          "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Componen #
#                          ts\mt\SPIMgr.c"                                   #
#    List file          =  C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
#                          zstack\Samples\GenericApp\CC2430DB\CoordinatorDB\ #
#                          List\SPIMgr.lst                                   #
#    Object file        =  C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
#                          zstack\Samples\GenericApp\CC2430DB\CoordinatorDB\ #
#                          Obj\SPIMgr.r51                                    #
#                                                                            #
#                                                                            #
##############################################################################

C:\Texas Instruments\ZStack-1.4.2-1.1.0\Components\mt\SPIMgr.c
      1          /***************************************************************************************************
      2              Filename:       SPIMgr.c
      3              Revised:        $Date: 2006-10-09 17:35:06 -0700 (Mon, 09 Oct 2006) $
      4              Revision:       $Revision: 12239 $
      5          
      6              Description:
      7                 This module handles anything dealing with the serial port.
      8          
      9              Copyright (c) 2006 by Texas Instruments, Inc.
     10              All Rights Reserved.  Permission to use, reproduce, copy, prepare
     11              derivative works, modify, distribute, perform, display or sell this
     12              software and/or its documentation for any purpose is prohibited
     13              without the express written consent of Texas Instruments, Inc.
     14          ***************************************************************************************************/
     15          
     16          
     17          /***************************************************************************************************
     18           *                                           INCLUDES
     19           ***************************************************************************************************/
     20          #include "ZComDef.h"
     21          #include "OSAL.h"
     22          #include "hal_uart.h"
     23          #include "MTEL.h"
     24          #include "SPIMgr.h"
     25          #include "OSAL_Memory.h"
     26          
     27          
     28          /***************************************************************************************************
     29           *                                            MACROS
     30           ***************************************************************************************************/
     31          
     32          /***************************************************************************************************
     33           *                                           CONSTANTS
     34           ***************************************************************************************************/
     35          
     36          /* State values for ZTool protocal */
     37          #define SOP_STATE      0x00
     38          #define CMD_STATE1     0x01
     39          #define CMD_STATE2     0x02
     40          #define LEN_STATE      0x03
     41          #define DATA_STATE     0x04
     42          #define FCS_STATE      0x05
     43          
     44          /***************************************************************************************************
     45           *                                            TYPEDEFS
     46           ***************************************************************************************************/
     47          
     48          /***************************************************************************************************
     49           *                                         GLOBAL VARIABLES
     50           ***************************************************************************************************/

   \                                 In segment XDATA_Z, align 1, keep-with-next
   \   000000                REQUIRE __INIT_XDATA_Z
     51          byte App_TaskID;
   \                     App_TaskID:
   \   000000                DS 1
     52          
     53          /* ZTool protocal parameters */
     54          
     55          #if defined (ZTOOL_P1) || defined (ZTOOL_P2)
     56          uint8 state;
     57          uint8  CMD_Token[2];
     58          uint8  LEN_Token;
     59          uint8  FSC_Token;
     60          mtOSALSerialData_t  *SPI_Msg;
     61          uint8  tempDataLen;
     62          #endif //ZTOOL
     63          
     64          #if defined (ZAPP_P1) || defined (ZAPP_P2)
     65          uint16  SPIMgr_MaxZAppBufLen;
     66          bool    SPIMgr_ZAppRxStatus;
     67          #endif
     68          
     69          
     70          /***************************************************************************************************
     71           *                                          LOCAL FUNCTIONS
     72           ***************************************************************************************************/
     73