📄 mac_sleep.lst
字号:
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 08/Mar/2009 09:13:33 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Component #
# s\mac\low_level\srf03\mac_sleep.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proje #
# cts\zstack\Samples\GenericApp\CC2430DB\..\..\..\T #
# ools\CC2430DB\f8wCoord.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_CFG_APP_PENDING_QUEUE=TRUE #
# -DZDO_COORDINATOR -DRTR_NWK -DBLINK_LEDS #
# "-DCONST=const __code" -DGENERIC=__generic) -f #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\..\..\..\Tool #
# s\CC2430DB\f8wConfig.cfg" (-DSECURE=0 #
# -DDEFAULT_CHANLIST=0x00000800 #
# -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\Source\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\..\..\..\ZMai #
# n\TI2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mt\" -I "C:\Texas Instruments\ZStack-1.4.2-1.1 #
# .0\Projects\zstack\Samples\GenericApp\CC2430DB\.. #
# \..\..\..\..\Components\hal\include\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\..\..\..\..\. #
# .\Components\hal\target\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\osal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\af\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\sec\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\zdo\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\zmac\" -I "C:\Texas Instruments\ZStack-1.4.2-1 #
# .1.0\Projects\zstack\Samples\GenericApp\CC2430DB\ #
# ..\..\..\..\..\Components\services\saddr\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\..\..\..\..\. #
# .\Components\services\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mac\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mac\low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mac\low_level\srf03\single_chip\" -D CC2430DB #
# -D COORDINATOR_BINDING -D xZTOOL_P2 -D xMT_TASK #
# -D xMT_ZDO_FUNC -D xLCD_SUPPORTED=DEBUG -lC #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\CoordinatorDB #
# \List\" -lA "C:\Texas Instruments\ZStack-1.4.2-1. #
# 1.0\Projects\zstack\Samples\GenericApp\CC2430DB\C #
# oordinatorDB\List\" --diag_suppress Pe001,Pa010 #
# --diag_remark pe550 -o "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\CoordinatorDB\Obj\" -e #
# --require_prototypes -z9 --no_code_motion #
# --debug --core=plain --dptr=16,1 #
# --data_model=large --code_model=banked #
# --calling_convention=xdata_reentrant #
# --place_constants=data --nr_virtual_regs 8 #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Componen #
# ts\mac\low_level\srf03\mac_sleep.c" #
# List file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\GenericApp\CC2430DB\CoordinatorDB\ #
# List\mac_sleep.lst #
# Object file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\GenericApp\CC2430DB\CoordinatorDB\ #
# Obj\mac_sleep.r51 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2-1.1.0\Components\mac\low_level\srf03\mac_sleep.c
1 /**************************************************************************************************
2 Filename:
3 Revised: $Date: 2007-02-01 11:24:21 -0800 (Thu, 01 Feb 2007) $
4 Revision: $Revision: 13416 $
5
6 Description:
7
8 Describe the purpose and contents of the file.
9
10 Copyright (c) 2006 by Texas Instruments, Inc.
11 All Rights Reserved. Permission to use, reproduce, copy, prepare
12 derivative works, modify, distribute, perform, display or sell this
13 software and/or its documentation for any purpose is prohibited
14 without the express written consent of Texas Instruments, Inc.
15 **************************************************************************************************/
16
17
18
19 /* ------------------------------------------------------------------------------------------------
20 * Includes
21 * ------------------------------------------------------------------------------------------------
22 */
23
24 /* hal */
25 #include "hal_types.h"
26
27 /* exported low-level */
28 #include "mac_low_level.h"
29
30 /* low-level specific */
31 #include "mac_sleep.h"
32 #include "mac_radio.h"
33 #include "mac_tx.h"
34 #include "mac_rx.h"
35 #include "mac_rx_onoff.h"
36
37 /* target specific */
38 #include "mac_radio_defs.h"
\ In segment SFR_AN, at 0xbe
\ unsigned char volatile __sfr SLEEP
\ SLEEP:
\ 000000 DS 1
\ In segment SFR_AN, at 0xc3
\ unsigned char volatile __sfr T2CNF
\ T2CNF:
\ 000000 DS 1
39
40 /* debug */
41 #include "mac_assert.h"
42
43
44 /* ------------------------------------------------------------------------------------------------
45 * Global Variables
46 * ------------------------------------------------------------------------------------------------
47 */
\ In segment XDATA_I, align 1, keep-with-next
48 uint8 macSleepState = MAC_SLEEP_STATE_RADIO_OFF;
\ macSleepState:
\ 000000 DS 1
\ 000001 REQUIRE `?<Initializer for macSleepState>`
\ 000001 REQUIRE __INIT_XDATA_I
49
50
51 /**************************************************************************************************
52 * @fn macSleepWakeUp
53 *
54 * @brief Wake up the radio from sleep mode.
55 *
56 * @param none
57 *
58 * @return none
59 **************************************************************************************************
60 */
\ In segment BANKED_CODE, align 1, keep-with-next
61 void macSleepWakeUp(void)
\ macSleepWakeUp:
62 {
\ 000000 C082 PUSH DPL
\ 000002 C083 PUSH DPH
\ 000004 ; Saved register size: 2
\ 000004 ; Auto size: 0
63 /* don't wake up radio if it's already awake */
64 if (macSleepState == MAC_SLEEP_STATE_AWAKE)
\ 000004 90.... MOV DPTR,#macSleepState
\ 000007 E0 MOVX A,@DPTR
\ 000008 603D JZ ??macSleepWakeUp_0
65 {
66 return;
67 }
68
69 /* wake up MAC timer */
70 MAC_RADIO_TIMER_WAKE_UP();
\ 00000A 43C301 ORL 0xc3,#0x1
\ ??macSleepWakeUp_1:
\ 00000D E5C3 MOV A,0xc3
\ 00000F A2E0 MOV C,0xE0 /* A */.0
\ 000011 50FA JNC ??macSleepWakeUp_1
71
72 /* if radio was completely off, restore from that state first */
73 if (macSleepState == MAC_SLEEP_STATE_RADIO_OFF)
\ 000013 E0 MOVX A,@DPTR
\ 000014 6402 XRL A,#0x2
\ 000016 7014 JNZ ??macSleepWakeUp_2
74 {
75 /* turn on radio power */
76 MAC_RADIO_TURN_ON_POWER();
\ 000018 90DF17 MOV DPTR,#-0x20e9
\ 00001B E0 MOVX A,@DPTR
\ 00001C C2E3 CLR 0xE0 /* A */.3
\ 00001E F0 MOVX @DPTR,A
\ ??macSleepWakeUp_3:
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -