📄 uart.fit.rpt
字号:
; Global clocks ; 3 / 4 ( 75 % ) ;
; LAB clocks ; 22 / 72 ( 30 % ) ;
; LUT chains ; 24 / 1,143 ( 2 % ) ;
; Local interconnects ; 256 / 3,938 ( 6 % ) ;
; R4s ; 88 / 2,832 ( 3 % ) ;
+----------------------------+---------------------+
+---------------------------------------------------------------------------+
; LAB Logic Elements ;
+--------------------------------------------+------------------------------+
; Number of Logic Elements (Average = 6.72) ; Number of LABs (Total = 29) ;
+--------------------------------------------+------------------------------+
; 1 ; 6 ;
; 2 ; 0 ;
; 3 ; 3 ;
; 4 ; 2 ;
; 5 ; 0 ;
; 6 ; 0 ;
; 7 ; 1 ;
; 8 ; 2 ;
; 9 ; 1 ;
; 10 ; 14 ;
+--------------------------------------------+------------------------------+
+-------------------------------------------------------------------+
; LAB-wide Signals ;
+------------------------------------+------------------------------+
; LAB-wide Signals (Average = 2.00) ; Number of LABs (Total = 29) ;
+------------------------------------+------------------------------+
; 1 Async. clear ; 22 ;
; 1 Clock ; 22 ;
; 1 Clock enable ; 12 ;
; 1 Sync. clear ; 1 ;
; 2 Clock enables ; 1 ;
+------------------------------------+------------------------------+
+----------------------------------------------------------------------------+
; LAB Signals Sourced ;
+---------------------------------------------+------------------------------+
; Number of Signals Sourced (Average = 7.31) ; Number of LABs (Total = 29) ;
+---------------------------------------------+------------------------------+
; 0 ; 0 ;
; 1 ; 5 ;
; 2 ; 1 ;
; 3 ; 3 ;
; 4 ; 1 ;
; 5 ; 1 ;
; 6 ; 0 ;
; 7 ; 1 ;
; 8 ; 2 ;
; 9 ; 1 ;
; 10 ; 7 ;
; 11 ; 4 ;
; 12 ; 1 ;
; 13 ; 1 ;
; 14 ; 0 ;
; 15 ; 0 ;
; 16 ; 1 ;
+---------------------------------------------+------------------------------+
+--------------------------------------------------------------------------------+
; LAB Signals Sourced Out ;
+-------------------------------------------------+------------------------------+
; Number of Signals Sourced Out (Average = 5.34) ; Number of LABs (Total = 29) ;
+-------------------------------------------------+------------------------------+
; 0 ; 0 ;
; 1 ; 5 ;
; 2 ; 3 ;
; 3 ; 3 ;
; 4 ; 4 ;
; 5 ; 1 ;
; 6 ; 2 ;
; 7 ; 1 ;
; 8 ; 3 ;
; 9 ; 2 ;
; 10 ; 3 ;
; 11 ; 1 ;
; 12 ; 1 ;
+-------------------------------------------------+------------------------------+
+----------------------------------------------------------------------------+
; LAB Distinct Inputs ;
+---------------------------------------------+------------------------------+
; Number of Distinct Inputs (Average = 9.48) ; Number of LABs (Total = 29) ;
+---------------------------------------------+------------------------------+
; 0 ; 0 ;
; 1 ; 0 ;
; 2 ; 0 ;
; 3 ; 2 ;
; 4 ; 5 ;
; 5 ; 0 ;
; 6 ; 1 ;
; 7 ; 4 ;
; 8 ; 3 ;
; 9 ; 0 ;
; 10 ; 3 ;
; 11 ; 2 ;
; 12 ; 2 ;
; 13 ; 0 ;
; 14 ; 1 ;
; 15 ; 1 ;
; 16 ; 0 ;
; 17 ; 4 ;
; 18 ; 1 ;
+---------------------------------------------+------------------------------+
+-----------------+
; Fitter Messages ;
+-----------------+
Info: *******************************************************************
Info: Running Quartus II Fitter
Info: Version 5.0 Build 148 04/26/2005 SJ Full Version
Info: Processing started: Sat Feb 18 12:32:09 2006
Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off UART -c UART
Info: Selected device EPM1270T144C5 for design "UART"
Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time
Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices.
Info: Device EPM570T144C5 is compatible
Info: Device EPM570T144I5 is compatible
Info: Device EPM1270T144I5 is compatible
Info: Device EPM1270T144C5ES is compatible
Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements
Info: Assuming a global fmax requirement of 1000 MHz
Info: Assuming a global tsu requirement of 2.0 ns
Info: Assuming a global tco requirement of 1.0 ns
Info: Assuming a global tpd requirement of 1.0 ns
Info: Performing register packing on registers with non-logic cell location assignments
Info: Completed register packing on registers with non-logic cell location assignments
Info: Completed User Assigned Global Signals Promotion Operation
Info: Automatically promoted signal "clk" to use Global clock
Info: Pin "clk" drives global clock, but is not placed in a dedicated clock pin position
Info: Automatically promoted some destinations of signal "clkbaud8x" to use Global clock
Info: Destination "clkbaud8x" may be non-global or may not use global clock
Info: Automatically promoted signal "rst" to use Global clock
Info: Pin "rst" drives global clock, but is not placed in a dedicated clock pin position
Info: Completed Auto Global Promotion Operation
Info: Starting register packing
Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option
Info: Moving registers into LUTs to improve timing and density
Info: Started processing fast register assignments
Info: Finished processing fast register assignments
Info: Finished moving registers into LUTs
Info: Finished register packing
Info: Fitter placement preparation operations beginning
Info: Fitter placement preparation operations ending: elapsed time is 00:00:00
Info: Fitter placement operations beginning
Info: Fitter placement was successful
Info: Estimated most critical path is register to pin delay of 9.858 ns
Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X14_Y9; Fanout = 12; REG Node = 'rxd_buf[4]'
Info: 2: + IC(0.696 ns) + CELL(0.740 ns) = 1.436 ns; Loc. = LAB_X14_Y9; Fanout = 2; COMB Node = 'reduce_or~2714'
Info: 3: + IC(0.519 ns) + CELL(0.740 ns) = 2.695 ns; Loc. = LAB_X14_Y9; Fanout = 1; COMB Node = 'reduce_or~2716'
Info: 4: + IC(0.672 ns) + CELL(0.511 ns) = 3.878 ns; Loc. = LAB_X14_Y9; Fanout = 1; COMB Node = 'reduce_or~2718'
Info: 5: + IC(0.345 ns) + CELL(0.914 ns) = 5.137 ns; Loc. = LAB_X14_Y9; Fanout = 1; COMB Node = 'reduce_or~2719'
Info: 6: + IC(2.399 ns) + CELL(2.322 ns) = 9.858 ns; Loc. = PIN_119; Fanout = 0; PIN Node = 'seg_data[1]'
Info: Total cell delay = 5.227 ns ( 53.02 % )
Info: Total interconnect delay = 4.631 ns ( 46.98 % )
Info: Fitter placement operations ending: elapsed time is 00:00:01
Info: Fitter routing operations beginning
Info: Average interconnect usage is 3% of the available device resources. Peak interconnect usage is 5%.
Info: Fitter routing operations ending: elapsed time is 00:00:01
Info: Fitter performed an Auto Fit compilation. No optimizations were skipped because the design's timing and/or routability requirements required full optimization
Info: Quartus II Fitter was successful. 0 errors, 0 warnings
Info: Processing ended: Sat Feb 18 12:32:17 2006
Info: Elapsed time: 00:00:08
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -