mt_nwk.lst
来自「CC2430上开关控制灯和温度传感器采集两个例子」· LST 代码 · 共 837 行 · 第 1/3 页
LST
837 行
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 08/Mar/2009 09:09:31 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Component #
# s\mt\MT_NWK.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proje #
# cts\zstack\Samples\SimpleApp\CC2430DB\..\..\..\To #
# ols\CC2430DB\f8wCoord.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_CFG_APP_PENDING_QUEUE=TRUE #
# -DZDO_COORDINATOR -DRTR_NWK -DBLINK_LEDS #
# "-DCONST=const __code" -DGENERIC=__generic) -f #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\SimpleApp\CC2430DB\..\..\..\Tools #
# \CC2430DB\f8wConfig.cfg" (-DSECURE=0 #
# -DDEFAULT_CHANLIST=0x00000800 #
# -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\Source\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\SimpleApp\CC2430DB\..\..\..\ZMain #
# \TI2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mt\" -I "C:\Texas Instruments\ZStack-1.4.2-1.1. #
# 0\Projects\zstack\Samples\SimpleApp\CC2430DB\..\. #
# .\..\..\..\Components\hal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\hal\target\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mac\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mac\low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mac\low_level\srf03\single_chip\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\osal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\services\saddr\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\services\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\af\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\sapi\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\sec\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\zdo\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\zmac\" -D CC2430DB -D HOLD_AUTO_START -D #
# SOFT_START -D REFLECTOR -D NV_INIT -D #
# xNV_RESTORE -D xZTOOL_P2 -D xMT_TASK -D #
# xMT_SAPI_FUNC -D xMT_SAPI_CB_FUNC -lC "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\SimpleControllerDB\List\ #
# " -lA "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Pr #
# ojects\zstack\Samples\SimpleApp\CC2430DB\SimpleCo #
# ntrollerDB\List\" --diag_suppress Pe001,Pa010 #
# --diag_remark pe550 -o "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\SimpleControllerDB\Obj\" #
# -e --require_prototypes -z9 --no_code_motion #
# --debug --core=plain --dptr=16,1 #
# --data_model=large --code_model=banked #
# --calling_convention=xdata_reentrant #
# --place_constants=data --nr_virtual_regs 8 #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Componen #
# ts\mt\MT_NWK.c" #
# List file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\SimpleApp\CC2430DB\SimpleControlle #
# rDB\List\MT_NWK.lst #
# Object file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\SimpleApp\CC2430DB\SimpleControlle #
# rDB\Obj\MT_NWK.r51 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2-1.1.0\Components\mt\MT_NWK.c
1 /*********************************************************************
2 Filename: MT_NWK.c
3 Revised: $Date: 2007-05-03 14:52:32 -0700 (Thu, 03 May 2007) $
4 Revision: $Revision: 14191 $
5
6 Description:
7
8 MonitorTest functions for the NWK layer.
9
10 Notes:
11
12 Copyright (c) 2006 by Texas Instruments, Inc.
13 All Rights Reserved. Permission to use, reproduce, copy, prepare
14 derivative works, modify, distribute, perform, display or sell this
15 software and/or its documentation for any purpose is prohibited
16 without the express written consent of Texas Instruments, Inc.
17 *********************************************************************/
18
19
20
21 /*********************************************************************
22 * INCLUDES
23 */
24 #include "ZComDef.h"
25 #include "OSAL.h"
26 #include "MTEL.h"
27 #include "NLMEDE.h"
28 #include "nwk.h"
29 #include "ZDApp.h"
30 #include "nwk_globals.h"
31 #include "MT_NWK.h"
32
33 #if !defined( WIN32 )
34 #include "OnBoard.h"
35 #endif
36
37 /*********************************************************************
38 * MACROS
39 */
40
41 /*********************************************************************
42 * CONSTANTS
43 */
44
45 /*********************************************************************
46 * TYPEDEFS
47 */
48
49 /*********************************************************************
50 * GLOBAL VARIABLES
51 */
\ In segment XDATA_Z, align 1, keep-with-next
\ 000000 REQUIRE __INIT_XDATA_Z
52 uint16 _nwkCallbackSub;
\ _nwkCallbackSub:
\ 000000 DS 2
53
54 /*********************************************************************
55 * EXTERNAL VARIABLES
56 */
57
58 /*********************************************************************
59 * EXTERNAL FUNCTIONS
60 */
61
62 /*********************************************************************
63 * LOCAL VARIABLES
64 */
65
66 /*********************************************************************
67 * LOCAL FUNCTIONS
68 */
69 #if defined ( MT_NWK_FUNC ) //NWK commands
70 uint8 MT_Nwk_DataRequest( uint16 dstAddr, uint8 nsduLen, uint8* nsdu,
71 uint8 nsduHandle, uint16 nsduHandleOptions,
72 uint8 secure, uint8 discoverRoute,
73 uint8 radius);
74
75 uint8 MT_Nwk_DataRequest( uint16 dstAddr, uint8 nsduLen, uint8* nsdu,
76 uint8 nsduHandle, uint16 nsduHandleOptions,
77 uint8 secure, uint8 discoverRoute,
78 uint8 radius)
79 {
80 uint8 status;
81 NLDE_DataReqAlloc_t dra;
82 NLDE_DataReq_t* req;
83
84
85 dra.overhead = sizeof(NLDE_DataReq_t);
86 dra.nsduLen = nsduLen;
87 dra.secure = secure;
88
89 req = NLDE_DataReqAlloc(&dra);
90
91 if ( req != NULL )
92 {
93 osal_memcpy(req->nfd.nsdu, nsdu, nsduLen);
94
95 req->nfd.dstAddr = dstAddr;
96 req->nfd.nsduHandleOptions = nsduHandleOptions;
97 req->nfd.discoverRoute = discoverRoute;
98 req->nfd.radius = radius;
99
100 status = NLDE_DataReq( req );
101 }
102 else
103 {
104 status = ZMemError;
105 }
106
107 return status;
108 }
109 #endif // defined ( MT_NWK_FUNC )
110
111 /*********************************************************************
112 * @fn MT_NwkCommandProcessing
113 *
114 * @brief
115 *
116 * Process all the NWK commands that are issued by test tool
117 *
118 * @param cmd_id - Command ID
119 * @param len - Length of received SPI data message
120 * @param pData - pointer to received SPI data message
121 *
122 * @return void
123 */
\ In segment BANKED_CODE, align 1, keep-with-next
124 void MT_NwkCommandProcessing( uint16 cmd_id , byte len , byte *pData )
\ MT_NwkCommandProcessing:
125 {
\ 000000 74F6 MOV A,#-0xa
\ 000002 12.... LCALL ?BANKED_ENTER_XDATA
\ 000005 ; Saved register size: 10
\ 000005 ; Auto size: 0
126 byte ret;
127 #if defined ( MT_NWK_FUNC )
128 uint8 dummyExPANID[Z_EXTADDR_LEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
129 uint16 dstAddr;
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?