zdprofile.lst
来自「CC2430上开关控制灯和温度传感器采集两个例子」· LST 代码 · 共 1,248 行 · 第 1/5 页
LST
1,248 行
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 08/Mar/2009 09:09:38 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Component #
# s\stack\zdo\ZDProfile.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proje #
# cts\zstack\Samples\SimpleApp\CC2430DB\..\..\..\To #
# ols\CC2430DB\f8wCoord.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_CFG_APP_PENDING_QUEUE=TRUE #
# -DZDO_COORDINATOR -DRTR_NWK -DBLINK_LEDS #
# "-DCONST=const __code" -DGENERIC=__generic) -f #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\SimpleApp\CC2430DB\..\..\..\Tools #
# \CC2430DB\f8wConfig.cfg" (-DSECURE=0 #
# -DDEFAULT_CHANLIST=0x00000800 #
# -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\Source\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\SimpleApp\CC2430DB\..\..\..\ZMain #
# \TI2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mt\" -I "C:\Texas Instruments\ZStack-1.4.2-1.1. #
# 0\Projects\zstack\Samples\SimpleApp\CC2430DB\..\. #
# .\..\..\..\Components\hal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\hal\target\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mac\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mac\low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\mac\low_level\srf03\single_chip\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\osal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\services\saddr\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\services\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\af\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\sapi\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\sec\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\stack\zdo\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
# s\zmac\" -D CC2430DB -D HOLD_AUTO_START -D #
# SOFT_START -D REFLECTOR -D NV_INIT -D #
# xNV_RESTORE -D xZTOOL_P2 -D xMT_TASK -D #
# xMT_SAPI_FUNC -D xMT_SAPI_CB_FUNC -lC "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\SimpleControllerDB\List\ #
# " -lA "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Pr #
# ojects\zstack\Samples\SimpleApp\CC2430DB\SimpleCo #
# ntrollerDB\List\" --diag_suppress Pe001,Pa010 #
# --diag_remark pe550 -o "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\SimpleApp\CC2430DB\SimpleControllerDB\Obj\" #
# -e --require_prototypes -z9 --no_code_motion #
# --debug --core=plain --dptr=16,1 #
# --data_model=large --code_model=banked #
# --calling_convention=xdata_reentrant #
# --place_constants=data --nr_virtual_regs 8 #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Componen #
# ts\stack\zdo\ZDProfile.c" #
# List file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\SimpleApp\CC2430DB\SimpleControlle #
# rDB\List\ZDProfile.lst #
# Object file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\SimpleApp\CC2430DB\SimpleControlle #
# rDB\Obj\ZDProfile.r51 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2-1.1.0\Components\stack\zdo\ZDProfile.c
1 /*********************************************************************
2 Filename: ZDProfile.c
3 Revised: $Date: 2007-05-14 17:34:18 -0700 (Mon, 14 May 2007) $
4 Revision: $Revision: 14296 $
5
6 Description:
7
8 This Zigbee Device Profile.
9
10 Notes:
11
12 Copyright (c) 2006 by Texas Instruments, Inc.
13 All Rights Reserved. Permission to use, reproduce, copy, prepare
14 derivative works, modify, distribute, perform, display or sell this
15 software and/or its documentation for any purpose is prohibited
16 without the express written consent of Texas Instruments, Inc.
17 *********************************************************************/
18
19 /*********************************************************************
20 * INCLUDES
21 */
22 #include "ZComdef.h"
23 #include "OSAL.h"
24 #include "AF.h"
25 #include "NLMEDE.h"
26 #include "nwk_util.h"
27 #include "APS.h"
28
29 #include "ZDCache.h"
30 #include "ZDConfig.h"
31 #include "ZDProfile.h"
32 #include "ZDObject.h"
33
34 #if defined( LCD_SUPPORTED )
35 #include "OnBoard.h"
36 #endif
37
38 #include "nwk_util.h"
39
40 /*********************************************************************
41 * MACROS
42 */
43
44 #define ZADDR_TO_AFADDR( pZADDR, AFADDR ) { \
45 (AFADDR).endPoint = ZDP_AF_ENDPOINT; \
46 (AFADDR).addrMode = (afAddrMode_t)(pZADDR)->addrMode; \
47 (AFADDR).addr.shortAddr = (pZADDR)->addr.shortAddr; \
48 }
49
50 #define FillAndSendBuffer( TRANSSEQ, ADDR, ID, LEN, BUF ) { \
51 afStatus_t stat; \
52 ZDP_TmpBuf = (BUF)+1; \
53 stat = fillAndSend( (TRANSSEQ), (ADDR), (ID), (LEN) ); \
54 ZDP_TmpBuf = ZDP_Buf+1; \
55 return stat; \
56 }
57
58 #define FillAndSendTxOptions( TRANSSEQ, ADDR, ID, LEN, TxO ) { \
59 afStatus_t stat; \
60 ZDP_TxOptions = (TxO); \
61 stat = fillAndSend( (TRANSSEQ), (ADDR), (ID), (LEN) ); \
62 ZDP_TxOptions = AF_TX_OPTIONS_NONE; \
63 return stat; \
64 }
65
66 /*********************************************************************
67 * CONSTANTS
68 */
69
70 #define ZDP_BUF_SZ 80
71
\ In segment CODE_C, align 1
72 CONST byte ZDP_AF_ENDPOINT = 0;
\ ZDP_AF_ENDPOINT:
\ 000000 00 DB 0
73
74 /*********************************************************************
75 * TYPEDEFS
76 */
77
78 /*********************************************************************
79 * GLOBAL VARIABLES
80 */
81
\ In segment XDATA_Z, align 1, keep-with-next
\ 000000 REQUIRE __INIT_XDATA_Z
82 byte ZDP_TransID = 0;
\ ZDP_TransID:
\ 000000 DS 1
83
84 /*********************************************************************
85 * EXTERNAL VARIABLES
86 */
87
88 extern endPointDesc_t ZDApp_epDesc;
89
90 /*********************************************************************
91 * EXTERNAL FUNCTIONS
92 */
93
94 /*********************************************************************
95 * LOCAL FUNCTIONS
96 */
97
98 static afStatus_t fillAndSend( uint8 *transSeq, zAddrType_t *addr, cId_t clusterID, byte len );
99
100 /*********************************************************************
101 * LOCAL VARIABLES
102 */
103
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?