📄 mt_sapi.s51
字号:
// 93
// 94 case SPI_CMD_SAPI_START_REQ:
// 95 zb_StartRequest();
// 96 break;
// 97
// 98 case SPI_CMD_SAPI_BIND_DEVICE:
// 99 MT_ReverseBytes( &pData[3], Z_EXTADDR_LEN );
// 100 for ( i = 0; i < Z_EXTADDR_LEN ; i++ )
// 101 {
// 102 if ( pData[3+i] != 0x00 )
// 103 {
// 104 // Not a null destination address
// 105 break;
// 106 }
// 107 }
// 108 if ( i == Z_EXTADDR_LEN )
// 109 {
// 110 zb_BindDevice(pData[0], BUILD_UINT16(pData[2], pData[1]), (uint8 *)NULL);
// 111 }
// 112 else
// 113 {
// 114 zb_BindDevice(pData[0], BUILD_UINT16(pData[2], pData[1]), &pData[3]);
// 115 }
// 116 break;
// 117
// 118 case SPI_CMD_SAPI_ALLOW_BIND:
// 119 zb_AllowBind( pData[0]);
// 120 break;
// 121
// 122 case SPI_CMD_SAPI_SEND_DATA:
// 123 zb_SendDataRequest(BUILD_UINT16(pData[1], pData[0]), BUILD_UINT16(pData[3], pData[2]),
// 124 pData[4], &pData[8], pData[5], pData[6], pData[7]);
// 125 break;
// 126
// 127 case SPI_CMD_SAPI_READ_CFG:
// 128 i = (uint8)osal_nv_item_len( pData[0] );
// 129 pBuf = osal_mem_alloc(i+3);
// 130 if (pBuf)
// 131 {
// 132 pBuf[1] = pData[0]; // configId
// 133 pBuf[2] = i; // len
// 134 if ( i )
// 135 ret = zb_ReadConfiguration(pData[0], i, pBuf+3);
// 136 else
// 137 ret = ZInvalidParameter;
// 138 pBuf[0] = ret; // status
// 139 MT_BuildAndSendZToolCB( SPI_CB_SAPI_READ_CFG_RSP, i+3, pBuf );
// 140 osal_mem_free(pBuf);
// 141 }
// 142 ret = 0xff; // Disable return spi message
// 143 break;
// 144
// 145 case SPI_CMD_SAPI_WRITE_CFG:
// 146 ret = zb_WriteConfiguration(pData[0], pData[1], &pData[2]);
// 147 break;
// 148
// 149 case SPI_CMD_SAPI_GET_DEV_INFO:
// 150 pBuf = osal_mem_alloc(Z_EXTADDR_LEN+1);
// 151 if (pBuf)
// 152 {
// 153 zb_GetDeviceInfo(pData[0], pBuf+1);
// 154 pBuf[0] = pData[0];
// 155 MT_BuildAndSendZToolCB( SPI_CB_SAPI_DEV_INFO_RSP, Z_EXTADDR_LEN+1, pBuf );
// 156 osal_mem_free(pBuf);
// 157 }
// 158 ret = 0xff; // Disable return spi message
// 159 break;
// 160
// 161 case SPI_CMD_SAPI_FIND_DEV:
// 162 // Currently only supports IEEE search
// 163 MT_ReverseBytes( pData, Z_EXTADDR_LEN );
// 164 zb_FindDeviceRequest(ZB_IEEE_SEARCH, pData);
// 165 break;
// 166
// 167 case SPI_CMD_SAPI_PMT_JOIN:
// 168 ret = zb_PermitJoiningRequest( BUILD_UINT16( pData[1], pData[0] ), pData[2] );
// 169 break;
// 170
// 171 default:
// 172 break;
// 173 }
// 174
// 175 return ret;
// 176 }
// 177 #endif // #if defined ( MT_SAPI_FUNC )
// 178
// 179 #if defined ( MT_SAPI_CB_FUNC )
// 180
// 181 /******************************************************************************
// 182 * @fn zb_MTCallbackStartConfirm
// 183 *
// 184 * @brief Process the callback subscription for zb_StartConfirm
// 185 *
// 186 * @param
// 187 *
// 188 * @return none
// 189 */
// 190 void zb_MTCallbackStartConfirm( uint8 status )
// 191 {
// 192 uint8 memPtr[SPI_CB_SAPI_START_CNF_LEN];
// 193
// 194 memPtr[0] = status;
// 195
// 196 #if defined (ZTOOL_P1) || defined (ZTOOL_P2)
// 197 MT_BuildAndSendZToolCB( SPI_CB_SAPI_START_CNF, SPI_CB_SAPI_START_CNF_LEN, memPtr );
// 198 #endif
// 199 }
// 200
// 201 /******************************************************************************
// 202 * @fn zb_MTCallbackSendDataConfirm
// 203 *
// 204 * @brief Process the callback subscription for zb_SendDataConfirm
// 205 *
// 206 * @param
// 207 *
// 208 * @return none
// 209 */
// 210 void zb_MTCallbackSendDataConfirm( uint8 handle, uint8 status )
// 211 {
// 212 uint8 memPtr[SPI_CB_SAPI_SEND_DATA_CNF_LEN];
// 213
// 214 memPtr[0] = handle;
// 215 memPtr[1] = status;
// 216
// 217 #if defined (ZTOOL_P1) || defined (ZTOOL_P2)
// 218 MT_BuildAndSendZToolCB( SPI_CB_SAPI_SEND_DATA_CNF, SPI_CB_SAPI_SEND_DATA_CNF_LEN, memPtr );
// 219 #endif
// 220 }
// 221
// 222 /******************************************************************************
// 223 * @fn zb_MTCallbackBindConfirm
// 224 *
// 225 * @brief Process the callback subscription for zb_BindConfirm
// 226 *
// 227 * @param
// 228 *
// 229 * @return none
// 230 */
// 231 void zb_MTCallbackBindConfirm( uint16 commandId, uint8 status )
// 232 {
// 233 uint8 memPtr[SPI_CB_SAPI_BIND_CNF_LEN];
// 234
// 235 memPtr[0] = HI_UINT16(commandId);
// 236 memPtr[1] = LO_UINT16(commandId);
// 237 memPtr[2] = status;
// 238
// 239 #if defined (ZTOOL_P1) || defined (ZTOOL_P2)
// 240 MT_BuildAndSendZToolCB( SPI_CB_SAPI_BIND_CNF, SPI_CB_SAPI_BIND_CNF_LEN, memPtr );
// 241 #endif
// 242 }
// 243 /******************************************************************************
// 244 * @fn zb_MTCallbackAllowBindConfirm
// 245 *
// 246 * @brief Indicates when another device attempted to bind to this device
// 247 *
// 248 * @param
// 249 *
// 250 * @return none
// 251 */
// 252 void zb_MTCallbackAllowBindConfirm( uint16 source )
// 253 {
// 254 uint8 memPtr[SPI_CB_SAPI_ALLOW_BIND_CNF_LEN];
// 255
// 256 memPtr[0] = HI_UINT16(source);
// 257 memPtr[1] = LO_UINT16(source);
// 258
// 259 #if defined (ZTOOL_P1) || defined (ZTOOL_P2)
// 260 MT_BuildAndSendZToolCB( SPI_CB_SAPI_ALLOW_BIND_CNF, SPI_CB_SAPI_ALLOW_BIND_CNF_LEN, memPtr );
// 261 #endif
// 262
// 263 }
// 264 /******************************************************************************
// 265 * @fn zb_MTCallbackFindDeviceConfirm
// 266 *
// 267 * @brief Process the callback subscription for zb_FindDeviceConfirm
// 268 *
// 269 * @param
// 270 *
// 271 * @return none
// 272 */
// 273 void zb_MTCallbackFindDeviceConfirm( uint8 searchType, uint8 *searchKey, uint8 *result )
// 274 {
// 275 uint8 memPtr[SPI_CB_SAPI_FIND_DEV_CNF_LEN];
// 276 uint16 addr = *((uint16*)searchKey);
// 277
// 278 // Currently only supports IEEE Addr Search
// 279 memPtr[0] = ZB_IEEE_SEARCH;
// 280 memPtr[1] = HI_UINT16(addr);
// 281 memPtr[2] = LO_UINT16(addr);
// 282 osal_memcpy(&memPtr[3], result, Z_EXTADDR_LEN);
// 283 MT_ReverseBytes( &memPtr[3], Z_EXTADDR_LEN );
// 284
// 285 #if defined (ZTOOL_P1) || defined (ZTOOL_P2)
// 286 MT_BuildAndSendZToolCB( SPI_CB_SAPI_FIND_DEV_CNF, SPI_CB_SAPI_FIND_DEV_CNF_LEN, memPtr );
// 287 #endif
// 288 }
// 289
// 290 /******************************************************************************
// 291 * @fn zb_MTCallbackReceiveDataIndication
// 292 *
// 293 * @brief Process the callback subscription for zb_ReceiveDataIndication
// 294 *
// 295 * @param
// 296 *
// 297 * @return none
// 298 */
// 299 void zb_MTCallbackReceiveDataIndication( uint16 source, uint16 command, uint16 len, uint8 *pData )
// 300 {
// 301 uint8 *memPtr;
// 302 int8 i;
// 303 uint8 msgLen = SPI_CB_SAPI_RCV_DATA_IND_LEN + len;
// 304
// 305 memPtr = osal_mem_alloc(msgLen);
// 306
// 307 if (memPtr)
// 308 {
// 309 memPtr[0] = HI_UINT16(source);
// 310 memPtr[1] = LO_UINT16(source);
// 311 memPtr[2] = HI_UINT16(command);
// 312 memPtr[3] = LO_UINT16(command);
// 313 memPtr[4] = HI_UINT16(len);
// 314 memPtr[5] = LO_UINT16(len);
// 315
// 316 for (i=0; i<len; i++)
// 317 {
// 318 memPtr[6+i] = pData[i];
// 319 }
// 320
// 321 #if defined (ZTOOL_P1) || defined (ZTOOL_P2)
// 322 MT_BuildAndSendZToolCB( SPI_CB_SAPI_RCV_DATA_IND, msgLen, memPtr );
// 323 #endif
// 324 osal_mem_free( memPtr );
// 325 }
// 326 }
// 327
// 328 #endif // #if defined ( MT_SAPI_CB_FUNC )
// 329
// 330 /*********************************************************************
// 331 *********************************************************************/
//
//
// 0 bytes of memory
//
//Errors: none
//Warnings: none
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -