hal_dma.lst

CC2430上开关控制灯和温度传感器采集两个例子

##############################################################################
#                                                                            #
# IAR 8051 C/C++ Compiler V7.20H/W32                   08/Mar/2009  09:09:38 #
# Copyright 2004-2006 IAR Systems. All rights reserved.                      #
#                                                                            #
#    Core               =  plain                                             #
#    Code model         =  banked                                            #
#    Data model         =  large                                             #
#    Calling convention =  xdata reentrant                                   #
#    Constant location  =  data                                              #
#    Dptr setup         =  1,16                                              #
#    Source file        =  C:\Texas Instruments\ZStack-1.4.2-1.1.0\Component #
#                          s\hal\target\CC2430DB\hal_dma.c                   #
#    Command line       =  -f "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proje #
#                          cts\zstack\Samples\SimpleApp\CC2430DB\..\..\..\To #
#                          ols\CC2430DB\f8wCoord.cfg" (-DCPU32MHZ            #
#                          -DFORCE_MAC_NEAR -DROOT=__near_func               #
#                          -DMAC_CFG_APP_PENDING_QUEUE=TRUE                  #
#                          -DZDO_COORDINATOR -DRTR_NWK -DBLINK_LEDS          #
#                          "-DCONST=const __code" -DGENERIC=__generic) -f    #
#                          "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
#                          \zstack\Samples\SimpleApp\CC2430DB\..\..\..\Tools #
#                          \CC2430DB\f8wConfig.cfg" (-DSECURE=0              #
#                          -DDEFAULT_CHANLIST=0x00000800                     #
#                          -DZDAPP_CONFIG_PAN_ID=0xFFFF                      #
#                          -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
#                          ASK=0x007F -DBEACON_REQUEST_DELAY=100             #
#                          -DBEACON_REQ_DELAY_MASK=0x00FF                    #
#                          -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
#                          OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7           #
#                          -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3  #
#                          -DNWK_MAX_DATA_RETRIES=2                          #
#                          -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9        #
#                          -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20          #
#                          -DNWK_MAX_BINDING_ENTRIES=10                      #
#                          -DMAX_BINDING_CLUSTER_IDS=5                       #
#                          "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09,     #
#                          0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08,   #
#                          0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE     #
#                          -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100           #
#                          -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440   #
#                          -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR      #
#                          Systems\Embedded Workbench 4.05 Evaluation        #
#                          version\8051\inc\" -I "C:\Program Files\IAR       #
#                          Systems\Embedded Workbench 4.05 Evaluation        #
#                          version\8051\inc\clib\" -I "C:\Texas              #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\" -I "C:\Texas           #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\Source\" -I           #
#                          "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
#                          \zstack\Samples\SimpleApp\CC2430DB\..\..\..\ZMain #
#                          \TI2430DB\" -I "C:\Texas                          #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\mt\" -I "C:\Texas Instruments\ZStack-1.4.2-1.1. #
#                          0\Projects\zstack\Samples\SimpleApp\CC2430DB\..\. #
#                          .\..\..\..\Components\hal\include\" -I "C:\Texas  #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\hal\target\CC2430DB\" -I "C:\Texas              #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\mac\include\" -I "C:\Texas                      #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\mac\high_level\" -I "C:\Texas                   #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\mac\low_level\srf03\" -I "C:\Texas              #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\mac\low_level\srf03\single_chip\" -I "C:\Texas  #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\osal\mcu\ccsoc\" -I "C:\Texas                   #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\osal\include\" -I "C:\Texas                     #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\services\saddr\" -I "C:\Texas                   #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\services\sdata\" -I "C:\Texas                   #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\stack\af\" -I "C:\Texas                         #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\stack\nwk\" -I "C:\Texas                        #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\stack\sapi\" -I "C:\Texas                       #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\stack\sec\" -I "C:\Texas                        #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\stack\sys\" -I "C:\Texas                        #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\stack\zdo\" -I "C:\Texas                        #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\zmac\f8w\" -I "C:\Texas                         #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\..\..\..\..\..\Component #
#                          s\zmac\" -D CC2430DB -D HOLD_AUTO_START -D        #
#                          SOFT_START -D REFLECTOR -D NV_INIT -D             #
#                          xNV_RESTORE -D xZTOOL_P2 -D xMT_TASK -D           #
#                          xMT_SAPI_FUNC -D xMT_SAPI_CB_FUNC -lC "C:\Texas   #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\SimpleControllerDB\List\ #
#                          " -lA "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Pr #
#                          ojects\zstack\Samples\SimpleApp\CC2430DB\SimpleCo #
#                          ntrollerDB\List\" --diag_suppress Pe001,Pa010     #
#                          --diag_remark pe550 -o "C:\Texas                  #
#                          Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
#                          mples\SimpleApp\CC2430DB\SimpleControllerDB\Obj\" #
#                           -e --require_prototypes -z9 --no_code_motion     #
#                          --debug --core=plain --dptr=16,1                  #
#                          --data_model=large --code_model=banked            #
#                          --calling_convention=xdata_reentrant              #
#                          --place_constants=data --nr_virtual_regs 8        #
#                          "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Componen #
#                          ts\hal\target\CC2430DB\hal_dma.c"                 #
#    List file          =  C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
#                          zstack\Samples\SimpleApp\CC2430DB\SimpleControlle #
#                          rDB\List\hal_dma.lst                              #
#    Object file        =  C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
#                          zstack\Samples\SimpleApp\CC2430DB\SimpleControlle #
#                          rDB\Obj\hal_dma.r51                               #
#                                                                            #
#                                                                            #
##############################################################################

C:\Texas Instruments\ZStack-1.4.2-1.1.0\Components\hal\target\CC2430DB\hal_dma.c
      1          /******************************************************************************
      2              Filename:       _hal_dma.c
      3              Revised:        $Date: 2007-03-13 14:24:09 -0700 (Tue, 13 Mar 2007) $
      4              Revision:       $Revision: 13747 $
      5          
      6              Description: This file contains the interface to the DMA.