📄 osal_pwrmgr.lst
字号:
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 08/Mar/2009 09:05:00 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Component #
# s\osal\common\OSAL_PwrMgr.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proje #
# cts\zstack\Samples\Location\CC2430DB\..\..\..\Too #
# ls\CC2430DB\f8wEndev.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_OPT_FFD=0 -DBLINK_LEDS "-DCONST=const #
# __code" -DGENERIC=__generic) -f "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\Tools\CC2430DB\f #
# 8wConfig.cfg" (-DSECURE=0 #
# -DDEFAULT_CHANLIST=0x00000800 #
# -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\Source\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\ZMain\TI2430DB\" #
# -I "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proj #
# ects\zstack\Samples\Location\CC2430DB\..\..\..\.. #
# \..\Components\mt\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \hal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \hal\target\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \osal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\af\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\sec\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\zdo\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \zmac\" -I "C:\Texas Instruments\ZStack-1.4.2-1.1 #
# .0\Projects\zstack\Samples\Location\CC2430DB\..\. #
# .\..\..\..\Components\services\saddr\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\Location\CC2430DB\..\..\..\..\..\ #
# Components\services\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\low_level\srf03\single_chip\" -D CC2430DB #
# -D NWK_AUTO_POLL -D POWER_SAVING -D NV_RESTORE #
# -lC "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proj #
# ects\zstack\Samples\Location\CC2430DB\EndDeviceDB #
# \List\" -lA "C:\Texas Instruments\ZStack-1.4.2-1. #
# 1.0\Projects\zstack\Samples\Location\CC2430DB\End #
# DeviceDB\List\" --diag_suppress Pe001,Pa010 #
# --diag_remark pe550 -o "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\EndDeviceDB\Obj\" -e #
# --require_prototypes -z9 --no_code_motion #
# --debug --core=plain --dptr=16,1 #
# --data_model=large --code_model=banked #
# --calling_convention=xdata_reentrant #
# --place_constants=data --nr_virtual_regs 8 #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Componen #
# ts\osal\common\OSAL_PwrMgr.c" #
# List file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\Location\CC2430DB\EndDeviceDB\List #
# \OSAL_PwrMgr.lst #
# Object file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\Location\CC2430DB\EndDeviceDB\Obj\ #
# OSAL_PwrMgr.r51 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2-1.1.0\Components\osal\common\OSAL_PwrMgr.c
1 /*********************************************************************
2 Filename: $RCSfile$
3 Revised: $Date: 2007-02-20 12:44:19 -0800 (Tue, 20 Feb 2007) $
4 Revision: $Revision: 13512 $
5
6 Description:
7
8 This file contains the OSAL Power Management API.
9
10
11 Notes:
12
13 Copyright (c) 2006 by Texas Instruments, Inc.
14 All Rights Reserved. Permission to use, reproduce, copy, prepare
15 derivative works, modify, distribute, perform, display or sell this
16 software and/or its documentation for any purpose is prohibited
17 without the express written consent of Texas Instruments, Inc.
18 *********************************************************************/
19
20
21 /*********************************************************************
22 * INCLUDES
23 */
24
25 #include "ZComDef.h"
26 #include "OnBoard.h"
27 #include "OSAL.h"
28 #include "OSAL_Tasks.h"
29 #include "OSAL_Timers.h"
30 #include "OSAL_PwrMgr.h"
31
32 /*********************************************************************
33 * MACROS
34 */
35
36 /*********************************************************************
37 * CONSTANTS
38 */
39
40 /*********************************************************************
41 * TYPEDEFS
42 */
43
44 /*********************************************************************
45 * GLOBAL VARIABLES
46 */
47
48 /* This global variable stores the power management attributes.
49 */
\ In segment XDATA_Z, align 1, keep-with-next
\ 000000 REQUIRE __INIT_XDATA_Z
50 pwrmgr_attribute_t pwrmgr_attribute;
\ pwrmgr_attribute:
\ 000000 DS 7
51
52 /*********************************************************************
53 * EXTERNAL VARIABLES
54 */
55
56 /*********************************************************************
57 * EXTERNAL FUNCTIONS
58 */
59
60 /*********************************************************************
61 * LOCAL VARIABLES
62 */
63
64 /*********************************************************************
65 * LOCAL FUNCTION PROTOTYPES
66 */
67
68 /*********************************************************************
69 * FUNCTIONS
70 *********************************************************************/
71
72 /*********************************************************************
73 * @fn osal_pwrmgr_init
74 *
75 * @brief Initialize the power management system.
76 *
77 * @param none.
78 *
79 * @return none.
80 */
\ In segment BANKED_CODE, align 1, keep-with-next
81 void osal_pwrmgr_init( void )
\ osal_pwrmgr_init:
82 {
\ 000000 C082 PUSH DPL
\ 000002 C083 PUSH DPH
\ 000004 ; Saved register size: 2
\ 000004 ; Auto size: 0
83 pwrmgr_attribute.pwrmgr_device = PWRMGR_ALWAYS_ON; // Default to no power conservation.
\ 000004 E4 CLR A
\ 000005 90.... MOV DPTR,#(pwrmgr_attribute + 6)
\ 000008 F0 MOVX @DPTR,A
84 pwrmgr_attribute.pwrmgr_task_state = 0; // Cleared. All set to conserve
\ 000009 90.... MOV DPTR,#pwrmgr_attribute
\ 00000C F0 MOVX @DPTR,A
\ 00000D A3 INC DPTR
\ 00000E REQUIRE ?Subroutine0
\ 00000E ; // Fall through to label ?Subroutine0
85 }
\ In segment BANKED_CODE, align 1, keep-with-next
\ ?Subroutine0:
\ 000000 F0 MOVX @DPTR,A
\ 000001 D083 POP DPH
\ 000003 D082 POP DPL
\ 000005 02.... LJMP ?BRET
86
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -