📄 hal_sleep.lst
字号:
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 08/Mar/2009 09:05:05 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Component #
# s\hal\target\CC2430DB\hal_sleep.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proje #
# cts\zstack\Samples\Location\CC2430DB\..\..\..\Too #
# ls\CC2430DB\f8wEndev.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_OPT_FFD=0 -DBLINK_LEDS "-DCONST=const #
# __code" -DGENERIC=__generic) -f "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\Tools\CC2430DB\f #
# 8wConfig.cfg" (-DSECURE=0 #
# -DDEFAULT_CHANLIST=0x00000800 #
# -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\Source\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\ZMain\TI2430DB\" #
# -I "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proj #
# ects\zstack\Samples\Location\CC2430DB\..\..\..\.. #
# \..\Components\mt\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \hal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \hal\target\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \osal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\af\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\sec\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\zdo\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \zmac\" -I "C:\Texas Instruments\ZStack-1.4.2-1.1 #
# .0\Projects\zstack\Samples\Location\CC2430DB\..\. #
# .\..\..\..\Components\services\saddr\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\Location\CC2430DB\..\..\..\..\..\ #
# Components\services\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\low_level\srf03\single_chip\" -D CC2430DB #
# -D NWK_AUTO_POLL -D POWER_SAVING -D NV_RESTORE #
# -lC "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proj #
# ects\zstack\Samples\Location\CC2430DB\EndDeviceDB #
# \List\" -lA "C:\Texas Instruments\ZStack-1.4.2-1. #
# 1.0\Projects\zstack\Samples\Location\CC2430DB\End #
# DeviceDB\List\" --diag_suppress Pe001,Pa010 #
# --diag_remark pe550 -o "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\EndDeviceDB\Obj\" -e #
# --require_prototypes -z9 --no_code_motion #
# --debug --core=plain --dptr=16,1 #
# --data_model=large --code_model=banked #
# --calling_convention=xdata_reentrant #
# --place_constants=data --nr_virtual_regs 8 #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Componen #
# ts\hal\target\CC2430DB\hal_sleep.c" #
# List file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\Location\CC2430DB\EndDeviceDB\List #
# \hal_sleep.lst #
# Object file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\Location\CC2430DB\EndDeviceDB\Obj\ #
# hal_sleep.r51 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2-1.1.0\Components\hal\target\CC2430DB\hal_sleep.c
1 /**************************************************************************************************
2 Filename: hal_sleep.c
3 Revised: $Date: 2007-05-15 15:37:47 -0700 (Tue, 15 May 2007) $
4 Revision: $Revision: 14304 $
5
6 Description:
7
8 This module contains the HAL power management procedures for the CC2430.
9
10
11 Copyright (c) 2006 by Texas Instruments, Inc.
12 All Rights Reserved. Permission to use, reproduce, copy, prepare
13 derivative works, modify, distribute, perform, display or sell this
14 software and/or its documentation for any purpose is prohibited
15 without the express written consent of Texas Instruments, Inc.
16 **************************************************************************************************/
17
18 /* ------------------------------------------------------------------------------------------------
19 * Includes
20 * ------------------------------------------------------------------------------------------------
21 */
22 #include "hal_types.h"
23 #include "hal_mcu.h"
\ In segment SFR_AN, at 0x87
\ unsigned char volatile __sfr PCON
\ PCON:
\ 000000 DS 1
\ In segment SFR_AN, at 0x8f
\ unsigned char volatile __sfr P0INP
\ P0INP:
\ 000000 DS 1
\ In segment SFR_AN, at 0x95
\ unsigned char volatile __sfr ST0
\ ST0:
\ 000000 DS 1
\ In segment SFR_AN, at 0x96
\ unsigned char volatile __sfr ST1
\ ST1:
\ 000000 DS 1
\ In segment SFR_AN, at 0x97
\ unsigned char volatile __sfr ST2
\ ST2:
\ 000000 DS 1
\ In segment SFR_AN, at 0x9a
\ unsigned char volatile __sfr IEN2
\ IEN2:
\ 000000 DS 1
\ In segment SFR_AN, at 0xbe
\ unsigned char volatile __sfr SLEEP
\ SLEEP:
\ 000000 DS 1
\ In segment SFR_AN, at 0xc6
\ unsigned char volatile __sfr CLKCON
\ CLKCON:
\ 000000 DS 1
\ In segment SFR_AN, at 0xfd
\ unsigned char volatile __sfr P0DIR
\ P0DIR:
\ 000000 DS 1
24 #include "hal_board.h"
25 #include "hal_sleep.h"
26 #include "hal_led.h"
27 #include "hal_key.h"
28 #include "mac_api.h"
29 #include "OSAL.h"
30 #include "OSAL_Timers.h"
31 #include "OSAL_Tasks.h"
32 #include "OSAL_PwrMgr.h"
33 #include "OnBoard.h"
34 #include "hal_drivers.h"
35
36 #if !defined (RTR_NWK) && defined (NWK_AUTO_POLL)
37 #include "nwk_globals.h"
38 #include "ZGlobals.h"
39 #endif
40
41 /* ------------------------------------------------------------------------------------------------
42 * Macros
43 * ------------------------------------------------------------------------------------------------
44 */
45
46 /* 32 kHz clock source select in CLKCON */
47 #if !defined (OSC32K_CRYSTAL_INSTALLED) || (defined (OSC32K_CRYSTAL_INSTALLED) && (OSC32K_CRYSTAL_INSTALLED == TRUE))
48 #define OSC_32KHZ 0x00 /* external 32 KHz xosc */
49 #else
50 #define OSC_32KHZ 0x80 /* internal 32 KHz rcosc */
51 #endif
52
53 /* POWER CONSERVATION DEFINITIONS
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -