📄 mac_cfg.lst
字号:
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 08/Mar/2009 09:05:05 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Component #
# s\mac\high_level\mac_cfg.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proje #
# cts\zstack\Samples\Location\CC2430DB\..\..\..\Too #
# ls\CC2430DB\f8wEndev.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_OPT_FFD=0 -DBLINK_LEDS "-DCONST=const #
# __code" -DGENERIC=__generic) -f "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\Tools\CC2430DB\f #
# 8wConfig.cfg" (-DSECURE=0 #
# -DDEFAULT_CHANLIST=0x00000800 #
# -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\Source\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\ZMain\TI2430DB\" #
# -I "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proj #
# ects\zstack\Samples\Location\CC2430DB\..\..\..\.. #
# \..\Components\mt\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \hal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \hal\target\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \osal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\af\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\sec\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \stack\zdo\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \zmac\" -I "C:\Texas Instruments\ZStack-1.4.2-1.1 #
# .0\Projects\zstack\Samples\Location\CC2430DB\..\. #
# .\..\..\..\Components\services\saddr\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\Location\CC2430DB\..\..\..\..\..\ #
# Components\services\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\..\..\..\..\..\Components #
# \mac\low_level\srf03\single_chip\" -D CC2430DB #
# -D NWK_AUTO_POLL -D POWER_SAVING -D NV_RESTORE #
# -lC "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proj #
# ects\zstack\Samples\Location\CC2430DB\EndDeviceDB #
# \List\" -lA "C:\Texas Instruments\ZStack-1.4.2-1. #
# 1.0\Projects\zstack\Samples\Location\CC2430DB\End #
# DeviceDB\List\" --diag_suppress Pe001,Pa010 #
# --diag_remark pe550 -o "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\Location\CC2430DB\EndDeviceDB\Obj\" -e #
# --require_prototypes -z9 --no_code_motion #
# --debug --core=plain --dptr=16,1 #
# --data_model=large --code_model=banked #
# --calling_convention=xdata_reentrant #
# --place_constants=data --nr_virtual_regs 8 #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Componen #
# ts\mac\high_level\mac_cfg.c" #
# List file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\Location\CC2430DB\EndDeviceDB\List #
# \mac_cfg.lst #
# Object file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\Location\CC2430DB\EndDeviceDB\Obj\ #
# mac_cfg.r51 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2-1.1.0\Components\mac\high_level\mac_cfg.c
1 /**************************************************************************************************
2 Filename: mac_cfg.c
3 Revised: $Date: 2006-10-27 16:48:58 -0700 (Fri, 27 Oct 2006) $
4 Revision: $Revision: 12443 $
5
6 Description:
7
8 Compile-time parameters which are configurable by the user.
9
10 Copyright (c) 2006 by Texas Instruments, Inc.
11 All Rights Reserved. Permission to use, reproduce, copy, prepare
12 derivative works, modify, distribute, perform, display or sell this
13 software and/or its documentation for any purpose is prohibited
14 without the express written consent of Texas Instruments, Inc.
15 **************************************************************************************************/
16
17 /* ------------------------------------------------------------------------------------------------
18 * Includes
19 * ------------------------------------------------------------------------------------------------
20 */
21 #include "mac_api.h"
22
23 /* ------------------------------------------------------------------------------------------------
24 * Constants
25 * ------------------------------------------------------------------------------------------------
26 */
27
28 /* maximum number of data frames in transmit queue */
29 #ifndef MAC_CFG_TX_DATA_MAX
30 #define MAC_CFG_TX_DATA_MAX 2
31 #endif
32
33 /* maximum number of frames of all types in transmit queue */
34 #ifndef MAC_CFG_TX_MAX
35 #define MAC_CFG_TX_MAX 5
36 #endif
37
38 /* maximum number of frames in receive queue */
39 #ifndef MAC_CFG_RX_MAX
40 #define MAC_CFG_RX_MAX 2
41 #endif
42
43 /* allocate additional bytes in the data indication for application-defined headers */
44 #ifndef MAC_CFG_DATA_IND_OFFSET
45 #define MAC_CFG_DATA_IND_OFFSET 0
46 #endif
47
48 /* determine whether MAC_MLME_POLL_IND will be sent to the application */
49 #ifndef MAC_CFG_APP_PENDING_QUEUE
50 #define MAC_CFG_APP_PENDING_QUEUE FALSE
51 #endif
52
53 /* ------------------------------------------------------------------------------------------------
54 * Global Variables
55 * ------------------------------------------------------------------------------------------------
56 */
57
58 /* configurable parameters */
\ In segment XDATA_I, align 1, keep-with-next
59 const macCfg_t macCfg =
\ macCfg:
\ 000000 DS 5
\ 000005 REQUIRE `?<Initializer for macCfg>`
\ 000005 REQUIRE __INIT_XDATA_I
\ In segment XDATA_ID, align 1, keep-with-next
\ `?<Initializer for macCfg>`:
\ 000000 02050200 DB 2, 5, 2, 0, 0
\ 00
60 {
61 MAC_CFG_TX_DATA_MAX,
62 MAC_CFG_TX_MAX,
63 MAC_CFG_RX_MAX,
64 MAC_CFG_DATA_IND_OFFSET,
65 MAC_CFG_APP_PENDING_QUEUE
66 };
Segment part sizes:
Function/Label Bytes
-------------- -----
macCfg 5
?<Initializer for macCfg> 5
5 bytes in segment XDATA_I
5 bytes in segment XDATA_ID
5 bytes of CODE memory
5 bytes of XDATA memory
Errors: none
Warnings: none
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -