testdlg.cpp

一个canbus通讯软件源代码

// testDlg.cpp : implementation file
//


#include "stdafx.h"
#include "test.h"
#include "testDlg.h"
//#include "ControlCAN.h"
#include "DialogSetMode.h"
#include "DialogCallTag.h"
#include "DlgPollingMod.h"
#include <afxmt.h> 
typedef unsigned short u16;



#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif









int   sort_function(   const   void   *ca,   const   void   *cb)//const   CReceiveInfo   *a,   const   CReceiveInfo   *b)   
  {   CReceiveInfo *a,*b;
     a=(CReceiveInfo *) ca;
	 b=(CReceiveInfo *)cb;

        if   (a->m_strTagID.GetLength()  !=   b->m_strTagID.GetLength())   
  return   a->m_strTagID.GetLength()  - b->m_strTagID.GetLength();   
        return(  a->m_strTagID.Compare(b->m_strTagID)  );   
  }   
 int   sort_functionID(   const   void   *ca,   const   void   *cb)//const   CReceiveInfo   *a,   const   CReceiveInfo   *b)   
  {   CReceiveInfo *a,*b;
     a=(CReceiveInfo *) ca;
	 b=(CReceiveInfo *)cb;
     
        return(  a->m_dwordReaderID-b->m_dwordReaderID);   
  }   

/////////////////////////////////////////////////////////////////////////////
// CAboutDlg dialog used for App About



class CAboutDlg : public CDialog
{
public:
	CAboutDlg();

// Dialog Data
	//{{AFX_DATA(CAboutDlg)
	enum { IDD = IDD_ABOUTBOX };
	//}}AFX_DATA

	// ClassWizard generated virtual function overrides
	//{{AFX_VIRTUAL(CAboutDlg)
	protected:
	virtual void DoDataExchange(CDataExchange* pDX);    // DDX/DDV support
	//}}AFX_VIRTUAL

// Implementation
protected:
	//{{AFX_MSG(CAboutDlg)
	//}}AFX_MSG
	DECLARE_MESSAGE_MAP()
};

CAboutDlg::CAboutDlg() : CDialog(CAboutDlg::IDD)
{
	//{{AFX_DATA_INIT(CAboutDlg)
	//}}AFX_DATA_INIT
}

void CAboutDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	//{{AFX_DATA_MAP(CAboutDlg)
	//}}AFX_DATA_MAP
}

BEGIN_MESSAGE_MAP(CAboutDlg, CDialog)
	//{{AFX_MSG_MAP(CAboutDlg)
		// No message handlers
	//}}AFX_MSG_MAP
END_MESSAGE_MAP()

/////////////////////////////////////////////////////////////////////////////
// CTestDlg dialog
CCriticalSection critical_section;
CTestDlg::CTestDlg(CWnd* pParent /*=NULL*/)
	: ClxDialog(CTestDlg::IDD, pParent)
{
	//{{AFX_DATA_INIT(CTestDlg)
	m_EditSendFrmID = 0;
	//}}AFX_DATA_INIT
	// Note that LoadIcon does not require a subsequent DestroyIcon in Win32
	m_hIcon = AfxGetApp()->LoadIcon(IDR_MAINFRAME);
	m_connect=0;
	m_cannum=0;
	m_devtype=VCI_PCI5121;
	m_DBCnt=NULL;
}

void CTestDlg::DoDataExchange(CDataExchange* pDX)
{
	ClxDialog::DoDataExchange(pDX);
	//{{AFX_DATA_MAP(CTestDlg)
	DDX_Control(pDX, IDC_COMBO_READERPLUS, m_ctrReaderPlus);
	DDX_Control(pDX, IDC_COMBO_BAUDR, m_ctrBaud);
	DDX_Control(pDX, IDC_LIST_TAGSHOW, m_ctrTagShow);
	DDX_Control(pDX, IDC_COMBO_MODE, m_ComboMode);
	DDX_Control(pDX, IDC_COMBO_CANIND, m_ComboCANInd);
	DDX_Control(pDX, IDC_LIST_INFO, m_ListInfo);
	DDX_Control(pDX, IDC_COMBO_SENDTYPE, m_ComboSendType);
	DDX_Text(pDX, IDC_EDIT_SENDFRAMEID, m_EditSendFrmID);
	DDV_MinMaxDWord(pDX, m_EditSendFrmID, 0, 2000);
	//}}AFX_DATA_MAP
}

BEGIN_MESSAGE_MAP(CTestDlg, ClxDialog)
	//{{AFX_MSG_MAP(CTestDlg)
	ON_WM_SYSCOMMAND()
	ON_WM_PAINT()
	ON_WM_QUERYDRAGICON()
	ON_BN_CLICKED(IDC_BUTTON_CONNECT, OnButtonConnect)
	ON_BN_CLICKED(IDC_BUTTON_STARTCAN, OnButtonStartcan)
	ON_BN_CLICKED(IDC_BUTTON_RESETCAN, OnButtonResetcan)
	ON_BN_CLICKED(IDC_BUTTON_SETMODE, OnButtonSetmode)
	ON_BN_CLICKED(IDC_BUTTON_CALLTAG, OnButtonCalltag)
	ON_BN_CLICKED(IDC_BUTTON_READEDATA, OnButtonReadedata)
	ON_WM_TIMER()
	ON_EN_CHANGE(IDC_EDIT_SENDFRAMEID, OnChangeEditSendframeid)
	ON_BN_CLICKED(IDC_BUTTON_SETPLUS, OnButtonSetplus)
	ON_BN_CLICKED(IDC_BUTTON_GETPLUS, OnButtonGetplus)
	ON_BN_CLICKED(IDC_BUTTON_GETMODE, OnButtonGetmode)
	ON_BN_CLICKED(IDC_BUTTONCLS, OnButtoncls)
	ON_WM_CTLCOLOR()
	ON_NOTIFY(LVN_COLUMNCLICK, IDC_LIST_TAGSHOW, OnColumnclickListTagshow)
	ON_NOTIFY(HDN_ITEMCLICK, IDC_LIST_TAGSHOW, OnItemclickListTagshow)
	ON_NOTIFY(LVN_KEYDOWN, IDC_LIST_TAGSHOW, OnKeydownListTagshow)
	ON_BN_CLICKED(IDC_BUT_IDSET, OnButIdset)
	ON_BN_CLICKED(IDC_BUT_START_POLLING, OnButStartPolling)
	//}}AFX_MSG_MAP
END_MESSAGE_MAP()

/////////////////////////////////////////////////////////////////////////////
// CTestDlg message handlers

BOOL CTestDlg::OnInitDialog()
{

	ClxDialog::OnInitDialog();

  

	static DLGCTLINFO  dcMenuGroup[] = //动态改变控制的位置及大小
	{
    //{IDOK, MOVEX, 100},
    //{IDCANCEL, MOVEX, 100},
		 {IDC_STATIC_PICTURE, MOVEY, 100},
		{IDC_STATIC_LOGAL, MOVEY, 100},
		{IDC_STATIC_VERSION, MOVEY, 100},
		{IDC_LIST_TAGSHOW, ELASTICXY, 100},
		{IDC_STATICINFORORDER, ELASTICX, 100},
		{IDC_LIST_INFO, ELASTICX, 100},
		{IDC_STATICINFORORDER, MOVEY, 100},
		{IDC_LIST_INFO, MOVEY, 100},
    
};

//  设置控件信息
SetControlProperty(dcMenuGroup, sizeof(dcMenuGroup)/sizeof(DLGCTLINFO));//使动太控制有效



	// Add "About..." menu item to system menu.

	// IDM_ABOUTBOX must be in the system command range.
	ASSERT((IDM_ABOUTBOX & 0xFFF0) == IDM_ABOUTBOX);
	ASSERT(IDM_ABOUTBOX < 0xF000);

	CMenu* pSysMenu = GetSystemMenu(FALSE);
	if (pSysMenu != NULL)
	{
		CString strAboutMenu;
		strAboutMenu.LoadString(IDS_ABOUTBOX);
		if (!strAboutMenu.IsEmpty())
		{
			pSysMenu->AppendMenu(MF_SEPARATOR);
			pSysMenu->AppendMenu(MF_STRING, IDM_ABOUTBOX, strAboutMenu);
		}
	}

	// Set the icon for this dialog.  The framework does this automatically
	//  when the application's main window is not a dialog
	SetIcon(m_hIcon, TRUE);			// Set big icon
	SetIcon(m_hIcon, FALSE);		// Set small icon

	// TODO: Add extra initialization here
 	CString str;
	m_ctrTagShow.InsertColumn(1,"Num",LVCFMT_CENTER,30);
	m_ctrTagShow.InsertColumn(1,"ReaderID",LVCFMT_CENTER,60);
	m_ctrTagShow.InsertColumn(2,"TagID",LVCFMT_CENTER,200);	
	m_ctrTagShow.InsertColumn(3,"Count",LVCFMT_CENTER,50);
	m_ctrTagShow.InsertColumn(4,"Sate",LVCFMT_CENTER,40);
	m_ctrTagShow.InsertColumn(5,"Inteval",LVCFMT_CENTER,55);
	m_ctrTagShow.InsertColumn(6,"Min",LVCFMT_CENTER,50);
	m_ctrTagShow.InsertColumn(7,"Max",LVCFMT_CENTER,50);
	m_ctrTagShow.InsertColumn(8,"LastTime",LVCFMT_CENTER,60);
	m_ctrTagShow.InsertColumn(9,"FistTime",LVCFMT_CENTER,60);
	//m_ctrTagShow.SetExtendedStyle (   LVS_EX_GRIDLINES);
	m_ctrTagShow.SetExtendedStyle(LVS_EX_FULLROWSELECT| LVS_EX_GRIDLINES); //| m_ctrTagShow.GetExtendedStyle());
	for(int i=0;i<2;i++)
	{
		str.Format("%d",i);
		m_ComboCANInd.AddString(str);
	}
	 m_ComboCANInd.SetCurSel(0);
	 
		m_devtype=2;//这PCI－9810
		UpdateData(false);
    m_fontLogal.CreateFont(//创建一个新的字体。
   12,// nHeight
   5,// nWidth
   0,// nEscapement
   0,// nOrientation
   FW_NORMAL,// nWeight
   FALSE,// bItalic
   FALSE,// bUnderline
   FALSE,// cStrikeOut
   ANSI_CHARSET,// nCharSet
   OUT_DEFAULT_PRECIS,// nOutPrecision
   CLIP_DEFAULT_PRECIS,// nClipPrecision
   ANTIALIASED_QUALITY,// nQuality
   DEFAULT_PITCH | FF_SWISS,// nPitchAndFamily
   _T("Courier"));// lpszFacename
	CStatic * pTxt = (CStatic *)GetDlgItem(IDC_STATIC_LOGAL);//ID根据你的实际情况给定，得到静态文本框的指针
	pTxt->SetFont(&m_fontLogal);
	GetDlgItem(IDC_BUTTON_RESETCAN)->EnableWindow(false);//使控件不可用。
	GetDlgItem(IDC_BUTTON_SETMODE)->EnableWindow(false);
	GetDlgItem(IDC_BUTTON_CALLTAG)->EnableWindow(false);
	GetDlgItem(IDC_BUTTON_READEDATA)->EnableWindow(false);
	GetDlgItem(IDC_BUTTON_STARTCAN)->EnableWindow(false);
	GetDlgItem(IDC_BUTTON_SETPLUS)->EnableWindow(false);
	GetDlgItem(IDC_BUTTON_GETPLUS)->EnableWindow(false);
    GetDlgItem(IDC_BUTTON_GETMODE)->EnableWindow(false);
	GetDlgItem(IDC_BUT_START_POLLING)->EnableWindow(false);

	InitializeCriticalSection(&m_Section);
	SetTimer(1,2000,NULL);




//     CStringArray   strarray;   //在程序当前路径下查找配置文件，若成功则成功配置，求同否则就默认配置
     CFile file;
    CFileException fe;   
    CString      filepath;
	char   szBuffer[MAX_PATH];
	  int    itemp;
    GetModuleFileName(AfxGetInstanceHandle(), szBuffer, MAX_PATH); 
	filepath=szBuffer;
	itemp=filepath.ReverseFind('\\');
    filepath.Format("%s\\config.set",filepath.Left(itemp));
	   //以读方式打开文件
   if(!file.Open(filepath,CFile::modeRead,&fe))
      {	
		
		 m_ComboMode.SetCurSel(0);
		m_ctrBaud.SetCurSel(0);
		m_ComboSendType.SetCurSel(0);//默认配置
	    m_lgReaderInterval=500;
		m_nReaderMode=1;
		m_EditSendFrmID=46;
		m_ctrReaderPlus.SetCurSel(31);
		m_strTagID="0101010202101121";
		m_wordInterval=2000;
       m_strConnect_name=GetTheSQLConnect();
		ConnectTheSQLDate();

               // fe.ReportError();
		UpdateData(false);
          return true;
       }
        
        //构建CArchive 对象
   CArchive ar(&file,CArchive::load);//文件配置
  
	   
        Serialize(ar);

        ar.Flush();
        //读完毕，关闭文件流
        ar.Close();
        file.Close();
   //}
 ConnectTheSQLDate();


UpdateData(false);

	return TRUE;  // return TRUE  unless you set the focus to a control
}

void CTestDlg::OnSysCommand(UINT nID, LPARAM lParam)
{
	if ((nID & 0xFFF0) == IDM_ABOUTBOX)
	{
		CAboutDlg dlgAbout;
		dlgAbout.DoModal();
	}
	else
	{
		ClxDialog::OnSysCommand(nID, lParam);
	}
}

// If you add a minimize button to your dialog, you will need the code below
//  to draw the icon.  For MFC applications using the document/view model,
//  this is automatically done for you by the framework.

void CTestDlg::OnPaint() 
{
	if (IsIconic())
	{
		CPaintDC dc(this); // device context for painting

		SendMessage(WM_ICONERASEBKGND, (WPARAM) dc.GetSafeHdc(), 0);

		// Center icon in client rectangle
		int cxIcon = GetSystemMetrics(SM_CXICON);
		int cyIcon = GetSystemMetrics(SM_CYICON);
		CRect rect;
		GetClientRect(&rect);
		int x = (rect.Width() - cxIcon + 1) / 2;
		int y = (rect.Height() - cyIcon + 1) / 2;

		// Draw the icon
		dc.DrawIcon(x, y, m_hIcon);
	}
	else
	{
		ClxDialog::OnPaint();
	}
}

// The system calls this to obtain the cursor to display while the user drags
//  the minimized window.
HCURSOR CTestDlg::OnQueryDragIcon()
{
	return (HCURSOR) m_hIcon;
}

void CTestDlg::OnCancel() 
{
	// TODO: Add extra cleanup here
	int connect=m_connect;
	m_connect=0;
	if(connect)
	{
		Sleep(500);		
		VCI_CloseDevice(m_devtype,m_devind);
	}
	DeleteCriticalSection(&m_Section);
	ClxDialog::OnCancel();
}

void CTestDlg::OnOK() 
{
	// TODO: Add extra validation here
	int connect=m_connect;
	m_connect=0;
	Sleep(100);
	if(connect)
		VCI_CloseDevice(m_devtype,m_devind);
	
	DeleteCriticalSection(&m_Section);
	ClxDialog::OnOK();
}

void CTestDlg::OnButtonConnect() 
{
	// TODO: Add your control notification handler code here
	if(m_connect==1)
	{
		m_connect=0;
		Sleep(500);
		GetDlgItem(IDC_BUTTON_CONNECT)->SetWindowText("连接");
		VCI_CloseDevice(1,0);
         KillTimer(3);
		GetDlgItem(IDC_BUTTON_RESETCAN)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_SETMODE)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_CALLTAG)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_READEDATA)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_STARTCAN)->EnableWindow(false);

		GetDlgItem(IDC_BUTTON_SETPLUS)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_GETPLUS)->EnableWindow(false);
        GetDlgItem(IDC_BUTTON_GETMODE)->EnableWindow(false);
		return;
	}

	VCI_INIT_CONFIG init_config;
	int index,mode,cannum;
	CString strtiming0,strtiming1,strtmp;
	char sztiming0[20],sztiming1[20];
	unsigned char sztmp[4];
	DWORD timing0,timing1;
	
	UpdateData(true);
	index=0;
	mode=m_ComboMode.GetCurSel();
	cannum=m_ComboCANInd.GetCurSel();
    switch( m_ctrBaud.GetCurSel())
    {
    case 0 :
    	strtiming0="BF";
    	strtiming1="FF";
    	break;
    case 1 :
		strtiming0="31";
    	strtiming1="1C";
    	break;
	case 2 :
		strtiming0="18";
    	strtiming1="1C";
        break;
	case 3 :
		strtiming0="09";
    	strtiming1="1C";
        break;
    case 4 :
		strtiming0="04";
    	strtiming1="1C";
        break;
    case 5 :
		strtiming0="00";
    	strtiming1="1C";
        break;
    default:
        break;
    }




	
	strtmp=strtiming0;
	strtiming0.Format("%02s",strtmp);
	strtmp=strtiming1;
	strtiming1.Format("%02s",strtmp);
		
	strcpy(sztiming0,(LPCTSTR)strtiming0);
	strcpy(sztiming1,(LPCTSTR)strtiming1);	
	if(strtodata((unsigned char*)sztiming0,sztmp,1,0)!=0)
	{
		MessageBox("定时器0数据格式不对!","警告",MB_OK|MB_ICONQUESTION);
		return;
	}
	timing0=((DWORD)sztmp[0]);
	
	if(strtodata((unsigned char*)sztiming1,sztmp,1,0)!=0)
	{
		MessageBox("定时器1数据格式不对!","警告",MB_OK|MB_ICONQUESTION);
		return;
	}
	timing1=((DWORD)sztmp[0]);
	
	init_config.AccCode=0;
	init_config.AccMask=4294967295;
	init_config.Filter=0;
	init_config.Mode=mode;
	init_config.Timing0=(UCHAR)timing0;
	init_config.Timing1=(UCHAR)timing1;
	
	if(VCI_OpenDevice(m_devtype,index,0)!=STATUS_OK)
	{
		MessageBox("打开设备失败!","警告",MB_OK|MB_ICONQUESTION);
		return;
	}
	if(VCI_InitCAN(m_devtype,index,cannum,&init_config)!=STATUS_OK)
	{
		MessageBox("初始化CAN失败!","警告",MB_OK|MB_ICONQUESTION);
		VCI_CloseDevice(m_devtype,index);
		return;
	}
	m_connect=1;
	m_devind=index;
	m_cannum=cannum;
	GetDlgItem(IDC_BUTTON_CONNECT)->SetWindowText("断开");
	GetDlgItem(IDC_BUTTON_STARTCAN)->EnableWindow(true);
	AfxBeginThread(ReceiveThread,this);
}

void CTestDlg::OnButtonStartcan() 
{
	// TODO: Add your control notification handler code here
	if(m_connect==0)
		return;
	if(VCI_StartCAN(m_devtype,m_devind,m_cannum)==1)
	{
	    GetDlgItem(IDC_BUTTON_RESETCAN)->EnableWindow(true);
		GetDlgItem(IDC_BUTTON_SETMODE)->EnableWindow(true);
		GetDlgItem(IDC_BUTTON_CALLTAG)->EnableWindow(true);
		GetDlgItem(IDC_BUTTON_READEDATA)->EnableWindow(true);
		GetDlgItem(IDC_BUTTON_SETPLUS)->EnableWindow(true);
		GetDlgItem(IDC_BUTTON_GETPLUS)->EnableWindow(true);
        GetDlgItem(IDC_BUTTON_GETMODE)->EnableWindow(true);
		GetDlgItem(IDC_BUT_START_POLLING)->EnableWindow(true);
		ShowInfo("启动成功",0);		
	}
	else
	{
		CString str;
		str="启动失败";
		ShowInfo(str,2);
	}

}

void CTestDlg::OnButtonResetcan() 
{
	// TODO: Add your control notification handler code here
	if(m_connect==0)
		return;
	if(VCI_ResetCAN(m_devtype,m_devind,m_cannum)==1)
	{
		//GetDlgItem(IDC_BUTTON_STARTCAN)->EnableWindow(true);
		ShowInfo("复位成功",0);	
		

		//GetDlgItem(IDC_BUTTON_RESETCAN)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_SETMODE)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_CALLTAG)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_READEDATA)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_STARTCAN)->EnableWindow(true);
		GetDlgItem(IDC_BUT_START_POLLING)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_SETPLUS)->EnableWindow(false);
		GetDlgItem(IDC_BUTTON_GETPLUS)->EnableWindow(false);
        GetDlgItem(IDC_BUTTON_GETMODE)->EnableWindow(false);
	}
	else
	{
		CString str;
		str="复位失败";
		ShowInfo(str,2);
	}
	
}



void CTestDlg::ShowInfo(CString str, int code)
{
   if (m_ListInfo.GetCount()>150)
   {
	   m_ListInfo.ResetContent();
   }
	m_ListInfo.InsertString(m_ListInfo.GetCount(),str);
	m_ListInfo.SetCurSel(m_ListInfo.GetCount()-1);
}

//-----------------------------------------------------
//参数：
//str：要转换的字符串
//data：储存转换过来的数据串
//len:数据长度
//函数功能：字符串转换为数据串
//-----------------------------------------------------