main.c

pic 实例源程序 有需要的兄弟久拿走啊 别客气 哈哈 我会继续努力的

#include <REG52.H>                /* special function register declarations   */
                                  /* for the intended 8051 derivative         */

#include <stdio.h>                /* prototype declarations for I/O functions */

#ifdef MONITOR51                         /* Debugging with Monitor-51 needs   */
char code reserve [3] _at_ 0x23;         /* space for serial interrupt if     */
#endif                                   /* Stop Exection with Serial Intr.   */
                                         /* is enabled                        */
/*------------------------------------------------
The main C function.  Program execution starts
here after stack initialization.
------------------------------------------------*/
#define TxDATA (unsigned char xdata *)0x1000
//unsigned xdata char *p;
unsigned char xdata *p;
void initial(void);
int i=0;


main()
{
	initial();

	p = TxDATA;
	
	ACC=p[0];
	SBUF=ACC;
	
	while(1);
}

void Rcv_INT(void) interrupt 4
{
	if(TI)
	{
		if(i<0x4F)
		{
			i++;
			ACC=p[i];
			SBUF=ACC;
		}
		TI=0;
	}
}



void initial(void)
{
	IP=0x10;              //定义串口为高优先级中断
	IE=0x90;              //允许串口、中断0、1、定时器0
	TCON=0x05;
	TMOD=0x20;            //定时器1为自动装入(auto-load)方式
	
	PCON=0;               //SMOD(PCON.7)=1时，baudrate doubled.//smod=1 (11M晶振时为0)
	
	SCON=0xD0;            //串行口工作方式 : 9位UART, 波特率可变
	TH1=0xf3;
	TL1=0xf3;             //
	PCON=0x80|PCON;	      //波特率设置 : 9600 baud(E8--24MHZ)
	TR1=1;                //启动定时器1
}