📄 ex_data.c
字号:
/* crypto/ex_data.c *//* * Overhaul notes; * * This code is now *mostly* thread-safe. It is now easier to understand in what * ways it is safe and in what ways it is not, which is an improvement. Firstly, * all per-class stacks and index-counters for ex_data are stored in the same * global LHASH table (keyed by class). This hash table uses locking for all * access with the exception of CRYPTO_cleanup_all_ex_data(), which must only be * called when no other threads can possibly race against it (even if it was * locked, the race would mean it's possible the hash table might have been * recreated after the cleanup). As classes can only be added to the hash table, * and within each class, the stack of methods can only be incremented, the * locking mechanics are simpler than they would otherwise be. For example, the * new/dup/free ex_data functions will lock the hash table, copy the method * pointers it needs from the relevant class, then unlock the hash table before * actually applying those method pointers to the task of the new/dup/free * operations. As they can't be removed from the method-stack, only * supplemented, there's no race conditions associated with using them outside * the lock. The get/set_ex_data functions are not locked because they do not * involve this global state at all - they operate directly with a previously * obtained per-class method index and a particular "ex_data" variable. These * variables are usually instantiated per-context (eg. each RSA structure has * one) so locking on read/write access to that variable can be locked locally * if required (eg. using the "RSA" lock to synchronise access to a * per-RSA-structure ex_data variable if required). * [Geoff] *//* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] *//* ==================================================================== * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */#include "cryptlib.h"#include <openssl/lhash.h>/* What an "implementation of ex_data functionality" looks like */struct st_CRYPTO_EX_DATA_IMPL { /*********************/ /* GLOBAL OPERATIONS */ /* Return a new class index */ int (*cb_new_class)(void); /* Cleanup all state used by the implementation */ void (*cb_cleanup)(void); /************************/ /* PER-CLASS OPERATIONS */ /* Get a new method index within a class */ int (*cb_get_new_index)(int class_index, long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); /* Initialise a new CRYPTO_EX_DATA of a given class */ int (*cb_new_ex_data)(int class_index, void *obj, CRYPTO_EX_DATA *ad); /* Duplicate a CRYPTO_EX_DATA of a given class onto a copy */ int (*cb_dup_ex_data)(int class_index, CRYPTO_EX_DATA *to, CRYPTO_EX_DATA *from); /* Cleanup a CRYPTO_EX_DATA of a given class */ void (*cb_free_ex_data)(int class_index, void *obj, CRYPTO_EX_DATA *ad); };/* The implementation we use at run-time */static const CRYPTO_EX_DATA_IMPL *impl = NULL;/* To call "impl" functions, use this macro rather than referring to 'impl' directly, eg. * EX_IMPL(get_new_index)(...); */#define EX_IMPL(a) impl->cb_##a/* Predeclare the "default" ex_data implementation */static int int_new_class(void);static void int_cleanup(void);static int int_get_new_index(int class_index, long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);static int int_new_ex_data(int class_index, void *obj, CRYPTO_EX_DATA *ad);static int int_dup_ex_data(int class_index, CRYPTO_EX_DATA *to, CRYPTO_EX_DATA *from);static void int_free_ex_data(int class_index, void *obj, CRYPTO_EX_DATA *ad);static CRYPTO_EX_DATA_IMPL impl_default = { int_new_class, int_cleanup, int_get_new_index, int_new_ex_data, int_dup_ex_data, int_free_ex_data };/* Internal function that checks whether "impl" is set and if not, sets it to * the default. */static void impl_check(void) { CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA); if(!impl) impl = &impl_default; CRYPTO_w_unlock(CRYPTO_LOCK_EX_DATA); }/* A macro wrapper for impl_check that first uses a non-locked test before * invoking the function (which checks again inside a lock). */#define IMPL_CHECK if(!impl) impl_check();/* API functions to get/set the "ex_data" implementation */const CRYPTO_EX_DATA_IMPL *CRYPTO_get_ex_data_implementation(void) { IMPL_CHECK return impl; }int CRYPTO_set_ex_data_implementation(const CRYPTO_EX_DATA_IMPL *i) { int toret = 0; CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA); if(!impl) { impl = i; toret = 1; } CRYPTO_w_unlock(CRYPTO_LOCK_EX_DATA); return toret; }/****************************************************************************//* Interal (default) implementation of "ex_data" support. API functions are * further down. *//* The type that represents what each "class" used to implement locally. A STACK * of CRYPTO_EX_DATA_FUNCS plus a index-counter. The 'class_index' is the global * value representing the class that is used to distinguish these items. */typedef struct st_ex_class_item { int class_index; STACK_OF(CRYPTO_EX_DATA_FUNCS) *meth; int meth_num;} EX_CLASS_ITEM;/* When assigning new class indexes, this is our counter */static int ex_class = CRYPTO_EX_INDEX_USER;/* The global hash table of EX_CLASS_ITEM items */static LHASH *ex_data = NULL;/* The callbacks required in the "ex_data" hash table */static unsigned long ex_hash_cb(const void *a_void) { return ((const EX_CLASS_ITEM *)a_void)->class_index; }static int ex_cmp_cb(const void *a_void, const void *b_void) { return (((const EX_CLASS_ITEM *)a_void)->class_index - ((const EX_CLASS_ITEM *)b_void)->class_index); }/* Internal functions used by the "impl_default" implementation to access the * state */static int ex_data_check(void) { int toret = 1; CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA); if(!ex_data && ((ex_data = lh_new(ex_hash_cb, ex_cmp_cb)) == NULL)) toret = 0; CRYPTO_w_unlock(CRYPTO_LOCK_EX_DATA); return toret; }/* This macros helps reduce the locking from repeated checks because the * ex_data_check() function checks ex_data again inside a lock. */#define EX_DATA_CHECK(iffail) if(!ex_data && !ex_data_check()) {iffail}/* This "inner" callback is used by the callback function that follows it */static void def_cleanup_util_cb(CRYPTO_EX_DATA_FUNCS *funcs) { OPENSSL_free(funcs); }/* This callback is used in lh_doall to destroy all EX_CLASS_ITEM values from * "ex_data" prior to the ex_data hash table being itself destroyed. Doesn't do * any locking. */static void def_cleanup_cb(void *a_void) { EX_CLASS_ITEM *item = (EX_CLASS_ITEM *)a_void; sk_CRYPTO_EX_DATA_FUNCS_pop_free(item->meth, def_cleanup_util_cb); OPENSSL_free(item); }/* Return the EX_CLASS_ITEM from the "ex_data" hash table that corresponds to a * given class. Handles locking. */static EX_CLASS_ITEM *def_get_class(int class_index) { EX_CLASS_ITEM d, *p, *gen; EX_DATA_CHECK(return NULL;) d.class_index = class_index; CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA); p = lh_retrieve(ex_data, &d); if(!p) { gen = OPENSSL_malloc(sizeof(EX_CLASS_ITEM)); if(gen) { gen->class_index = class_index; gen->meth_num = 0; gen->meth = sk_CRYPTO_EX_DATA_FUNCS_new_null(); if(!gen->meth) OPENSSL_free(gen); else { /* Because we're inside the ex_data lock, the * return value from the insert will be NULL */ lh_insert(ex_data, gen); p = gen;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -