2410library.c

ARM9-2410的LED灯点亮码源

    rUMCON0 = 0x0;   //UART chaneel 0 MODEM control register, AFC disable
    rUMCON1 = 0x0;   //UART chaneel 1 MODEM control register, AFC disable

	/* 串口0 */    
    rULCON0 = 0x3;   //Line control register : Normal,No parity,1 stop,8 bits
     //    [10]       [9]     [8]        [7]        [6]      [5]         [4]           [3:2]        [1:0]
     // Clock Sel,  Tx Int,  Rx Int, Rx Time Out, Rx err, Loop-back, Send break,  Transmit Mode, Receive Mode
     //     0          1       0    ,     0          1        0           0     ,       01          01
     //   PCLK       Level    Pulse    Disable    Generate  Normal      Normal        Interrupt or Polling
    rUCON0  = 0x245;                        // Control register
    rUBRDIV0=( (int)(pclk/16./baud) -1 );   //Baud rate divisior register 0
    
	/* 串口1 */    
    rULCON1 = 0x3;
    rUCON1  = 0x245;
    rUBRDIV1=( (int)(pclk/16./baud) -1 );
    
	/* 串口2 */    
    rULCON2 = 0x3;
    rUCON2  = 0x245;
    rUBRDIV2=( (int)(pclk/16./baud) -1 );    

    for(i=0;i<100;i++);
}
/********************************************************************
// Function name	: Uart_Select
// Description	    : UART选择
// Return type		: void
// Argument         : int ch:UART号，0-UART0, 1-UART1, 2-UART2
*********************************************************************/
void Uart_Select(int ch)
{
    whichUart = ch;
}

/********************************************************************
// Function name	: Uart_GetKey
// Description	    : 从串口接收字符，如果没有字符则返回0
// Return type		: char:接收到的字符
// Argument         : void
*********************************************************************/
char Uart_GetKey(void)
{
    if(whichUart==0)
    {       
        if(rUTRSTAT0 & 0x1)    //Receive data ready
            return RdURXH0();
        else
            return 0;
    }
    else if(whichUart==1)
    {
        if(rUTRSTAT1 & 0x1)    //Receive data ready
            return RdURXH1();
        else
            return 0;
    }
    else if(whichUart==2)
    {       
        if(rUTRSTAT2 & 0x1)    //Receive data ready
            return RdURXH2();
        else
            return 0;
    } 
    return 0;   
}

/********************************************************************
// Function name	: Uart_SendByte
// Description	    : 通过串口发送字符
// Return type		: void
// Argument         : int data:待发送字符
*********************************************************************/
void Uart_SendByte(int data)
{
    if(whichUart==0)
    {
        if(data=='\n')
        {
            while(!(rUTRSTAT0 & 0x2));
//            Delay(10);                 //because the slow response of hyper_terminal 
            WrUTXH0('\r');
        }
        while(!(rUTRSTAT0 & 0x2));   //Wait until THR is empty.
//        Delay(10);
        WrUTXH0(data);
    }
    else if(whichUart==1)
    {
        if(data=='\n')
        {
            while(!(rUTRSTAT1 & 0x2));
//            Delay(10);                 //because the slow response of hyper_terminal 
            rUTXH1 = '\r';
        }
        while(!(rUTRSTAT1 & 0x2));   //Wait until THR is empty.
//        Delay(10);
        rUTXH1 = data;
    }   
    else if(whichUart==2)
    {
        if(data=='\n')
        {
            while(!(rUTRSTAT2 & 0x2));
//            Delay(10);                 //because the slow response of hyper_terminal 
            rUTXH2 = '\r';
        }
        while(!(rUTRSTAT2 & 0x2));   //Wait until THR is empty.
        Delay(10);
        rUTXH2 = data;
    }       
}

/********************************************************************
// Function name	: Uart_Getch
// Description	    : 从串口接收字符，如果没有字符则一直等待
// Return type		: char:接收到的字符
// Argument         : void
*********************************************************************/
char Uart_Getch(void)
{
    if(whichUart==0)
    {       
        while(!(rUTRSTAT0 & 0x1)); //Receive data ready
        return RdURXH0();
    }
    else if(whichUart==1)
    {       
        while(!(rUTRSTAT1 & 0x1)); //Receive data ready
        return RdURXH1();
    }
    else if(whichUart==2)
    {
        while(!(rUTRSTAT2 & 0x1)); //Receive data ready
        return RdURXH2();
    }
    return 0;
}

/********************************************************************
// Function name	: Uart_GetString
// Description	    : 从串口接收一个字符串，以回车键结束
// Return type		: void
// Argument         : char *string:收到的字符串
*********************************************************************/
void Uart_GetString(char *string)
{
    char *string2 = string;
    char c;
    while((c = Uart_Getch())!='\r')
    {
        if(c=='\b')
        {
            if( (int)string2 < (int)string )
            {
                Uart_Printf("\b \b");
                string--;
            }
        }
        else 
        {
            *string++ = c;
            Uart_SendByte(c);
        }
    }
    *string='\0';
    Uart_SendByte('\n');
}

/********************************************************************
// Function name	: Uart_SendString
// Description	    : 通过串口发送字符串
// Return type		: void
// Argument         : char *pt:字符串指针
*********************************************************************/
void Uart_SendString(char *pt)
{
    while(*pt)
        Uart_SendByte(*pt++);
}

/********************************************************************
// Function name	: Uart_Printf
// Description	    : 串口打印函数
// Return type		: void
// Argument         : char *fmt
// Argument         : ...
*********************************************************************/
void Uart_Printf(char *fmt,...)
{
    va_list ap;
    char string[256];

    va_start(ap,fmt);
    vsprintf(string,fmt,ap);
    Uart_SendString(string);
    va_end(ap);
}

/********************************************************************
// Function name	: Uart_GetIntNum
// Description	    : 从串口接收一个字符串，并将其解析为一个整数值
// Return type		: int:收到的整数值
// Argument         : void
*********************************************************************/
int Uart_GetIntNum(void)
{
    char str[30];
    char *string = str;
    int base     = 10;
    int minus    = 0;
    int result   = 0;
    int lastIndex;    
    int i;
    
    Uart_GetString(string);
    
    if(string[0]=='-')
    {
        minus = 1;
        string++;
    }
    
    if(string[0]=='0' && (string[1]=='x' || string[1]=='X'))
    {
        base    = 16;
        string += 2;
    }
    
    lastIndex = strlen(string) - 1;
    
    if(lastIndex<0)
        return -1;
    
    if(string[lastIndex]=='h' || string[lastIndex]=='H' )
    {
        base = 16;
        string[lastIndex] = 0;
        lastIndex--;
    }

    if(base==10)
    {
        result = atoi(string);
        result = minus ? (-1*result):result;
    }
    else
    {
        for(i=0;i<=lastIndex;i++)
        {
            if(isalpha(string[i]))
            {
                if(isupper(string[i]))
                    result = (result<<4) + string[i] - 'A' + 10;
                else
                    result = (result<<4) + string[i] - 'a' + 10;
            }
            else
                result = (result<<4) + string[i] - '0';
        }
        result = minus ? (-1*result):result;
    }
    return result;
}