⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 mmci.c

📁 《linux驱动程序设计从入门到精通》一书中所有的程序代码含驱动和相应的应用程序
💻 C
字号:
/* *  linux/drivers/mmc/mmci.c - ARM PrimeCell MMCI PL180/1 driver * *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */#include <linux/module.h>#include <linux/moduleparam.h>#include <linux/init.h>#include <linux/ioport.h>#include <linux/device.h>#include <linux/interrupt.h>#include <linux/delay.h>#include <linux/err.h>#include <linux/highmem.h>#include <linux/mmc/host.h>#include <linux/mmc/protocol.h>#include <linux/amba/bus.h>#include <linux/clk.h>#include <asm/cacheflush.h>#include <asm/div64.h>#include <asm/io.h>#include <asm/scatterlist.h>#include <asm/sizes.h>#include <asm/mach/mmc.h>#include "mmci.h"#define DRIVER_NAME "mmci-pl18x"#define DBG(host,fmt,args...)	\	pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)static unsigned int fmax = 515633;static voidmmci_request_end(struct mmci_host *host, struct mmc_request *mrq){	writel(0, host->base + MMCICOMMAND);	BUG_ON(host->data);	host->mrq = NULL;	host->cmd = NULL;	if (mrq->data)		mrq->data->bytes_xfered = host->data_xfered;	/*	 * Need to drop the host lock here; mmc_request_done may call	 * back into the driver...	 */	spin_unlock(&host->lock);	mmc_request_done(host->mmc, mrq);	spin_lock(&host->lock);}static void mmci_stop_data(struct mmci_host *host){	writel(0, host->base + MMCIDATACTRL);	writel(0, host->base + MMCIMASK1);	host->data = NULL;}static void mmci_start_data(struct mmci_host *host, struct mmc_data *data){	unsigned int datactrl, timeout, irqmask;	unsigned long long clks;	void __iomem *base;	int blksz_bits;	DBG(host, "blksz %04x blks %04x flags %08x\n",	    data->blksz, data->blocks, data->flags);	host->data = data;	host->size = data->blksz;	host->data_xfered = 0;	mmci_init_sg(host, data);	clks = (unsigned long long)data->timeout_ns * host->cclk;	do_div(clks, 1000000000UL);	timeout = data->timeout_clks + (unsigned int)clks;	base = host->base;	writel(timeout, base + MMCIDATATIMER);	writel(host->size, base + MMCIDATALENGTH);	blksz_bits = ffs(data->blksz) - 1;	BUG_ON(1 << blksz_bits != data->blksz);	datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;	if (data->flags & MMC_DATA_READ) {		datactrl |= MCI_DPSM_DIRECTION;		irqmask = MCI_RXFIFOHALFFULLMASK;		/*		 * If we have less than a FIFOSIZE of bytes to transfer,		 * trigger a PIO interrupt as soon as any data is available.		 */		if (host->size < MCI_FIFOSIZE)			irqmask |= MCI_RXDATAAVLBLMASK;	} else {		/*		 * We don't actually need to include "FIFO empty" here		 * since its implicit in "FIFO half empty".		 */		irqmask = MCI_TXFIFOHALFEMPTYMASK;	}	writel(datactrl, base + MMCIDATACTRL);	writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0);	writel(irqmask, base + MMCIMASK1);}static voidmmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c){	void __iomem *base = host->base;	DBG(host, "op %02x arg %08x flags %08x\n",	    cmd->opcode, cmd->arg, cmd->flags);	if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {		writel(0, base + MMCICOMMAND);		udelay(1);	}	c |= cmd->opcode | MCI_CPSM_ENABLE;	if (cmd->flags & MMC_RSP_PRESENT) {		if (cmd->flags & MMC_RSP_136)			c |= MCI_CPSM_LONGRSP;		c |= MCI_CPSM_RESPONSE;	}	if (/*interrupt*/0)		c |= MCI_CPSM_INTERRUPT;	host->cmd = cmd;	writel(cmd->arg, base + MMCIARGUMENT);	writel(c, base + MMCICOMMAND);}static voidmmci_data_irq(struct mmci_host *host, struct mmc_data *data,	      unsigned int status){	if (status & MCI_DATABLOCKEND) {		host->data_xfered += data->blksz;	}	if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {		if (status & MCI_DATACRCFAIL)			data->error = MMC_ERR_BADCRC;		else if (status & MCI_DATATIMEOUT)			data->error = MMC_ERR_TIMEOUT;		else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN))			data->error = MMC_ERR_FIFO;		status |= MCI_DATAEND;		/*		 * We hit an error condition.  Ensure that any data		 * partially written to a page is properly coherent.		 */		if (host->sg_len && data->flags & MMC_DATA_READ)			flush_dcache_page(host->sg_ptr->page);	}	if (status & MCI_DATAEND) {		mmci_stop_data(host);		if (!data->stop) {			mmci_request_end(host, data->mrq);		} else {			mmci_start_command(host, data->stop, 0);		}	}}static voidmmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,	     unsigned int status){	void __iomem *base = host->base;	host->cmd = NULL;	cmd->resp[0] = readl(base + MMCIRESPONSE0);	cmd->resp[1] = readl(base + MMCIRESPONSE1);	cmd->resp[2] = readl(base + MMCIRESPONSE2);	cmd->resp[3] = readl(base + MMCIRESPONSE3);	if (status & MCI_CMDTIMEOUT) {		cmd->error = MMC_ERR_TIMEOUT;	} else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) {		cmd->error = MMC_ERR_BADCRC;	}	if (!cmd->data || cmd->error != MMC_ERR_NONE) {		if (host->data)			mmci_stop_data(host);		mmci_request_end(host, cmd->mrq);	} else if (!(cmd->data->flags & MMC_DATA_READ)) {		mmci_start_data(host, cmd->data);	}}static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain){	void __iomem *base = host->base;	char *ptr = buffer;	u32 status;	do {		int count = host->size - (readl(base + MMCIFIFOCNT) << 2);		if (count > remain)			count = remain;		if (count <= 0)			break;		readsl(base + MMCIFIFO, ptr, count >> 2);		ptr += count;		remain -= count;		if (remain == 0)			break;		status = readl(base + MMCISTATUS);	} while (status & MCI_RXDATAAVLBL);	return ptr - buffer;}static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status){	void __iomem *base = host->base;	char *ptr = buffer;	do {		unsigned int count, maxcnt;		maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE;		count = min(remain, maxcnt);		writesl(base + MMCIFIFO, ptr, count >> 2);		ptr += count;		remain -= count;		if (remain == 0)			break;		status = readl(base + MMCISTATUS);	} while (status & MCI_TXFIFOHALFEMPTY);	return ptr - buffer;}/* * PIO data transfer IRQ handler. */static irqreturn_t mmci_pio_irq(int irq, void *dev_id){	struct mmci_host *host = dev_id;	void __iomem *base = host->base;	u32 status;	status = readl(base + MMCISTATUS);	DBG(host, "irq1 %08x\n", status);	do {		unsigned long flags;		unsigned int remain, len;		char *buffer;		/*		 * For write, we only need to test the half-empty flag		 * here - if the FIFO is completely empty, then by		 * definition it is more than half empty.		 *		 * For read, check for data available.		 */		if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL)))			break;		/*		 * Map the current scatter buffer.		 */		buffer = mmci_kmap_atomic(host, &flags) + host->sg_off;		remain = host->sg_ptr->length - host->sg_off;		len = 0;		if (status & MCI_RXACTIVE)			len = mmci_pio_read(host, buffer, remain);		if (status & MCI_TXACTIVE)			len = mmci_pio_write(host, buffer, remain, status);		/*		 * Unmap the buffer.		 */		mmci_kunmap_atomic(host, buffer, &flags);		host->sg_off += len;		host->size -= len;		remain -= len;		if (remain)			break;		/*		 * If we were reading, and we have completed this		 * page, ensure that the data cache is coherent.		 */		if (status & MCI_RXACTIVE)			flush_dcache_page(host->sg_ptr->page);		if (!mmci_next_sg(host))			break;		status = readl(base + MMCISTATUS);	} while (1);	/*	 * If we're nearing the end of the read, switch to	 * "any data available" mode.	 */	if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE)		writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1);	/*	 * If we run out of data, disable the data IRQs; this	 * prevents a race where the FIFO becomes empty before	 * the chip itself has disabled the data path, and	 * stops us racing with our data end IRQ.	 */	if (host->size == 0) {		writel(0, base + MMCIMASK1);		writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0);	}	return IRQ_HANDLED;}/* * Handle completion of command and data transfers. */static irqreturn_t mmci_irq(int irq, void *dev_id){	struct mmci_host *host = dev_id;	u32 status;	int ret = 0;	spin_lock(&host->lock);	do {		struct mmc_command *cmd;		struct mmc_data *data;		status = readl(host->base + MMCISTATUS);		status &= readl(host->base + MMCIMASK0);		writel(status, host->base + MMCICLEAR);		DBG(host, "irq0 %08x\n", status);		data = host->data;		if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|			      MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data)			mmci_data_irq(host, data, status);		cmd = host->cmd;		if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd)			mmci_cmd_irq(host, cmd, status);		ret = 1;	} while (status);	spin_unlock(&host->lock);	return IRQ_RETVAL(ret);}static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq){	struct mmci_host *host = mmc_priv(mmc);	WARN_ON(host->mrq != NULL);	spin_lock_irq(&host->lock);	host->mrq = mrq;	if (mrq->data && mrq->data->flags & MMC_DATA_READ)		mmci_start_data(host, mrq->data);	mmci_start_command(host, mrq->cmd, 0);	spin_unlock_irq(&host->lock);}static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios){	struct mmci_host *host = mmc_priv(mmc);	u32 clk = 0, pwr = 0;	if (ios->clock) {		if (ios->clock >= host->mclk) {			clk = MCI_CLK_BYPASS;			host->cclk = host->mclk;		} else {			clk = host->mclk / (2 * ios->clock) - 1;			if (clk > 256)				clk = 255;			host->cclk = host->mclk / (2 * (clk + 1));		}		clk |= MCI_CLK_ENABLE;	}	if (host->plat->translate_vdd)		pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);	switch (ios->power_mode) {	case MMC_POWER_OFF:		break;	case MMC_POWER_UP:		pwr |= MCI_PWR_UP;		break;	case MMC_POWER_ON:		pwr |= MCI_PWR_ON;		break;	}	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)		pwr |= MCI_ROD;	writel(clk, host->base + MMCICLOCK);	if (host->pwr != pwr) {		host->pwr = pwr;		writel(pwr, host->base + MMCIPOWER);	}}static const struct mmc_host_ops mmci_ops = {	.request	= mmci_request,	.set_ios	= mmci_set_ios,};static void mmci_check_status(unsigned long data){	struct mmci_host *host = (struct mmci_host *)data;	unsigned int status;	status = host->plat->status(mmc_dev(host->mmc));	if (status ^ host->oldstat)		mmc_detect_change(host->mmc, 0);	host->oldstat = status;	mod_timer(&host->timer, jiffies + HZ);}static int mmci_probe(struct amba_device *dev, void *id){	struct mmc_platform_data *plat = dev->dev.platform_data;	struct mmci_host *host;	struct mmc_host *mmc;	int ret;	/* must have platform data */	if (!plat) {		ret = -EINVAL;		goto out;	}	ret = amba_request_regions(dev, DRIVER_NAME);	if (ret)		goto out;	mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev);	if (!mmc) {		ret = -ENOMEM;		goto rel_regions;	}	host = mmc_priv(mmc);	host->clk = clk_get(&dev->dev, "MCLK");	if (IS_ERR(host->clk)) {		ret = PTR_ERR(host->clk);		host->clk = NULL;		goto host_free;	}	ret = clk_enable(host->clk);	if (ret)		goto clk_free;	host->plat = plat;	host->mclk = clk_get_rate(host->clk);	host->mmc = mmc;	host->base = ioremap(dev->res.start, SZ_4K);	if (!host->base) {		ret = -ENOMEM;		goto clk_disable;	}	mmc->ops = &mmci_ops;	mmc->f_min = (host->mclk + 511) / 512;	mmc->f_max = min(host->mclk, fmax);	mmc->ocr_avail = plat->ocr_mask;	mmc->caps = MMC_CAP_MULTIWRITE;	/*	 * We can do SGIO	 */	mmc->max_hw_segs = 16;	mmc->max_phys_segs = NR_SG;	/*	 * Since we only have a 16-bit data length register, we must	 * ensure that we don't exceed 2^16-1 bytes in a single request.	 * Choose 64 (512-byte) sectors as the limit.	 */	mmc->max_sectors = 64;	/*	 * Set the maximum segment size.  Since we aren't doing DMA	 * (yet) we are only limited by the data length register.	 */	mmc->max_seg_size = mmc->max_sectors << 9;	spin_lock_init(&host->lock);	writel(0, host->base + MMCIMASK0);	writel(0, host->base + MMCIMASK1);	writel(0xfff, host->base + MMCICLEAR);	ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);	if (ret)		goto unmap;	ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host);	if (ret)		goto irq0_free;	writel(MCI_IRQENABLE, host->base + MMCIMASK0);	amba_set_drvdata(dev, mmc);	mmc_add_host(mmc);	printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",		mmc_hostname(mmc), amba_rev(dev), amba_config(dev),		(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);	init_timer(&host->timer);	host->timer.data = (unsigned long)host;	host->timer.function = mmci_check_status;	host->timer.expires = jiffies + HZ;	add_timer(&host->timer);	return 0; irq0_free:	free_irq(dev->irq[0], host); unmap:	iounmap(host->base); clk_disable:	clk_disable(host->clk); clk_free:	clk_put(host->clk); host_free:	mmc_free_host(mmc); rel_regions:	amba_release_regions(dev); out:	return ret;}static int mmci_remove(struct amba_device *dev){	struct mmc_host *mmc = amba_get_drvdata(dev);	amba_set_drvdata(dev, NULL);	if (mmc) {		struct mmci_host *host = mmc_priv(mmc);		del_timer_sync(&host->timer);		mmc_remove_host(mmc);		writel(0, host->base + MMCIMASK0);		writel(0, host->base + MMCIMASK1);		writel(0, host->base + MMCICOMMAND);		writel(0, host->base + MMCIDATACTRL);		free_irq(dev->irq[0], host);		free_irq(dev->irq[1], host);		iounmap(host->base);		clk_disable(host->clk);		clk_put(host->clk);		mmc_free_host(mmc);		amba_release_regions(dev);	}	return 0;}#ifdef CONFIG_PMstatic int mmci_suspend(struct amba_device *dev, pm_message_t state){	struct mmc_host *mmc = amba_get_drvdata(dev);	int ret = 0;	if (mmc) {		struct mmci_host *host = mmc_priv(mmc);		ret = mmc_suspend_host(mmc, state);		if (ret == 0)			writel(0, host->base + MMCIMASK0);	}	return ret;}static int mmci_resume(struct amba_device *dev){	struct mmc_host *mmc = amba_get_drvdata(dev);	int ret = 0;	if (mmc) {		struct mmci_host *host = mmc_priv(mmc);		writel(MCI_IRQENABLE, host->base + MMCIMASK0);		ret = mmc_resume_host(mmc);	}	return ret;}#else#define mmci_suspend	NULL#define mmci_resume	NULL#endifstatic struct amba_id mmci_ids[] = {	{		.id	= 0x00041180,		.mask	= 0x000fffff,	},	{		.id	= 0x00041181,		.mask	= 0x000fffff,	},	{ 0, 0 },};static struct amba_driver mmci_driver = {	.drv		= {		.name	= DRIVER_NAME,	},	.probe		= mmci_probe,	.remove		= mmci_remove,	.suspend	= mmci_suspend,	.resume		= mmci_resume,	.id_table	= mmci_ids,};static int __init mmci_init(void){	return amba_driver_register(&mmci_driver);}static void __exit mmci_exit(void){	amba_driver_unregister(&mmci_driver);}module_init(mmci_init);module_exit(mmci_exit);module_param(fmax, uint, 0444);MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver");MODULE_LICENSE("GPL");

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -