📄 i2c-nforce2.c
字号:
/* SMBus driver for nVidia nForce2 MCP Ported to 2.5 Patrick Dreker <patrick@dreker.de>, Copyright (c) 2003 Hans-Frieder Vogt <hfvogt@arcor.de>, Based on SMBus 2.0 driver for AMD-8111 IO-Hub Copyright (c) 2002 Vojtech Pavlik This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.*//* SUPPORTED DEVICES PCI ID nForce2 MCP 0064 This driver supports the 2 SMBuses that are included in the MCP2 of the nForce2 chipset.*//* Note: we assume there can only be one nForce2, with two SMBus interfaces */#include <linux/config.h>#include <linux/module.h>#include <linux/pci.h>#include <linux/kernel.h>#include <linux/stddef.h>#include <linux/sched.h>#include <linux/ioport.h>#include <linux/init.h>#include <linux/i2c.h>#include <linux/delay.h>#include <asm/io.h>MODULE_LICENSE("GPL");MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>");MODULE_DESCRIPTION("nForce2 SMBus driver");#ifndef PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064#endifstruct nforce2_smbus { struct pci_dev *dev; struct i2c_adapter adapter; int base; int size;};/* * nVidia nForce2 SMBus control register definitions */#define NFORCE_PCI_SMB1 0x50#define NFORCE_PCI_SMB2 0x54/* * ACPI 2.0 chapter 13 SMBus 2.0 EC register model */#define NVIDIA_SMB_PRTCL (smbus->base + 0x00) /* protocol, PEC */#define NVIDIA_SMB_STS (smbus->base + 0x01) /* status */#define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */#define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */#define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data bytes */#define NVIDIA_SMB_ALRM_A (smbus->base + 0x25) /* alarm address */#define NVIDIA_SMB_ALRM_D (smbus->base + 0x26) /* 2 bytes alarm data */#define NVIDIA_SMB_STS_DONE 0x80#define NVIDIA_SMB_STS_ALRM 0x40#define NVIDIA_SMB_STS_RES 0x20#define NVIDIA_SMB_STS_STATUS 0x1f#define NVIDIA_SMB_PRTCL_WRITE 0x00#define NVIDIA_SMB_PRTCL_READ 0x01#define NVIDIA_SMB_PRTCL_QUICK 0x02#define NVIDIA_SMB_PRTCL_BYTE 0x04#define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06#define NVIDIA_SMB_PRTCL_WORD_DATA 0x08#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a#define NVIDIA_SMB_PRTCL_PROC_CALL 0x0c#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL 0x0d#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a#define NVIDIA_SMB_PRTCL_PEC 0x80/* Other settings */#define MAX_TIMEOUT 256static s32 nforce2_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data);static u32 nforce2_func(struct i2c_adapter *adapter);static struct i2c_algorithm smbus_algorithm = { .name = "Non-I2C SMBus adapter", .id = I2C_ALGO_SMBUS, .smbus_xfer = nforce2_access, .functionality = nforce2_func,};static struct i2c_adapter nforce2_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, .name = "unset",};/* Return -1 on error. See smbus.h for more information */static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data){ struct nforce2_smbus *smbus = adap->algo_data; unsigned char protocol, pec, temp; unsigned char len = 0; /* to keep the compiler quiet */ int timeout = 0; int i; protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ : NVIDIA_SMB_PRTCL_WRITE; pec = (flags & I2C_CLIENT_PEC) ? NVIDIA_SMB_PRTCL_PEC : 0; switch (size) { case I2C_SMBUS_QUICK: protocol |= NVIDIA_SMB_PRTCL_QUICK; read_write = I2C_SMBUS_WRITE; break; case I2C_SMBUS_BYTE: if (read_write == I2C_SMBUS_WRITE) outb_p(command, NVIDIA_SMB_CMD); protocol |= NVIDIA_SMB_PRTCL_BYTE; break; case I2C_SMBUS_BYTE_DATA: outb_p(command, NVIDIA_SMB_CMD); if (read_write == I2C_SMBUS_WRITE) outb_p(data->byte, NVIDIA_SMB_DATA); protocol |= NVIDIA_SMB_PRTCL_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: outb_p(command, NVIDIA_SMB_CMD); if (read_write == I2C_SMBUS_WRITE) { outb_p(data->word, NVIDIA_SMB_DATA); outb_p(data->word >> 8, NVIDIA_SMB_DATA+1); } protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec; break; case I2C_SMBUS_BLOCK_DATA: outb_p(command, NVIDIA_SMB_CMD); if (read_write == I2C_SMBUS_WRITE) { len = min_t(u8, data->block[0], 32); outb_p(len, NVIDIA_SMB_BCNT); for (i = 0; i < len; i++) outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i); } protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec; break; case I2C_SMBUS_I2C_BLOCK_DATA: len = min_t(u8, data->block[0], 32); outb_p(command, NVIDIA_SMB_CMD); outb_p(len, NVIDIA_SMB_BCNT); if (read_write == I2C_SMBUS_WRITE) for (i = 0; i < len; i++) outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i); protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA; break; case I2C_SMBUS_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); return -1; /* outb_p(command, NVIDIA_SMB_CMD); outb_p(data->word, NVIDIA_SMB_DATA); outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1); protocol = NVIDIA_SMB_PRTCL_PROC_CALL | pec; read_write = I2C_SMBUS_READ; break; */ case I2C_SMBUS_BLOCK_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n"); return -1; /* protocol |= pec; len = min_t(u8, data->block[0], 31); outb_p(command, NVIDIA_SMB_CMD); outb_p(len, NVIDIA_SMB_BCNT); for (i = 0; i < len; i++) outb_p(data->block[i + 1], NVIDIA_SMB_DATA + i); protocol = NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL | pec; read_write = I2C_SMBUS_READ; break; */ case I2C_SMBUS_WORD_DATA_PEC: case I2C_SMBUS_BLOCK_DATA_PEC: case I2C_SMBUS_PROC_CALL_PEC: case I2C_SMBUS_BLOCK_PROC_CALL_PEC: dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size); return -1; default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); return -1; } outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR); outb_p(protocol, NVIDIA_SMB_PRTCL); temp = inb_p(NVIDIA_SMB_STS);#if 0 do { i2c_do_pause(1); temp = inb_p(NVIDIA_SMB_STS); } while (((temp & NVIDIA_SMB_STS_DONE) == 0) && (timeout++ < MAX_TIMEOUT));#endif if (~temp & NVIDIA_SMB_STS_DONE) { udelay(500); temp = inb_p(NVIDIA_SMB_STS); } if (~temp & NVIDIA_SMB_STS_DONE) { current->state = TASK_INTERRUPTIBLE; schedule_timeout(HZ/100); temp = inb_p(NVIDIA_SMB_STS); } if ((timeout >= MAX_TIMEOUT) || (~temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) return -1; if (read_write == I2C_SMBUS_WRITE) return 0; switch (size) { case I2C_SMBUS_BYTE: case I2C_SMBUS_BYTE_DATA: data->byte = inb_p(NVIDIA_SMB_DATA); break; case I2C_SMBUS_WORD_DATA: /* case I2C_SMBUS_PROC_CALL: not supported */ data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8); break; case I2C_SMBUS_BLOCK_DATA: /* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */ len = inb_p(NVIDIA_SMB_BCNT); len = min_t(u8, len, 32); case I2C_SMBUS_I2C_BLOCK_DATA: for (i = 0; i < len; i++) data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i); data->block[0] = len; break; } return 0;}static u32 nforce2_func(struct i2c_adapter *adapter){ /* other functionality might be possible, but is not tested */ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* | I2C_FUNC_SMBUS_BLOCK_DATA */;}static struct pci_device_id nforce2_ids[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0 }};static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg, struct nforce2_smbus *smbus, char *name){ u16 iobase; int error; if (pci_read_config_word(dev, reg, &iobase) != PCIBIOS_SUCCESSFUL) { dev_err(&smbus->adapter.dev, "Error reading PCI config for %s\n", name); return -1; } smbus->dev = dev; smbus->base = iobase & 0xfffc; smbus->size = 8; if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", smbus->base, smbus->base+smbus->size-1, name); return -1; } smbus->adapter = nforce2_adapter; smbus->adapter.algo_data = smbus; smbus->adapter.dev.parent = &dev->dev; snprintf(smbus->adapter.name, I2C_NAME_SIZE, "SMBus nForce2 adapter at %04x", smbus->base); error = i2c_add_adapter(&smbus->adapter); if (error) { dev_err(&smbus->adapter.dev, "Failed to register adapter.\n"); release_region(smbus->base, smbus->size); return -1; } dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base); return 0;}static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_id *id){ struct nforce2_smbus *smbuses; int res1, res2; /* we support 2 SMBus adapters */ if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL))) return -ENOMEM; memset (smbuses, 0, 2*sizeof(struct nforce2_smbus)); pci_set_drvdata(dev, smbuses); /* SMBus adapter 1 */ res1 = nforce2_probe_smb (dev, NFORCE_PCI_SMB1, &smbuses[0], "SMB1"); if (res1 < 0) { dev_err(&dev->dev, "Error probing SMB1.\n"); smbuses[0].base = 0; /* to have a check value */ } res2 = nforce2_probe_smb (dev, NFORCE_PCI_SMB2, &smbuses[1], "SMB2"); if (res2 < 0) { dev_err(&dev->dev, "Error probing SMB2.\n"); smbuses[1].base = 0; /* to have a check value */ } if ((res1 < 0) && (res2 < 0)) { /* we did not find even one of the SMBuses, so we give up */ kfree(smbuses); return -ENODEV; } return 0;}static void __devexit nforce2_remove(struct pci_dev *dev){ struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev); if (smbuses[0].base) { i2c_del_adapter(&smbuses[0].adapter); release_region(smbuses[0].base, smbuses[0].size); } if (smbuses[1].base) { i2c_del_adapter(&smbuses[1].adapter); release_region(smbuses[1].base, smbuses[1].size); } kfree(smbuses);}static struct pci_driver nforce2_driver = { .name = "nForce2 SMBus", .id_table = nforce2_ids, .probe = nforce2_probe, .remove = __devexit_p(nforce2_remove),};static int __init nforce2_init(void){ return pci_module_init(&nforce2_driver);}static void __exit nforce2_exit(void){ pci_unregister_driver(&nforce2_driver);}module_init(nforce2_init);module_exit(nforce2_exit);
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -