smsc-ircc2.h

《linux驱动程序设计从入门到精通》一书中所有的程序代码含驱动和相应的应用程序

/*********************************************************************
 * $Id: smsc-ircc2.h,v 1.12.2.1 2002/10/27 10:52:37 dip Exp $
 *
 * Description:   Definitions for the SMC IrCC chipset
 * Status:        Experimental.
 * Author:        Daniele Peri ([e-mail])
 *
 *     Copyright (c) 2002      Daniele Peri
 *     All Rights Reserved.
 *
 * Based on smc-ircc.h:
 *
 *     Copyright (c) 1999-2000, Dag Brattli <[e-mail]>
 *     Copyright (c) 1998-1999, Thomas Davis ([e-mail]>
 *     All Rights Reserved
 *
 *
 *     This program is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of
 *     the License, or (at your option) any later version.
 *
 *     This program is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 *     GNU General Public License for more details.
 *
 *     You should have received a copy of the GNU General Public License
 *     along with this program; if not, write to the Free Software
 *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 *     MA 02111-1307 USA
 *
 ********************************************************************/

#ifndef SMSC_IRCC2_H
#define SMSC_IRCC2_H

/* DMA modes needed */
#define DMA_TX_MODE                0x08    /* Mem to I/O, ++, demand. */
#define DMA_RX_MODE                0x04    /* I/O to mem, ++, demand. */

/* Master Control Register */
#define IRCC_MASTER                0x07
#define   IRCC_MASTER_POWERDOWN	   0x80
#define   IRCC_MASTER_RESET        0x40
#define   IRCC_MASTER_INT_EN       0x20
#define   IRCC_MASTER_ERROR_RESET  0x10

/* Register block 0 */

/* Interrupt Identification */
#define IRCC_IIR					0x01
#define   IRCC_IIR_ACTIVE_FRAME		0x80
#define   IRCC_IIR_EOM				0x40
#define   IRCC_IIR_RAW_MODE			0x20
#define   IRCC_IIR_FIFO				0x10

/* Interrupt Enable */
#define IRCC_IER					0x02
#define   IRCC_IER_ACTIVE_FRAME		0x80
#define   IRCC_IER_EOM				0x40
#define   IRCC_IER_RAW_MODE			0x20
#define   IRCC_IER_FIFO				0x10

/* Line Status Register */
#define IRCC_LSR					0x03
#define   IRCC_LSR_UNDERRUN			0x80
#define   IRCC_LSR_OVERRUN			0x40
#define   IRCC_LSR_FRAME_ERROR		0x20
#define   IRCC_LSR_SIZE_ERROR		0x10
#define   IRCC_LSR_CRC_ERROR		0x80
#define   IRCC_LSR_FRAME_ABORT		0x40

/* Line Status Address Register */
#define IRCC_LSAR					0x03
#define IRCC_LSAR_ADDRESS_MASK		0x07

/* Line Control Register A */
#define IRCC_LCR_A                 0x04
#define   IRCC_LCR_A_FIFO_RESET    0x80
#define   IRCC_LCR_A_FAST          0x40
#define   IRCC_LCR_A_GP_DATA       0x20
#define   IRCC_LCR_A_RAW_TX        0x10
#define   IRCC_LCR_A_RAW_RX        0x08
#define   IRCC_LCR_A_ABORT         0x04
#define   IRCC_LCR_A_DATA_DONE     0x02

/* Line Control Register B */
#define IRCC_LCR_B                 0x05
#define   IRCC_LCR_B_SCE_DISABLED  0x00
#define   IRCC_LCR_B_SCE_TRANSMIT  0x40
#define   IRCC_LCR_B_SCE_RECEIVE   0x80
#define   IRCC_LCR_B_SCE_UNDEFINED 0xc0
#define   IRCC_LCR_B_SIP_ENABLE	   0x20
#define   IRCC_LCR_B_BRICK_WALL    0x10

/* Bus Status Register */
#define IRCC_BSR                   0x06
#define   IRCC_BSR_NOT_EMPTY	   0x80
#define   IRCC_BSR_FIFO_FULL	   0x40
#define   IRCC_BSR_TIMEOUT	   0x20

/* Register block 1 */

#define IRCC_FIFO_THRESHOLD			0x02

#define IRCC_SCE_CFGA				0x00
#define   IRCC_CFGA_AUX_IR			0x80
#define   IRCC_CFGA_HALF_DUPLEX		0x04
#define   IRCC_CFGA_TX_POLARITY		0x02
#define   IRCC_CFGA_RX_POLARITY		0x01

#define   IRCC_CFGA_COM				0x00
#define		IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK	0x87
#define		IRCC_CFGA_IRDA_SIR_A	0x08
#define		IRCC_CFGA_ASK_SIR		0x10
#define		IRCC_CFGA_IRDA_SIR_B	0x18
#define		IRCC_CFGA_IRDA_HDLC		0x20
#define		IRCC_CFGA_IRDA_4PPM		0x28
#define		IRCC_CFGA_CONSUMER		0x30
#define		IRCC_CFGA_RAW_IR		0x38
#define     IRCC_CFGA_OTHER			0x40

#define IRCC_IR_HDLC               0x04
#define IRCC_IR_4PPM               0x01
#define IRCC_IR_CONSUMER           0x02

#define IRCC_SCE_CFGB	           0x01
#define IRCC_CFGB_LOOPBACK         0x20
#define IRCC_CFGB_LPBCK_TX_CRC	   0x10
#define IRCC_CFGB_NOWAIT	   0x08
#define IRCC_CFGB_STRING_MOVE	   0x04
#define IRCC_CFGB_DMA_BURST	   0x02
#define IRCC_CFGB_DMA_ENABLE	   0x01

#define IRCC_CFGB_MUX_COM          0x00
#define IRCC_CFGB_MUX_IR           0x40
#define IRCC_CFGB_MUX_AUX          0x80
#define IRCC_CFGB_MUX_INACTIVE	   0xc0

/* Register block 3 - Identification Registers! */
#define IRCC_ID_HIGH	           0x00   /* 0x10 */
#define IRCC_ID_LOW	           0x01   /* 0xB8 */
#define IRCC_CHIP_ID	           0x02   /* 0xF1 */
#define IRCC_VERSION	           0x03   /* 0x01 */
#define IRCC_INTERFACE	           0x04   /* low 4 = DMA, high 4 = IRQ */
#define		IRCC_INTERFACE_DMA_MASK	0x0F   /* low 4 = DMA, high 4 = IRQ */
#define		IRCC_INTERFACE_IRQ_MASK	0xF0   /* low 4 = DMA, high 4 = IRQ */

/* Register block 4 - IrDA */
#define IRCC_CONTROL               0x00
#define IRCC_BOF_COUNT_LO          0x01 /* Low byte */
#define IRCC_BOF_COUNT_HI          0x00 /* High nibble (bit 0-3) */
#define IRCC_BRICKWALL_CNT_LO      0x02 /* Low byte */
#define IRCC_BRICKWALL_CNT_HI      0x03 /* High nibble (bit 4-7) */
#define IRCC_TX_SIZE_LO            0x04 /* Low byte */
#define IRCC_TX_SIZE_HI            0x03 /* High nibble (bit 0-3) */
#define IRCC_RX_SIZE_HI            0x05 /* High nibble (bit 0-3) */
#define IRCC_RX_SIZE_LO            0x06 /* Low byte */

#define IRCC_1152                  0x80
#define IRCC_CRC                   0x40

/* Register block 5 - IrDA */
#define IRCC_ATC					0x00
#define		IRCC_ATC_nPROGREADY		0x80
#define		IRCC_ATC_SPEED			0x40
#define		IRCC_ATC_ENABLE			0x20
#define		IRCC_ATC_MASK			0xE0


#define IRCC_IRHALFDUPLEX_TIMEOUT	0x01

#define IRCC_SCE_TX_DELAY_TIMER		0x02

/*
 * Other definitions
 */

#define SMSC_IRCC2_MAX_SIR_SPEED		115200
#define SMSC_IRCC2_FIR_CHIP_IO_EXTENT	8
#define SMSC_IRCC2_SIR_CHIP_IO_EXTENT	8
#define SMSC_IRCC2_FIFO_SIZE			16
#define SMSC_IRCC2_FIFO_THRESHOLD		64
/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
#define SMSC_IRCC2_RX_BUFF_TRUESIZE		14384
#define SMSC_IRCC2_TX_BUFF_TRUESIZE		14384
#define SMSC_IRCC2_MIN_TURN_TIME		0x07
#define SMSC_IRCC2_WINDOW_SIZE			0x07
/* Maximum wait for hw transmitter to finish */
#define SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US	1000	/* 1 ms */
/* Maximum wait for ATC transceiver programming to finish */
#define SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES 1
#endif /* SMSC_IRCC2_H */