configure

asterisk 是一个很有知名度开源软件

#include <sys/cdefs.h>
#ifdef __RENAME
  yes
#endif

EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "yes" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  CPPFLAGS="$CPPFLAGS '-D__RENAME(x)='"
fi
rm -f conftest*


cat > conftest.$ac_ext <<EOF
#line 1803 "configure"
#include "confdefs.h"
#include <sys/cdefs.h>
#ifdef _DIAGASSERT
  yes
#endif

EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "yes" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  CPPFLAGS="$CPPFLAGS '-D_DIAGASSERT(x)='"
fi
rm -f conftest*


# Check whether --enable-readline or --disable-readline was given.
if test "${enable_readline+set}" = set; then
  enableval="$enable_readline"
  if test "x$enable_readline" != "xyes" ; then
  enable_readline="no"
fi

else
  enable_readline="yes"

fi


# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
  enableval="$enable_debug"
  if test "x$enable_debug" != "xyes" ; then
  enable_debug="no"
fi

else
  enable_debug="no"

fi

if test "x$enable_debug" = "xyes" ; then
  CPPFLAGS="$CPPFLAGS -DDEBUG_TTY -DDEBUG_KEY -DDEBUG_READ -DDEBUG"
  CPPFLAGS="$CPPFLAGS -DDEBUG_REFRESH -DDEBUG_PASTE"
else
  CFLAGS="$CFLAGS -O"
fi



ACSRCS="common.c emacs.c vi.c"
BCSRCS="chared.c el.c hist.c key.c map.c parse.c prompt.c read.c refresh.c search.c sig.c term.c tty.c"
CCSRCS="$CCSRCS history.c tokenizer.c"

AGCSRCS="fcns.c help.c"
BGCSRCS="editline.c"

HDRS="chared.h el.h hist.h key.h map.h parse.h prompt.h refresh.h search.h sig.h sys.h term.h tokenizer.h tty.h"

IHDRS="histedit.h"

IHDR_LINKS=

AGHDRS="common.h emacs.h vi.h"
BGHDRS="fcns.h help.h"

HDR_DIRS="include"

MAN3="editline.3"
MAN5="editrc.5"

MAN3_LINKS=
for i in  el_init.3 el_end.3 el_reset.3 el_gets.3 el_getc.3 el_push.3 \
          el_parse.3 el_set.3 el_get.3 el_source.3 el_resize.3 el_line.3 \
	  el_insertstr.3 el_deletestr.3 history_init.3 history_end.3 \
	  history.3 ; do
  MAN3_LINKS="$MAN3_LINKS editline.3 $i"
done

MAN_DIRS="man/man3 man/man5"

LIB_DIRS="lib"
LIB_MAJOR="2"
LIB_MINOR="6"
LIB_A="libedit.a"
LIB_A_LINKS=

if test "x$ABI" = "xelf" ; then
  LIB_S="libedit.so.$LIB_MAJOR"
  LIB_S_LINK="libedit.so"
  LIB_S_LINKS="$LIB_S $LIB_S_LINK"
  S_LDFLAGS="-shared"
elif test "x$ABI" = "xaout" ; then
  LIB_S="libedit.so.$LIB_MAJOR.$LIB_MINOR"
  LIB_S_LINKS=
  S_LDFLAGS="-shared"
elif test "x$ABI" = "xmacho" ; then
  S_LDFLAGS="-shared"
  LIB_S="libedit.$LIB_MAJOR.dylib"
  LIB_S_LINK="libedit.dylib"
  LIB_S_LINKS="$LIB_S $LIB_S_LINK"
  if test "x$prefix" = "xNONE" ; then
    S_LDFLAGS="-undefined suppress -flat_namespace -dynamiclib -compatibility_version $LIB_MAJOR -current_version $LIB_MAJOR -install_name /usr/local/lib/$LIB_S"
  else
    S_LDFLAGS="-undefined suppress -flat_namespace -dynamiclib -compatibility_version $LIB_MAJOR -current_version $LIB_MAJOR -install_name $prefix/lib/$LIB_S"
  fi
fi

TEST="TEST/test"
TCSRCS="TEST/test.c"

if test "x$enable_readline" = "xyes" ; then
  CCSRCS="$CCSRCS readline.c"
  IHDRS="$IHDRS readline/readline.h"
  IHDR_LINKS="readline.h readline/history.h"
  HDR_DIRS="$HDR_DIRS include/readline"
  LIB_A_LINKS="$LIB_A_LINKS libedit.a libreadline.a"
  if test "x$ABI" = "xelf" ; then
    LIB_S_LINKS="$LIB_S_LINKS $LIB_S_LINK libreadline.so"
  elif test "x$ABI" = "xaout" ; then
    LIB_S_LINKS="$LIB_S_LINKS $LIB_S libreadline.so.$LIB_MAJOR.$LIB_MINOR"
  elif test "x$ABI" = "xmacho" ; then
    LIB_S_LINKS="$LIB_S_LINKS $LIB_S_LINK libreadline.dylib"
  fi
fi



























trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "Makefile makelist config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@CC@%$CC%g
s%@A_CFLAGS@%$A_CFLAGS%g
s%@S_CFLAGS@%$S_CFLAGS%g
s%@CPP@%$CPP%g
s%@AWK@%$AWK%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@RANLIB@%$RANLIB%g
s%@AR@%$AR%g
s%@ACSRCS@%$ACSRCS%g
s%@BCSRCS@%$BCSRCS%g
s%@CCSRCS@%$CCSRCS%g
s%@AGCSRCS@%$AGCSRCS%g
s%@BGCSRCS@%$BGCSRCS%g
s%@HDRS@%$HDRS%g
s%@IHDRS@%$IHDRS%g
s%@IHDR_LINKS@%$IHDR_LINKS%g
s%@AGHDRS@%$AGHDRS%g
s%@BGHDRS@%$BGHDRS%g
s%@HDR_DIRS@%$HDR_DIRS%g
s%@MAN3@%$MAN3%g
s%@MAN5@%$MAN5%g
s%@MAN3_LINKS@%$MAN3_LINKS%g
s%@MAN_DIRS@%$MAN_DIRS%g
s%@LIB_DIRS@%$LIB_DIRS%g
s%@LIB_VER@%$LIB_VER%g
s%@LIB_A@%$LIB_A%g
s%@LIB_A_LINKS@%$LIB_A_LINKS%g
s%@LIB_S@%$LIB_S%g
s%@LIB_S_LINKS@%$LIB_S_LINKS%g
s%@S_LDFLAGS@%$S_LDFLAGS%g
s%@TEST@%$TEST%g
s%@TCSRCS@%$TCSRCS%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile makelist"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.