long_term.c

asterisk 是一个很有知名度开源软件

/*
 * Copyright 1992 by Jutta Degener and Carsten Bormann, Technische
 * Universitaet Berlin.  See the accompanying file "COPYRIGHT" for
 * details.  THERE IS ABSOLUTELY NO WARRANTY FOR THIS SOFTWARE.
 */

/* $Header$ */

#include <stdio.h>
#include <assert.h>

#include "private.h"

#include "gsm.h"
#include "proto.h"
#ifdef K6OPT
#include "k6opt.h"
#endif
/*
 *  4.2.11 .. 4.2.12 LONG TERM PREDICTOR (LTP) SECTION
 */


/*
 * This module computes the LTP gain (bc) and the LTP lag (Nc)
 * for the long term analysis filter.   This is done by calculating a
 * maximum of the cross-correlation function between the current
 * sub-segment short term residual signal d[0..39] (output of
 * the short term analysis filter; for simplification the index
 * of this array begins at 0 and ends at 39 for each sub-segment of the
 * RPE-LTP analysis) and the previous reconstructed short term
 * residual signal dp[ -120 .. -1 ].  A dynamic scaling must be
 * performed to avoid overflow.
 */

 /* The next procedure exists in six versions.  First two integer
  * version (if USE_FLOAT_MUL is not defined); then four floating
  * point versions, twice with proper scaling (USE_FLOAT_MUL defined),
  * once without (USE_FLOAT_MUL and FAST defined, and fast run-time
  * option used).  Every pair has first a Cut version (see the -C
  * option to toast or the LTP_CUT option to gsm_option()), then the
  * uncut one.  (For a detailed explanation of why this is altogether
  * a bad idea, see Henry Spencer and Geoff Collyer, ``#ifdef Considered
  * Harmful''.)
  */

#ifndef  USE_FLOAT_MUL

#ifdef	LTP_CUT

static void Cut_Calculation_of_the_LTP_parameters P5((st, d,dp,bc_out,Nc_out),

	struct gsm_state * st,

	register word	* d,		/* [0..39]	IN	*/
	register word	* dp,		/* [-120..-1]	IN	*/
	word		* bc_out,	/* 		OUT	*/
	word		* Nc_out	/* 		OUT	*/
)
{
	register int  	k, lambda;
	word		Nc, bc;
	word		wt[40];

	longword	L_result;
	longword	L_max, L_power;
	word		R, S, dmax, scal, best_k;
	word		ltp_cut;

	register word	temp, wt_k;

	/*  Search of the optimum scaling of d[0..39].
	 */
	dmax = 0;
	for (k = 0; k <= 39; k++) {
		temp = d[k];
		temp = GSM_ABS( temp );
		if (temp > dmax) {
			dmax = temp;
			best_k = k;
		}
	}
	temp = 0;
	if (dmax == 0) scal = 0;
	else {
		assert(dmax > 0);
		temp = gsm_norm( (longword)dmax << 16 );
	}
	if (temp > 6) scal = 0;
	else scal = 6 - temp;
	assert(scal >= 0);

	/* Search for the maximum cross-correlation and coding of the LTP lag
	 */
	L_max = 0;
	Nc    = 40;	/* index for the maximum cross-correlation */
	wt_k  = SASR(d[best_k], scal);

	for (lambda = 40; lambda <= 120; lambda++) {
		L_result = (longword)wt_k * dp[best_k - lambda];
		if (L_result > L_max) {
			Nc    = lambda;
			L_max = L_result;
		}
	}
	*Nc_out = Nc;
	L_max <<= 1;

	/*  Rescaling of L_max
	 */
	assert(scal <= 100 && scal >= -100);
	L_max = L_max >> (6 - scal);	/* sub(6, scal) */

	assert( Nc <= 120 && Nc >= 40);

	/*   Compute the power of the reconstructed short term residual
	 *   signal dp[..]
	 */
	L_power = 0;
	for (k = 0; k <= 39; k++) {

		register longword L_temp;

		L_temp   = SASR( dp[k - Nc], 3 );
		L_power += L_temp * L_temp;
	}
	L_power <<= 1;	/* from L_MULT */

	/*  Normalization of L_max and L_power
	 */

	if (L_max <= 0)  {
		*bc_out = 0;
		return;
	}
	if (L_max >= L_power) {
		*bc_out = 3;
		return;
	}

	temp = gsm_norm( L_power );

	R = SASR( L_max   << temp, 16 );
	S = SASR( L_power << temp, 16 );

	/*  Coding of the LTP gain
	 */

	/*  Table 4.3a must be used to obtain the level DLB[i] for the
	 *  quantization of the LTP gain b to get the coded version bc.
	 */
	for (bc = 0; bc <= 2; bc++) if (R <= gsm_mult(S, gsm_DLB[bc])) break;
	*bc_out = bc;
}

#endif 	/* LTP_CUT */

static void Calculation_of_the_LTP_parameters P4((d,dp,bc_out,Nc_out),
	register word	* d,		/* [0..39]	IN	*/
	register word	* dp,		/* [-120..-1]	IN	*/
	word		* bc_out,	/* 		OUT	*/
	word		* Nc_out	/* 		OUT	*/
)
{
	register int  	k;
#ifndef K6OPT
	register int lambda;
#endif
	word		Nc, bc;
	word		wt[40];

	longword	L_max, L_power;
	word		R, S, dmax, scal;
	register word	temp;

	/*  Search of the optimum scaling of d[0..39].
	 */
	dmax = 0;

	for (k = 0; k <= 39; k++) {
		temp = d[k];
		temp = GSM_ABS( temp );
		if (temp > dmax) dmax = temp;
	}

	temp = 0;
	if (dmax == 0) scal = 0;
	else {
		assert(dmax > 0);
		temp = gsm_norm( (longword)dmax << 16 );
	}

	if (temp > 6) scal = 0;
	else scal = 6 - temp;

	assert(scal >= 0);

	/*  Initialization of a working array wt
	 */

	for (k = 0; k <= 39; k++) wt[k] = SASR( d[k], scal );

	/* Search for the maximum cross-correlation and coding of the LTP lag
	 */
# ifdef K6OPT
	L_max = k6maxcc(wt,dp,&Nc);
#	else
	L_max = 0;
	Nc    = 40;	/* index for the maximum cross-correlation */

	for (lambda = 40; lambda <= 120; lambda++) {

# undef STEP
#		define STEP(k) 	(longword)wt[k] * dp[k - lambda]

		register longword L_result;

		L_result  = STEP(0)  ; L_result += STEP(1) ;
		L_result += STEP(2)  ; L_result += STEP(3) ;
		L_result += STEP(4)  ; L_result += STEP(5)  ;
		L_result += STEP(6)  ; L_result += STEP(7)  ;
		L_result += STEP(8)  ; L_result += STEP(9)  ;
		L_result += STEP(10) ; L_result += STEP(11) ;
		L_result += STEP(12) ; L_result += STEP(13) ;
		L_result += STEP(14) ; L_result += STEP(15) ;
		L_result += STEP(16) ; L_result += STEP(17) ;
		L_result += STEP(18) ; L_result += STEP(19) ;
		L_result += STEP(20) ; L_result += STEP(21) ;
		L_result += STEP(22) ; L_result += STEP(23) ;
		L_result += STEP(24) ; L_result += STEP(25) ;
		L_result += STEP(26) ; L_result += STEP(27) ;
		L_result += STEP(28) ; L_result += STEP(29) ;
		L_result += STEP(30) ; L_result += STEP(31) ;
		L_result += STEP(32) ; L_result += STEP(33) ;
		L_result += STEP(34) ; L_result += STEP(35) ;
		L_result += STEP(36) ; L_result += STEP(37) ;
		L_result += STEP(38) ; L_result += STEP(39) ;

		if (L_result > L_max) {

			Nc    = lambda;
			L_max = L_result;
		}
	}
#	endif
	*Nc_out = Nc;

	L_max <<= 1;

	/*  Rescaling of L_max
	 */
	assert(scal <= 100 && scal >=  -100);
	L_max = L_max >> (6 - scal);	/* sub(6, scal) */

	assert( Nc <= 120 && Nc >= 40);

	/*   Compute the power of the reconstructed short term residual
	 *   signal dp[..]
	 */
	L_power = 0;
	for (k = 0; k <= 39; k++) {

		register longword L_temp;

		L_temp   = SASR( dp[k - Nc], 3 );
		L_power += L_temp * L_temp;
	}
	L_power <<= 1;	/* from L_MULT */

	/*  Normalization of L_max and L_power
	 */

	if (L_max <= 0)  {
		*bc_out = 0;
		return;
	}
	if (L_max >= L_power) {
		*bc_out = 3;
		return;
	}

	temp = gsm_norm( L_power );

	R = (word)SASR( L_max   << temp, 16 );
	S = (word)SASR( L_power << temp, 16 );

	/*  Coding of the LTP gain
	 */

	/*  Table 4.3a must be used to obtain the level DLB[i] for the
	 *  quantization of the LTP gain b to get the coded version bc.
	 */
	for (bc = 0; bc <= 2; bc++) if (R <= gsm_mult(S, gsm_DLB[bc])) break;
	*bc_out = bc;
}

#else	/* USE_FLOAT_MUL */

#ifdef	LTP_CUT

static void Cut_Calculation_of_the_LTP_parameters P5((st, d,dp,bc_out,Nc_out),
	struct gsm_state * st,		/*              IN 	*/
	register word	* d,		/* [0..39]	IN	*/
	register word	* dp,		/* [-120..-1]	IN	*/
	word		* bc_out,	/* 		OUT	*/
	word		* Nc_out	/* 		OUT	*/
)
{
	register int  	k, lambda;
	word		Nc, bc;
	word		ltp_cut;

	float		wt_float[40];
	float		dp_float_base[120], * dp_float = dp_float_base + 120;

	longword	L_max, L_power;
	word		R, S, dmax, scal;
	register word	temp;

	/*  Search of the optimum scaling of d[0..39].
	 */
	dmax = 0;

	for (k = 0; k <= 39; k++) {
		temp = d[k];
		temp = GSM_ABS( temp );
		if (temp > dmax) dmax = temp;
	}

	temp = 0;
	if (dmax == 0) scal = 0;
	else {
		assert(dmax > 0);
		temp = gsm_norm( (longword)dmax << 16 );
	}

	if (temp > 6) scal = 0;
	else scal = 6 - temp;

	assert(scal >= 0);
	ltp_cut = (longword)SASR(dmax, scal) * st->ltp_cut / 100; 


	/*  Initialization of a working array wt
	 */

	for (k = 0; k < 40; k++) {
		register word w = SASR( d[k], scal );
		if (w < 0 ? w > -ltp_cut : w < ltp_cut) {
			wt_float[k] = 0.0;
		}
		else {
			wt_float[k] =  w;
		}
	}
	for (k = -120; k <  0; k++) dp_float[k] =  dp[k];

	/* Search for the maximum cross-correlation and coding of the LTP lag
	 */
	L_max = 0;
	Nc    = 40;	/* index for the maximum cross-correlation */

	for (lambda = 40; lambda <= 120; lambda += 9) {

		/*  Calculate L_result for l = lambda .. lambda + 9.
		 */
		register float *lp = dp_float - lambda;

		register float	W;
		register float	a = lp[-8], b = lp[-7], c = lp[-6],
				d = lp[-5], e = lp[-4], f = lp[-3],
				g = lp[-2], h = lp[-1];
		register float  E; 
		register float  S0 = 0, S1 = 0, S2 = 0, S3 = 0, S4 = 0,
				S5 = 0, S6 = 0, S7 = 0, S8 = 0;

#		undef STEP
#		define	STEP(K, a, b, c, d, e, f, g, h) \
			if ((W = wt_float[K]) != 0.0) {	\
			E = W * a; S8 += E;		\
			E = W * b; S7 += E;		\
			E = W * c; S6 += E;		\
			E = W * d; S5 += E;		\
			E = W * e; S4 += E;		\
			E = W * f; S3 += E;		\
			E = W * g; S2 += E;		\
			E = W * h; S1 += E;		\
			a  = lp[K];			\
			E = W * a; S0 += E; } else (a = lp[K])

#		define	STEP_A(K)	STEP(K, a, b, c, d, e, f, g, h)
#		define	STEP_B(K)	STEP(K, b, c, d, e, f, g, h, a)
#		define	STEP_C(K)	STEP(K, c, d, e, f, g, h, a, b)
#		define	STEP_D(K)	STEP(K, d, e, f, g, h, a, b, c)
#		define	STEP_E(K)	STEP(K, e, f, g, h, a, b, c, d)
#		define	STEP_F(K)	STEP(K, f, g, h, a, b, c, d, e)
#		define	STEP_G(K)	STEP(K, g, h, a, b, c, d, e, f)
#		define	STEP_H(K)	STEP(K, h, a, b, c, d, e, f, g)

		STEP_A( 0); STEP_B( 1); STEP_C( 2); STEP_D( 3);
		STEP_E( 4); STEP_F( 5); STEP_G( 6); STEP_H( 7);

		STEP_A( 8); STEP_B( 9); STEP_C(10); STEP_D(11);
		STEP_E(12); STEP_F(13); STEP_G(14); STEP_H(15);

		STEP_A(16); STEP_B(17); STEP_C(18); STEP_D(19);
		STEP_E(20); STEP_F(21); STEP_G(22); STEP_H(23);

		STEP_A(24); STEP_B(25); STEP_C(26); STEP_D(27);
		STEP_E(28); STEP_F(29); STEP_G(30); STEP_H(31);

		STEP_A(32); STEP_B(33); STEP_C(34); STEP_D(35);
		STEP_E(36); STEP_F(37); STEP_G(38); STEP_H(39);

		if (S0 > L_max) { L_max = S0; Nc = lambda;     }
		if (S1 > L_max) { L_max = S1; Nc = lambda + 1; }
		if (S2 > L_max) { L_max = S2; Nc = lambda + 2; }
		if (S3 > L_max) { L_max = S3; Nc = lambda + 3; }
		if (S4 > L_max) { L_max = S4; Nc = lambda + 4; }
		if (S5 > L_max) { L_max = S5; Nc = lambda + 5; }
		if (S6 > L_max) { L_max = S6; Nc = lambda + 6; }
		if (S7 > L_max) { L_max = S7; Nc = lambda + 7; }
		if (S8 > L_max) { L_max = S8; Nc = lambda + 8; }

	}
	*Nc_out = Nc;

	L_max <<= 1;

	/*  Rescaling of L_max
	 */
	assert(scal <= 100 && scal >=  -100);
	L_max = L_max >> (6 - scal);	/* sub(6, scal) */

	assert( Nc <= 120 && Nc >= 40);

	/*   Compute the power of the reconstructed short term residual
	 *   signal dp[..]
	 */
	L_power = 0;
	for (k = 0; k <= 39; k++) {

		register longword L_temp;

		L_temp   = SASR( dp[k - Nc], 3 );
		L_power += L_temp * L_temp;
	}
	L_power <<= 1;	/* from L_MULT */

	/*  Normalization of L_max and L_power
	 */

	if (L_max <= 0)  {
		*bc_out = 0;
		return;
	}
	if (L_max >= L_power) {
		*bc_out = 3;
		return;
	}

	temp = gsm_norm( L_power );

	R = SASR( L_max   << temp, 16 );
	S = SASR( L_power << temp, 16 );

	/*  Coding of the LTP gain
	 */

	/*  Table 4.3a must be used to obtain the level DLB[i] for the
	 *  quantization of the LTP gain b to get the coded version bc.
	 */
	for (bc = 0; bc <= 2; bc++) if (R <= gsm_mult(S, gsm_DLB[bc])) break;
	*bc_out = bc;
}

#endif /* LTP_CUT */