sim10.mdl

matlab源代码,适用于开发研究,带来很好的学习效果.

    Block {
      BlockType		      BusSelector
      MuxedOutput	      off
    }
    Block {
      BlockType		      Constant
      Value		      "1"
      VectorParams1D	      on
      OutDataTypeMode	      "Inherit from 'Constant value'"
      OutDataType	      "sfix(16)"
      ConRadixGroup	      "Use specified scaling"
      OutScaling	      "2^0"
      SampleTime	      "inf"
    }
    Block {
      BlockType		      Gain
      Gain		      "1"
      Multiplication	      "Element-wise(K.*u)"
      ParameterDataTypeMode   "Same as input"
      ParameterDataType	      "sfix(16)"
      ParameterScalingMode    "Best Precision: Matrix-wise"
      ParameterScaling	      "2^0"
      OutDataTypeMode	      "Same as input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      SignalConversion
      OverrideOpt	      off
    }
    Block {
      BlockType		      Inport
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      Interpolate	      on
    }
    Block {
      BlockType		      Outport
      Port		      "1"
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      OutputWhenDisabled      "held"
      InitialOutput	      "[]"
    }
    Block {
      BlockType		      SubSystem
      ShowPortLabels	      on
      Permissions	      "ReadWrite"
      PermitHierarchicalResolution "All"
      SystemSampleTime	      "-1"
      RTWFcnNameOpts	      "Auto"
      RTWFileNameOpts	      "Auto"
      SimViewingDevice	      off
      DataTypeOverride	      "UseLocalSettings"
      MinMaxOverflowLogging   "UseLocalSettings"
    }
    Block {
      BlockType		      Sum
      IconShape		      "rectangular"
      Inputs		      "++"
      InputSameDT	      on
      OutDataTypeMode	      "Same as first input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Terminator
    }
  }
  AnnotationDefaults {
    HorizontalAlignment	    "center"
    VerticalAlignment	    "middle"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    FontName		    "Helvetica"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  LineDefaults {
    FontName		    "Helvetica"
    FontSize		    9
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  System {
    Name		    "Sim10"
    Location		    [163, 154, 850, 521]
    Open		    on
    ModelBrowserVisibility  off
    ModelBrowserWidth	    200
    ScreenColor		    "white"
    PaperOrientation	    "landscape"
    PaperPositionMode	    "auto"
    PaperType		    "A4"
    PaperUnits		    "centimeters"
    ZoomFactor		    "100"
    ReportName		    "simulink-default.rpt"
    Block {
      BlockType		      SubSystem
      Name		      "Atomic Subsystem"
      Ports		      [2, 2]
      Position		      [370, 102, 470, 193]
      BackgroundColor	      "magenta"
      FontSize		      10
      TreatAsAtomicUnit	      on
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      DataTypeOverride	      "TrueDoubles"
      MinMaxOverflowLogging   "ForceOff"
      System {
	Name			"Atomic Subsystem"
	Location		[20, 234, 693, 606]
	Open			on
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"A4"
	PaperUnits		"centimeters"
	ZoomFactor		"100"
	Block {
	  BlockType		  Inport
	  Name			  "In1"
	  Position		  [80, 158, 125, 182]
	  BackgroundColor	  "cyan"
	  Port			  "1"
	  IconDisplay		  "Port number"
	  LatchInput		  off
	}
	Block {
	  BlockType		  Inport
	  Name			  "In2"
	  Position		  [85, 279, 130, 301]
	  BackgroundColor	  "cyan"
	  Port			  "2"
	  IconDisplay		  "Port number"
	  LatchInput		  off
	}
	Block {
	  BlockType		  BusCreator
	  Name			  "Bus\nCreator"
	  Ports			  [2, 1]
	  Position		  [515, 162, 520, 293]
	  ShowName		  off
	  DialogController	  "Simulink.DDGSource_Bus"
	  Inputs		  "2"
	  DisplayOption		  "bar"
	}
	Block {
	  BlockType		  BusSelector
	  Name			  "Bus\nSelector"
	  Ports			  [1, 2]
	  Position		  [310, 120, 315, 220]
	  ShowName		  off
	  DialogController	  "Simulink.DDGSource_Bus"
	  OutputSignals		  "signal1,signal2"
	  Port {
	    PortNumber		    1
	    Name		    "<signal1>"
	    RTWStorageClass	    "Auto"
	    DataLoggingNameMode	    "SignalName"
	    ShowSigGenPortName	    on
	  }
	  Port {
	    PortNumber		    2
	    Name		    "<signal2>"
	    RTWStorageClass	    "Auto"
	    DataLoggingNameMode	    "SignalName"
	    ShowSigGenPortName	    on
	  }
	}
	Block {
	  BlockType		  BusSelector
	  Name			  "Bus\nSelector1"
	  Ports			  [1, 2]
	  Position		  [310, 237, 315, 343]
	  ShowName		  off
	  DialogController	  "Simulink.DDGSource_Bus"
	  OutputSignals		  "signal1,signal2"
	  Port {
	    PortNumber		    1
	    Name		    "<signal1>"
	    RTWStorageClass	    "Auto"
	    DataLoggingNameMode	    "SignalName"
	    ShowSigGenPortName	    on
	  }
	  Port {
	    PortNumber		    2
	    Name		    "<signal2>"
	    RTWStorageClass	    "Auto"
	    DataLoggingNameMode	    "SignalName"
	    ShowSigGenPortName	    on
	  }
	}
	Block {
	  BlockType		  Gain
	  Name			  "Gain"
	  Position		  [395, 296, 435, 334]
	  BackgroundColor	  "lightBlue"
	  ParameterDataTypeMode	  "Inherit via internal rule"
	  OutDataTypeMode	  "Inherit via internal rule"
	  SaturateOnIntegerOverflow off
	}
	Block {
	  BlockType		  SignalConversion
	  Name			  "Signal\nConversion"
	  Position		  [195, 142, 250, 198]
	  BackgroundColor	  "magenta"
	  FontSize		  10
	  ConversionOutput	  "Bus copy"
	}
	Block {
	  BlockType		  Sum
	  Name			  "Sum"
	  Ports			  [2, 1]
	  Position		  [385, 175, 425, 215]
	  BackgroundColor	  "lightBlue"
	  ShowName		  off
	  IconShape		  "round"
	  Inputs		  "|++"
	  InputSameDT		  off
	  OutDataTypeMode	  "Inherit via internal rule"
	  SaturateOnIntegerOverflow off
	}
	Block {
	  BlockType		  Outport
	  Name			  "Out1"
	  Position		  [605, 133, 650, 157]
	  BackgroundColor	  "cyan"
	  IconDisplay		  "Port number"
	  BusOutputAsStruct	  off
	}
	Block {
	  BlockType		  Outport
	  Name			  "Out2"
	  Position		  [615, 219, 655, 241]
	  BackgroundColor	  "cyan"
	  Port			  "2"
	  IconDisplay		  "Port number"
	  BusOutputAsStruct	  off
	}
	Line {
	  Name			  "<signal1>"
	  Labels		  [0, 0]
	  SrcBlock		  "Bus\nSelector"
	  SrcPort		  1
	  DstBlock		  "Out1"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "In2"
	  SrcPort		  1
	  DstBlock		  "Bus\nSelector1"
	  DstPort		  1
	}
	Line {
	  Name			  "<signal2>"
	  Labels		  [0, 0]
	  SrcBlock		  "Bus\nSelector"
	  SrcPort		  2
	  DstBlock		  "Sum"
	  DstPort		  1
	}
	Line {
	  Name			  "<signal1>"
	  Labels		  [0, 0]
	  SrcBlock		  "Bus\nSelector1"
	  SrcPort		  1
	  Points		  [85, 0]
	  DstBlock		  "Sum"
	  DstPort		  2
	}
	Line {
	  Name			  "<signal2>"
	  Labels		  [0, 0]
	  SrcBlock		  "Bus\nSelector1"
	  SrcPort		  2
	  DstBlock		  "Gain"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Sum"
	  SrcPort		  1
	  DstBlock		  "Bus\nCreator"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Gain"
	  SrcPort		  1
	  Points		  [0, -55]
	  DstBlock		  "Bus\nCreator"
	  DstPort		  2
	}
	Line {
	  SrcBlock		  "Bus\nCreator"
	  SrcPort		  1
	  DstBlock		  "Out2"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "In1"
	  SrcPort		  1
	  DstBlock		  "Signal\nConversion"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Signal\nConversion"
	  SrcPort		  1
	  DstBlock		  "Bus\nSelector"
	  DstPort		  1
	}
      }
    }
    Block {
      BlockType		      BusCreator
      Name		      "Bus\nCreator"
      Ports		      [2, 1]
      Position		      [240, 46, 245, 199]
      ShowName		      off
      DialogController	      "Simulink.DDGSource_Bus"
      Inputs		      "2"
      DisplayOption	      "bar"
    }
    Block {
      BlockType		      Terminator
      Name		      "Terminator"
      Position		      [504, 255, 536, 285]
      Orientation	      "down"
      BackgroundColor	      "lightBlue"
      NamePlacement	      "alternate"
      ShowName		      off
    }
    Block {
      BlockType		      Terminator
      Name		      "Termintr1"
      Position		      [539, 185, 571, 215]
      Orientation	      "down"
      BackgroundColor	      "lightBlue"
      NamePlacement	      "alternate"
      ShowName		      off
    }
    Block {
      BlockType		      Constant
      Name		      "a"
      Position		      [95, 63, 140, 107]
      BackgroundColor	      "cyan"
      ShowName		      off
      OutDataTypeMode	      "double"
    }
    Block {
      BlockType		      Constant
      Name		      "b"
      Position		      [95, 141, 140, 179]
      BackgroundColor	      "cyan"
      ShowName		      off
      OutDataTypeMode	      "int16"
    }
    Line {
      SrcBlock		      "a"
      SrcPort		      1
      DstBlock		      "Bus\nCreator"
      DstPort		      1
    }
    Line {
      SrcBlock		      "b"
      SrcPort		      1
      DstBlock		      "Bus\nCreator"
      DstPort		      2
    }
    Line {
      SrcBlock		      "Atomic Subsystem"
      SrcPort		      1
      Points		      [80, 0]
      DstBlock		      "Termintr1"
      DstPort		      1
    }
    Line {
      SrcBlock		      "Atomic Subsystem"
      SrcPort		      2
      Points		      [45, 0]
      DstBlock		      "Terminator"
      DstPort		      1
    }
    Line {
      SrcBlock		      "Bus\nCreator"
      SrcPort		      1
      Points		      [45, 0]
      Branch {
	DstBlock		"Atomic Subsystem"
	DstPort			1
      }
      Branch {
	Points			[0, 45]
	DstBlock		"Atomic Subsystem"
	DstPort			2
      }
    }
  }
}