📄 config.status
字号:
s,@VERSION@,0.6.3,;t t
s,@ACLOCAL@,aclocal-1.8,;t t
s,@AUTOCONF@,autoconf,;t t
s,@AUTOMAKE@,automake-1.8,;t t
s,@AUTOHEADER@,autoheader,;t t
s,@MAKEINFO@,makeinfo,;t t
s,@AMTAR@,tar,;t t
s,@install_sh@,/home/xiongly/pt900/gpe/xtscal-0.6.3/install-sh,;t t
s,@STRIP@,arm-linux-strip,;t t
s,@ac_ct_STRIP@,,;t t
s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t
s,@mkdir_p@,mkdir -p -- .,;t t
s,@AWK@,gawk,;t t
s,@SET_MAKE@,,;t t
s,@am__leading_dot@,.,;t t
s,@CC@,arm-linux-gcc,;t t
s,@CFLAGS@,-g -O2,;t t
s,@LDFLAGS@,,;t t
s,@CPPFLAGS@,,;t t
s,@ac_ct_CC@,,;t t
s,@EXEEXT@,,;t t
s,@OBJEXT@,o,;t t
s,@DEPDIR@,.deps,;t t
s,@am__include@,include,;t t
s,@am__quote@,,;t t
s,@AMDEP_TRUE@,,;t t
s,@AMDEP_FALSE@,#,;t t
s,@AMDEPBACKSLASH@,\,;t t
s,@CCDEPMODE@,depmode=gcc3,;t t
s,@am__fastdepCC_TRUE@,,;t t
s,@am__fastdepCC_FALSE@,#,;t t
s,@PKG_CONFIG@,/usr/bin/pkg-config,;t t
s,@XTSCAL_CFLAGS@,-DXTHREADS -DXUSE_MTSAFE_API -I/usr/local/arm-linux/include -I/usr/local/arm-linux/include/X11 -I/usr/local/arm-linux/include/freetype2 ,;t t
s,@XTSCAL_LIBS@,-L/usr/local/arm-linux/lib -L/usr/local/arm-linux/arm-linux/lib -lXft -lfreetype -lz -lfontconfig -lXrandr -lXext -lXrender -lX11 -ldl -lXcalibrate ,;t t
s,@LIBOBJS@,,;t t
s,@LTLIBOBJS@,,;t t
CEOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_lines=48
ac_sed_frag=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_lines # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
else
sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
fi
if test ! -s $tmp/subs.frag; then
ac_more_lines=false
else
# The purpose of the label and of the branching condition is to
# speed up the sed processing (if there are no `@' at all, there
# is no need to browse any of the substitutions).
# These are the two extra sed commands mentioned above.
(echo ':t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
else
ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
fi
ac_sed_frag=`expr $ac_sed_frag + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_lines`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
fi # test -n "$CONFIG_FILES"
for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
- | *:- | *:-:* ) # input from stdin
cat >$tmp/stdin
ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
*:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
* ) ac_file_in=$ac_file.in ;;
esac
# Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
case "$ac_dir" in
.) ac_abs_builddir=`pwd`;;
[\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
*) ac_abs_builddir=`pwd`/"$ac_dir";;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
case ${ac_top_builddir}. in
.) ac_abs_top_builddir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
*) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
case $ac_srcdir in
.) ac_abs_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
*) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
case $ac_top_srcdir in
.) ac_abs_top_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
*) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
esac;;
esac
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_builddir$INSTALL ;;
esac
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
if test x"$ac_file" = x-; then
configure_input=
else
configure_input="$ac_file. "
fi
configure_input=$configure_input"Generated from `echo $ac_file_in |
sed 's,.*/,,'` by configure."
# First look for the input files in the build tree, otherwise in the
# src tree.
ac_file_inputs=`IFS=:
for f in $ac_file_in; do
case $f in
-) echo $tmp/stdin ;;
[\\/$]*)
# Absolute (can't be DOS-style, as IFS=:)
test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
echo "$f";;
*) # Relative
if test -f "$f"; then
# Build tree
echo "$f"
elif test -f "$srcdir/$f"; then
# Source tree
echo "$srcdir/$f"
else
# /dev/null tree
{ { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
fi;;
esac
done` || { (exit 1); exit 1; }
if test x"$ac_file" != x-; then
{ echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
rm -f "$ac_file"
fi
sed "/^[ ]*VPATH[ ]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[ ]*\):*/\1/;
s/:*$//;
s/^[^=]*=[ ]*$//;
}
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$ac_srcdir,;t t
s,@abs_srcdir@,$ac_abs_srcdir,;t t
s,@top_srcdir@,$ac_top_srcdir,;t t
s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
s,@builddir@,$ac_builddir,;t t
s,@abs_builddir@,$ac_abs_builddir,;t t
s,@top_builddir@,$ac_top_builddir,;t t
s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
s,@INSTALL@,$ac_INSTALL,;t t
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
rm -f $tmp/stdin
if test x"$ac_file" != x-; then
mv $tmp/out $ac_file
else
cat $tmp/out
rm -f $tmp/out
fi
done
#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_dest" : 'X\(//\)[^/]' \| \
X"$ac_dest" : 'X\(//\)$' \| \
X"$ac_dest" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
case "$ac_dir" in
.) ac_abs_builddir=`pwd`;;
[\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
*) ac_abs_builddir=`pwd`/"$ac_dir";;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
case ${ac_top_builddir}. in
.) ac_abs_top_builddir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
*) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
case $ac_srcdir in
.) ac_abs_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
*) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
case $ac_top_srcdir in
.) ac_abs_top_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
*) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
esac;;
esac
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named `Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# So let's grep whole file.
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
dirpart=`(dirname "$mf") 2>/dev/null ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
X"$mf" : 'X\(//\)$' \| \
X"$mf" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
else
continue
fi
grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
# Extract the definition of DEP_FILES from the Makefile without
# running `make'.
DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
test -z "$DEPDIR" && continue
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n -e '/^U = / s///p' < "$mf"`
test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
# We invoke sed twice because it is the simplest approach to
# changing $(DEPDIR) to its actual value in the expansion.
for file in `sed -n -e '
/^DEP_FILES = .*\\\\$/ {
s/^DEP_FILES = //
:loop
s/\\\\$//
p
n
/\\\\$/ b loop
p
}
/^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`(dirname "$file") 2>/dev/null ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$file" : 'X\(//\)[^/]' \| \
X"$file" : 'X\(//\)$' \| \
X"$file" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p $dirpart/$fdir
else
as_dir=$dirpart/$fdir
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
{ (exit 1); exit 1; }; }; }
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
;;
esac
done
{ (exit 0); exit 0; }
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -