opennetcf.drawing.xml

wince环境下

            </summary>
            <param name="flipX"></param>
            <param name="flipY"></param>
            <param name="outbmp"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBasicBitmapOps.Resize(System.UInt32,System.UInt32,System.Drawing.Imaging.PixelFormat,OpenNETCF.Drawing.Imaging.InterpolationHint,OpenNETCF.Drawing.Imaging.IBitmapImage@)">
            <summary>
            Resize the bitmap image
            </summary>
            <param name="newWidth"></param>
            <param name="newHeight"></param>
            <param name="pixelFormat"></param>
            <param name="hints"></param>
            <param name="outbmp"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBasicBitmapOps.Rotate(System.Single,OpenNETCF.Drawing.Imaging.InterpolationHint,OpenNETCF.Drawing.Imaging.IBitmapImage@)">
            <summary>
            Rotate the bitmap image by the specified angle
            </summary>
            <param name="angle"></param>
            <param name="hints"></param>
            <param name="outbmp"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBasicBitmapOps.AdjustBrightness(System.Single)">
            <summary>
            Adjust the brightness of the bitmap image
            </summary>
            <param name="percent"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBasicBitmapOps.AdjustContrast(System.Single,System.Single)">
            <summary>
            This method adjusts the contrast of an image by rescaling the pixel values in the range from 0 to 1 to the new range from shadow to highlight.
            The old pixel value 0 is mapped to the new pixel value of shadow and the old pixel value 1 is mapped to the new pixel value of highlight. All other old pixel values are mapped into the new range through linear interpolation.
            </summary>
            <param name="shadow">A FLOAT value that defines the value for pixels that are currently 0.</param>
            <param name="highlight">A FLOAT value that defines the value for pixels that are currently 1.</param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBasicBitmapOps.AdjustGamma(System.Single)">
            <summary>
            Adjust the gamma of the bitmap image
            </summary>
            <param name="gamma"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBitmapImage.GetSize(System.Drawing.Size@)">
            <summary>
            Get bitmap dimensions pixels
            </summary>
            <param name="size"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBitmapImage.GetPixelFormatID(System.Drawing.Imaging.PixelFormat@)">
            <summary>
            Get bitmap pixel format
            </summary>
            <param name="pixelFormat"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBitmapImage.LockBits(OpenNETCF.Drawing.Imaging.RECT,System.UInt32,System.Drawing.Imaging.PixelFormat,OpenNETCF.Drawing.Imaging.BitmapDataInternal@)">
            <summary>
            Access bitmap data the specified pixel format
             must support at least PIXFMT_DONTCARE and
             the canonical formats.
            </summary>
            <param name="rect"></param>
            <param name="flags"></param>
            <param name="pixelFormat"></param>
            <param name="lockedBitmapData"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBitmapImage.UnlockBits(OpenNETCF.Drawing.Imaging.BitmapDataInternal@)">
            <summary>
            
            </summary>
            <param name="lockedBitmapData"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBitmapImage.GetPalette(System.IntPtr@)">
            <summary>
            Set/get palette associated with the bitmap image
            Do not use directly. Use <c>ImageUtils.GetBitmapPalette</c> instead
            </summary>
            <param name="palette"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IBitmapImage.SetPalette(System.IntPtr)">
            <summary>
            Do not use directly. Use <c>ImageUtils.SetBitmapPalette</c> instead
            </summary>
            <param name="palette"></param>
            <returns></returns>
        </member>
        <member name="T:OpenNETCF.Drawing.Imaging.IImage">
            <summary>
            This is the basic interface to an image object. It allows applications to do the following: 
            Display the image onto a destination graphics context  
            Push image data into an image sink 
            Access image properties and metadata Decoded image objects and in-memory bitmap image objects support the IImage interface
            </summary>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImage.GetPhysicalDimension(System.Drawing.Size@)">
            <summary>
            Get the device-independent physical dimension of the image
             unit of 0.01mm
            </summary>
            <param name="size"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImage.GetImageInfo(OpenNETCF.Drawing.Imaging.ImageInfo@)">
            <summary>
            Get basic image info
            </summary>
            <param name="imageInfo"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImage.SetImageFlags(OpenNETCF.Drawing.Imaging.ImageFlags)">
            <summary>
            Set image flags
            </summary>
            <param name="flags"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImage.Draw(System.IntPtr,OpenNETCF.Drawing.Imaging.RECT,OpenNETCF.Drawing.Imaging.RECT)">
            <summary>
            Display the image a GDI device context
            </summary>
            <param name="hdc"></param>
            <param name="dstRect"></param>
            <param name="srcRect"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImage.PushIntoSink(OpenNETCF.Drawing.Imaging.IImageSink)">
            <summary>
            Push image data into an IImageSink
            </summary>
            <param name="sink"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImage.GetThumbnail(System.UInt32,System.UInt32,OpenNETCF.Drawing.Imaging.IImage@)">
            <summary>
            Get a thumbnail representation for the image object
            </summary>
            <param name="thumbWidth"></param>
            <param name="thumbHeight"></param>
            <param name="thumbImage"></param>
            <returns></returns>
        </member>
        <member name="T:OpenNETCF.Drawing.Imaging.IImageDecoder">
            <summary>
            This is a low-level interface to an image decoder object. 
            Many simple applications do not need to work with decoder objects directly and can work with 
            higher level decoded image objects instead. 
            More sophisticated applications can use the IImageDecoder interface to have finer control over the interaction with decoder objects.
            The IImageDecoder interface can support images with multiple frames. Multiframe images are accessed via multidimensional indices. 
            This interface can support an arbitrary number of dimensions in nonrectangular arrangements
            </summary>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.InitDecoder(OpenNETCF.Runtime.InteropServices.ComTypes.IStream,OpenNETCF.Drawing.Imaging.DecoderInitFlag)">
            <summary>
            Initialize the image decoder object
            </summary>
            <param name="stream"></param>
            <param name="flags"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.TerminateDecoder">
            <summary>
            Clean up the image decoder object
            </summary>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.BeginDecode(OpenNETCF.Drawing.Imaging.IImageSink,System.IntPtr)">
            <summary>
            Start decoding the current frame
            </summary>
            <param name="sink"></param>
            <param name="newPropSet"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.Decode">
            <summary>
            Continue decoding
            </summary>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.EndDecode(System.Int32)">
            <summary>
            Stop decoding the current frame
            </summary>
            <param name="statusCode"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.GetFrameDimensionsCount(System.UInt32@)">
            <summary>
            Query multi-frame dimensions
            </summary>
            <param name="count"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.GetFrameDimensionsList(System.Guid@,System.UInt32@)">
            <summary>
            Query multi-frame dimensions
            </summary>
            <param name="dimensionIDs"></param>
            <param name="count"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.GetFrameCount(System.Guid@,System.UInt32@)">
            <summary>
            Get number of frames for the specified dimension
            </summary>
            <param name="dimensionID"></param>
            <param name="count"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.SelectActiveFrame(System.Guid@,System.UInt32)">
            <summary>
            Select currently active frame
            </summary>
            <param name="dimensionID"></param>
            <param name="frameIndex"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.GetImageInfo(OpenNETCF.Drawing.Imaging.ImageInfo@)">
            <summary>
            Get basic information about the image
            </summary>
            <param name="imageInfo"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.GetThumbnail(System.UInt32,System.UInt32,OpenNETCF.Drawing.Imaging.IImage@)">
            <summary>
            Get image thumbnail
            </summary>
            <param name="thumbWidth"></param>
            <param name="thumbHeight"></param>
            <param name="thumbImage"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.QueryDecoderParam(System.Guid)">
            <summary>
            Query decoder parameters
            </summary>
            <param name="Guid"></param>
            <returns></returns>
        </member>
        <member name="M:OpenNETCF.Drawing.Imaging.IImageDecoder.SetDecoderParam(System.Guid,System.UInt32,System.IntPtr)">
            <summary>
            Set decoder parameters