snmp-notification-mib.txt

架設ROSE私服必備之物 ROSE數據庫

        "An element of a filter profile.

         Entries in the snmpNotifyFilterTable are created and
         deleted using the snmpNotifyFilterRowStatus object."
    INDEX {         snmpNotifyFilterProfileName,
            IMPLIED snmpNotifyFilterSubtree }
    ::= { snmpNotifyFilterTable 1 }

SnmpNotifyFilterEntry ::= SEQUENCE {
    snmpNotifyFilterSubtree           OBJECT IDENTIFIER,
    snmpNotifyFilterMask              OCTET STRING,
    snmpNotifyFilterType              INTEGER,
    snmpNotifyFilterStorageType       StorageType,
    snmpNotifyFilterRowStatus         RowStatus
}

snmpNotifyFilterSubtree OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The MIB subtree which, when combined with the corresponding
         instance of snmpNotifyFilterMask, defines a family of
         subtrees which are included in or excluded from the
         filter profile."
    ::= { snmpNotifyFilterEntry 1 }
snmpNotifyFilterMask OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The bit mask which, in combination with the corresponding
         instance of snmpNotifyFilterSubtree, defines a family of
         subtrees which are included in or excluded from the
         filter profile.

         Each bit of this bit mask corresponds to a
         sub-identifier of snmpNotifyFilterSubtree, with the
         most significant bit of the i-th octet of this octet
         string value (extended if necessary, see below)
         corresponding to the (8*i - 7)-th sub-identifier, and
         the least significant bit of the i-th octet of this
         octet string corresponding to the (8*i)-th
         sub-identifier, where i is in the range 1 through 16.

         Each bit of this bit mask specifies whether or not
         the corresponding sub-identifiers must match when
         determining if an OBJECT IDENTIFIER matches this
         family of filter subtrees; a '1' indicates that an
         exact match must occur; a '0' indicates 'wild card',
         i.e., any sub-identifier value matches.

         Thus, the OBJECT IDENTIFIER X of an object instance
         is contained in a family of filter subtrees if, for
         each sub-identifier of the value of
         snmpNotifyFilterSubtree, either:

           the i-th bit of snmpNotifyFilterMask is 0, or

           the i-th sub-identifier of X is equal to the i-th
           sub-identifier of the value of
           snmpNotifyFilterSubtree.

         If the value of this bit mask is M bits long and
         there are more than M sub-identifiers in the
         corresponding instance of snmpNotifyFilterSubtree,
         then the bit mask is extended with 1's to be the
         required length.

         Note that when the value of this object is the
         zero-length string, this extension rule results in
         a mask of all-1's being used (i.e., no 'wild card'),
         and the family of filter subtrees is the one
         subtree uniquely identified by the corresponding
         instance of snmpNotifyFilterSubtree."
    DEFVAL { ''H }
    ::= { snmpNotifyFilterEntry 2 }

snmpNotifyFilterType OBJECT-TYPE
    SYNTAX      INTEGER {
                    included(1),
                    excluded(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the family of filter subtrees
         defined by this entry are included in or excluded from a
         filter.  A more detailed discussion of the use of this
         object can be found in section 6. of [RFC2573]."
    DEFVAL { included }
    ::= { snmpNotifyFilterEntry 3 }

snmpNotifyFilterStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The storage type of this conceptual row."
    DEFVAL { nonVolatile }
    ::= { snmpNotifyFilterEntry 4 }

snmpNotifyFilterRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this conceptual row.

         To create a row in this table, a manager must
         set this object to either createAndGo(4) or
         createAndWait(5)."
    ::= { snmpNotifyFilterEntry 5 }

--
--
-- Conformance information

--
--
snmpNotifyCompliances OBJECT IDENTIFIER ::=
                                        { snmpNotifyConformance 1 }
snmpNotifyGroups      OBJECT IDENTIFIER ::=
                                        { snmpNotifyConformance 2 }

--
--
-- Compliance statements
--
--

snmpNotifyBasicCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for minimal SNMP entities which
         implement only SNMP Unconfirmed-Class notifications and
         read-create operations on only the snmpTargetAddrTable."
    MODULE SNMP-TARGET-MIB
        MANDATORY-GROUPS { snmpTargetBasicGroup }

        OBJECT snmpTargetParamsMPModel
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access is not required."

        OBJECT snmpTargetParamsSecurityModel
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access is not required."

        OBJECT snmpTargetParamsSecurityName
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access is not required."

        OBJECT snmpTargetParamsSecurityLevel
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access is not required."

        OBJECT snmpTargetParamsStorageType
        SYNTAX INTEGER {
            readOnly(5)
        }
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access is not required.
             Support of the values other(1), volatile(2),
             nonVolatile(3), and permanent(4) is not required."

        OBJECT snmpTargetParamsRowStatus
        SYNTAX INTEGER {
            active(1)
        }
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access to the
             snmpTargetParamsTable is not required.
             Support of the values notInService(2), notReady(3),
             createAndGo(4), createAndWait(5), and destroy(6) is
             not required."

    MODULE -- This Module
        MANDATORY-GROUPS { snmpNotifyGroup }

        OBJECT snmpNotifyTag
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access is not required."

        OBJECT snmpNotifyType
        SYNTAX INTEGER {
            trap(1)
        }
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access is not required.
             Support of the value notify(2) is not required."

        OBJECT snmpNotifyStorageType
        SYNTAX INTEGER {
            readOnly(5)
        }
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access is not required.
             Support of the values other(1), volatile(2),
             nonVolatile(3), and permanent(4) is not required."

        OBJECT snmpNotifyRowStatus
        SYNTAX INTEGER {
            active(1)
        }
        MIN-ACCESS    read-only
        DESCRIPTION
            "Create/delete/modify access to the
             snmpNotifyTable is not required.
             Support of the values notInService(2), notReady(3),
             createAndGo(4), createAndWait(5), and destroy(6) is
             not required."
    ::= { snmpNotifyCompliances 1 }

snmpNotifyBasicFiltersCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for SNMP entities which implement
         SNMP Unconfirmed-Class notifications with filtering, and
         read-create operations on all related tables."
    MODULE SNMP-TARGET-MIB
        MANDATORY-GROUPS { snmpTargetBasicGroup }
    MODULE -- This Module
        MANDATORY-GROUPS { snmpNotifyGroup,
                           snmpNotifyFilterGroup }
    ::= { snmpNotifyCompliances 2 }

snmpNotifyFullCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for SNMP entities which either
         implement only SNMP Confirmed-Class notifications, or both
         SNMP Unconfirmed-Class and Confirmed-Class notifications,
         plus filtering and read-create operations on all related
         tables."
    MODULE SNMP-TARGET-MIB
        MANDATORY-GROUPS { snmpTargetBasicGroup,
                           snmpTargetResponseGroup }
    MODULE -- This Module
        MANDATORY-GROUPS { snmpNotifyGroup,
                           snmpNotifyFilterGroup }
    ::= { snmpNotifyCompliances 3 }

snmpNotifyGroup OBJECT-GROUP
    OBJECTS {
        snmpNotifyTag,
        snmpNotifyType,
        snmpNotifyStorageType,
        snmpNotifyRowStatus
    }
    STATUS      current
    DESCRIPTION
        "A collection of objects for selecting which management

         targets are used for generating notifications, and the
         type of notification to be generated for each selected
         management target."
    ::= { snmpNotifyGroups 1 }

snmpNotifyFilterGroup OBJECT-GROUP
    OBJECTS {
        snmpNotifyFilterProfileName,
        snmpNotifyFilterProfileStorType,
        snmpNotifyFilterProfileRowStatus,
        snmpNotifyFilterMask,
        snmpNotifyFilterType,
        snmpNotifyFilterStorageType,
        snmpNotifyFilterRowStatus
    }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing remote configuration
         of notification filters."
    ::= { snmpNotifyGroups 2 }

END