host-resources-mib.txt

架設ROSE私服必備之物 ROSE數據庫

hrStorageAllocationFailures OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of requests for storage represented by
        this entry that could not be honored due to not enough
        storage.  It should be noted that as this object has a
        SYNTAX of Counter32, that it does not have a defined
        initial value.  However, it is recommended that this
        object be initialized to zero, even though management
        stations must not depend on such an initialization."
    ::= { hrStorageEntry 7 }

-- The Host Resources Device Group
--
-- The device group is useful for identifying and diagnosing the
-- devices on a system.  The hrDeviceTable contains common
-- information for any type of device.  In addition, some devices
-- have device-specific tables for more detailed information.  More
-- such tables may be defined in the future for other device types.

-- Registration point for device types, for use with hrDeviceType.

-- These are defined in the HOST-RESOURCES-TYPES module.
hrDeviceTypes             OBJECT IDENTIFIER ::= { hrDevice 1 }

hrDeviceTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrDeviceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of devices contained by the
        host."
    ::= { hrDevice 2 }

hrDeviceEntry OBJECT-TYPE
    SYNTAX     HrDeviceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one device contained by the
        host.  As an example, an instance of the hrDeviceType
        object might be named hrDeviceType.3"
    INDEX { hrDeviceIndex }
    ::= { hrDeviceTable 1 }

HrDeviceEntry ::= SEQUENCE {
        hrDeviceIndex           Integer32,
        hrDeviceType            AutonomousType,
        hrDeviceDescr           DisplayString,
        hrDeviceID              ProductID,
        hrDeviceStatus          INTEGER,
        hrDeviceErrors          Counter32
    }

hrDeviceIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A unique value for each device contained by the host.
        The value for each device must remain constant at
        least from one re-initialization of the agent to the
        next re-initialization."
    ::= { hrDeviceEntry 1 }

hrDeviceType OBJECT-TYPE
    SYNTAX     AutonomousType
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "An indication of the type of device.

        If this value is
        `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry
        exists in the hrProcessorTable which corresponds to
        this device.

        If this value is
        `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry
        exists in the hrNetworkTable which corresponds to this
        device.

        If this value is
        `hrDevicePrinter { hrDeviceTypes 5 }', then an entry
        exists in the hrPrinterTable which corresponds to this
        device.

        If this value is
        `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an
        entry exists in the hrDiskStorageTable which
        corresponds to this device."
    ::= { hrDeviceEntry 2 }

hrDeviceDescr OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A textual description of this device, including the
        device's manufacturer and revision, and optionally,
        its serial number."
    ::= { hrDeviceEntry 3 }

hrDeviceID OBJECT-TYPE
    SYNTAX     ProductID
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The product ID for this device."
    ::= { hrDeviceEntry 4 }

hrDeviceStatus OBJECT-TYPE
    SYNTAX     INTEGER {
                   unknown(1),
                   running(2),
                   warning(3),
                   testing(4),
                   down(5)

               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The current operational state of the device described
        by this row of the table.  A value unknown(1)
        indicates that the current state of the device is
        unknown.  running(2) indicates that the device is up
        and running and that no unusual error conditions are
        known.  The warning(3) state indicates that agent has
        been informed of an unusual error condition by the
        operational software (e.g., a disk device driver) but
        that the device is still 'operational'.  An example
        would be a high number of soft errors on a disk.  A
        value of testing(4), indicates that the device is not
        available for use because it is in the testing state.
        The state of down(5) is used only when the agent has
        been informed that the device is not available for any
        use."
    ::= { hrDeviceEntry 5 }

hrDeviceErrors OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of errors detected on this device.  It
        should be noted that as this object has a SYNTAX of
        Counter32, that it does not have a defined initial
        value.  However, it is recommended that this object be
        initialized to zero, even though management stations
        must not depend on such an initialization."
    ::= { hrDeviceEntry 6 }

hrProcessorTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrProcessorEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of processors contained by the
        host.

        Note that this table is potentially sparse: a
        (conceptual) entry exists only if the correspondent
        value of the hrDeviceType object is
        `hrDeviceProcessor'."
    ::= { hrDevice 3 }

hrProcessorEntry OBJECT-TYPE
    SYNTAX     HrProcessorEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one processor contained by
        the host.  The hrDeviceIndex in the index represents
        the entry in the hrDeviceTable that corresponds to the
        hrProcessorEntry.

        As an example of how objects in this table are named,
        an instance of the hrProcessorFrwID object might be
        named hrProcessorFrwID.3"
    INDEX { hrDeviceIndex }
    ::= { hrProcessorTable 1 }

HrProcessorEntry ::= SEQUENCE {
        hrProcessorFrwID            ProductID,
        hrProcessorLoad             Integer32
    }

hrProcessorFrwID OBJECT-TYPE
    SYNTAX     ProductID
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The product ID of the firmware associated with the
        processor."
    ::= { hrProcessorEntry 1 }

hrProcessorLoad OBJECT-TYPE
    SYNTAX     Integer32 (0..100)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The average, over the last minute, of the percentage
        of time that this processor was not idle.
        Implementations may approximate this one minute
        smoothing period if necessary."
    ::= { hrProcessorEntry 2 }

hrNetworkTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrNetworkEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of network devices contained
        by the host.

        Note that this table is potentially sparse: a
        (conceptual) entry exists only if the correspondent
        value of the hrDeviceType object is
        `hrDeviceNetwork'."
    ::= { hrDevice 4 }

hrNetworkEntry OBJECT-TYPE
    SYNTAX     HrNetworkEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one network device contained
        by the host.  The hrDeviceIndex in the index
        represents the entry in the hrDeviceTable that
        corresponds to the hrNetworkEntry.

        As an example of how objects in this table are named,
        an instance of the hrNetworkIfIndex object might be
        named hrNetworkIfIndex.3"
    INDEX { hrDeviceIndex }
    ::= { hrNetworkTable 1 }

HrNetworkEntry ::= SEQUENCE {
        hrNetworkIfIndex    InterfaceIndexOrZero
    }

hrNetworkIfIndex OBJECT-TYPE
    SYNTAX     InterfaceIndexOrZero
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of ifIndex which corresponds to this
        network device. If this device is not represented in
        the ifTable, then this value shall be zero."
    ::= { hrNetworkEntry 1 }

hrPrinterTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrPrinterEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of printers local to the host.

        Note that this table is potentially sparse: a
        (conceptual) entry exists only if the correspondent
        value of the hrDeviceType object is
        `hrDevicePrinter'."
    ::= { hrDevice 5 }

hrPrinterEntry OBJECT-TYPE
    SYNTAX     HrPrinterEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one printer local to the
        host.  The hrDeviceIndex in the index represents the
        entry in the hrDeviceTable that corresponds to the
        hrPrinterEntry.

        As an example of how objects in this table are named,
        an instance of the hrPrinterStatus object might be
        named hrPrinterStatus.3"
    INDEX { hrDeviceIndex }
    ::= { hrPrinterTable 1 }

HrPrinterEntry ::= SEQUENCE {
        hrPrinterStatus             INTEGER,
        hrPrinterDetectedErrorState OCTET STRING
    }

hrPrinterStatus OBJECT-TYPE
    SYNTAX     INTEGER {
                   other(1),
                   unknown(2),
                   idle(3),
                   printing(4),
                   warmup(5)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The current status of this printer device."
    ::= { hrPrinterEntry 1 }

hrPrinterDetectedErrorState OBJECT-TYPE
    SYNTAX     OCTET STRING
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object represents any error conditions detected
        by the printer.  The error conditions are encoded as
        bits in an octet string, with the following
        definitions:

             Condition         Bit #

             lowPaper              0

             noPaper               1
             lowToner              2
             noToner               3
             doorOpen              4
             jammed                5
             offline               6
             serviceRequested      7
             inputTrayMissing      8
             outputTrayMissing     9
             markerSupplyMissing  10
             outputNearFull       11
             outputFull           12
             inputTrayEmpty       13
             overduePreventMaint  14

        Bits are numbered starting with the most significant
        bit of the first byte being bit 0, the least
        significant bit of the first byte being bit 7, the
        most significant bit of the second byte being bit 8,
        and so on.  A one bit encodes that the condition was
        detected, while a zero bit encodes that the condition
        was not detected.

        This object is useful for alerting an operator to
        specific warning or error conditions that may occur,
        especially those requiring human intervention."
    ::= { hrPrinterEntry 2 }

hrDiskStorageTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrDiskStorageEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of long-term storage devices
        contained by the host.  In particular, disk devices
        accessed remotely over a network are not included
        here.

        Note that this table is potentially sparse: a
        (conceptual) entry exists only if the correspondent
        value of the hrDeviceType object is
        `hrDeviceDiskStorage'."
    ::= { hrDevice 6 }

hrDiskStorageEntry OBJECT-TYPE
    SYNTAX     HrDiskStorageEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one long-term storage device
        contained by the host.  The hrDeviceIndex in the index
        represents the entry in the hrDeviceTable that
        corresponds to the hrDiskStorageEntry. As an example,
        an instance of the hrDiskStorageCapacity object might
        be named hrDiskStorageCapacity.3"
    INDEX { hrDeviceIndex }
    ::= { hrDiskStorageTable 1 }

HrDiskStorageEntry ::= SEQUENCE {
        hrDiskStorageAccess         INTEGER,
        hrDiskStorageMedia          INTEGER,
        hrDiskStorageRemoveble      TruthValue,
        hrDiskStorageCapacity       KBytes
    }

hrDiskStorageAccess OBJECT-TYPE
    SYNTAX     INTEGER {
                   readWrite(1),
                   readOnly(2)