default.prm

MC9S12NE64串口与网络通信源代码

/*****************************************************************************/
/*                                             COPYRIGHT (c) MOTOROLA 2003   */
/* FILE NAME: _MC9S12NE64_FLAT.PRM                                           */
/*                                                                           */
/* PURPOSE: Example Linker file for building a non-banked Flash target.      */
/*                                                                           */
/* COMPILER:    Metrowerks                                                   */
/*                                                                           */
/* DESCRIPTION: Linker Parameter file for Metrowerks Code Warrior.           */
/*                                                                           */
/*                                                                           */
/*****************************************************************************/

NAMES  
END

SEGMENTS 
// Uncomment RAM segment based on BUFMAP setting
// 
//   RAM       = READ_WRITE 0x2180 TO 0x3FFE;     /* BUFMAP = 0 (128 byte) */
//   RAM       = READ_WRITE 0x2300 TO 0x3FFE;     /* BUFMAP = 1 (256 byte) */
//   RAM       = READ_WRITE 0x2600 TO 0x3FFE;     /* BUFMAP = 2 (512 byte) */
//   RAM       = READ_WRITE 0x2C00 TO 0x3FFE;     /* BUFMAP = 3 (1K) */
    RAM       = READ_WRITE 0x3200 TO 0x3Fc0;     /* BUFMAP = 4 (1.5K) */


    /*Add 'FILL 0x18 0xA7' command following FLASH memory space allocation to implement a TRAP interrupt service routine
      opcode in the unprogrammed memory locations. Example -> PAGE_XX = READ_ONLY 0x3X8000 TO 0x3XBFFF FILL 0x18 0xA7;*/
        
    /* unbanked FLASH ROM */
    ROM_4000 = READ_ONLY  0x4000 TO 0x7FFF;  /* 16K */
    ROM_8000 = READ_ONLY  0x8000 TO 0xBFFF;
    ROM_C000 = READ_ONLY  0xC000 TO 0xdeff; /* ~13K */ 
 //   SECURITY = READ_ONLY  0xFF00 TO 0xFF0F;    
//    ROM_FF10 = READ_ONLY  0xFF10 TO 0xFF7F;
//    PAGE_3C = READ_ONLY  0x3C8000 TO 0x3CBFFF;   
//    PAGE_3D = READ_ONLY  0x3D8000 TO 0x3DBFFF;   
END


PLACEMENT
    _PRESTART, STARTUP,
    ROM_VAR, STRINGS,
    NON_BANKED, DEFAULT_ROM,
    COPY                    INTO  ROM_4000,ROM_8000, ROM_C000;
 //                INTO  PAGE_3C, PAGE_3D, ROM_FF10; 
    DEFAULT_RAM             INTO  RAM;
END

//STACKSIZE 0x200
//STACKTOP 0x3Fd
STACKSIZE  0x0600

//VECTOR 0 _Startup /* set reset vector on _Startup */
//VECTOR ADDRESS 0xEFFE _Startup