lm3s_emac.h

此源码是在LM3S6000系列上的WEBSERVER源码,欢迎测试...

/*----------------------------------------------------------------------------
 *      R T L  -  T C P N E T
 *----------------------------------------------------------------------------
 *      Name:    LM3S_EMAC.H
 *      Purpose: Luminary Micro LM3S8262 EMAC Ethernet Controller definitions
 *      Rev.:    V3.20
 *----------------------------------------------------------------------------
 *      This code is part of the RealView Run-Time Library.
 *      Copyright (c) 2004-2008 KEIL - An ARM Company. All rights reserved.
 *---------------------------------------------------------------------------*/

#ifndef __LM3S_EMAC_H
#define __LM3S_EMAC_H

/* EMAC Register Access Structure */
typedef struct {
   U32 ISR;                             /* Interrupt Status/Acknowledge      */
   U32 IEN;                             /* Interrupt Enable Mask             */
   U32 RXCTL;                           /* Receove Control                   */
   U32 TXCTL;                           /* Transmit Control                  */
   U32 DATA;                            /* TX/RX FIFO Data Access            */
   U32 IAR0;                            /* Individual Address Register 0     */
   U32 IAR1;                            /* Individual Address Register 1     */
   U32 THR;                             /* Threshold                         */
   U32 MCTL;                            /* Management Control                */
   U32 MCDIV;                           /* Management Clock Divider          */
   U32 MADR;                            /* Management Address                */
   U32 MTXD;                            /* Management Transmit Data          */
   U32 MRXD;                            /* Management Receive Data           */
   U32 RXFC;                            /* Number of RX Packets              */
   U32 TXRQ;                            /* Transimt Request                  */
   U32 TSEN;                            /* Timer Support Enable              */
} EMAC_Regs;

#define pEMAC   ((volatile EMAC_Regs *)ETH_BASE)
#define interrupt_ethernet  EthernetIntHandler

/* Interrupt Status/Acknowledge Register */
#define INT_RX              0x00000001  /* Receive Interrupt                 */
#define INT_TX_ERR          0x00000002  /* Transmit Error Interrupt          */
#define INT_TX_EMPTY        0x00000004  /* Transmit FIFO Empty Interrupt     */
#define INT_RX_OVR          0x00000008  /* Receive FIFO Overrun Interrupt    */
#define INT_RX_ERR          0x00000010  /* Receive Error Interrupt           */
#define INT_MII             0x00000020  /* Management MII TX/RX Done         */
#define INT_ALL             0x0000003F  /* All Interrupts Mask               */

/* Receive Control Register */
#define RXCTL_RX_EN         0x00000001  /* Enable Ethernet Receiver          */
#define RXCTL_MCAST_EN      0x00000002  /* Accept Multicast Packets          */
#define RXCTL_PROM_EN       0x00000004  /* Accept All Packets Mode           */
#define RXCTL_BAD_CRC       0x00000008  /* Reject Packets with Bad CRC       */
#define RXCTL_RST_FIFO      0x00000010  /* Reset Receive FIFO                */

/* Transmit Control Register */
#define TXCTL_TX_EN         0x00000001  /* Enable Ethernet Transmitter       */
#define TXCTL_PAD_EN        0x00000002  /* Enable Packet Padding             */
#define TXCTL_CRC_EN        0x00000004  /* Enable Generation of the CRC      */
#define TXCTL_DUP_EN        0x00000010  /* Enable Duplex Mode                */

/* MII Management Control Register */
#define MCTL_START          0x00000001  /* Start MII Tx/Rx Transaction       */
#define MCTL_WR             0x00000002  /* MII Write                         */
#define MCTL_REG_ADR        0x000000F8  /* MII Register Address Mask         */

#define MII_WR_TOUT         0x00050000  /* MII Write timeout count           */
#define MII_RD_TOUT         0x00050000  /* MII Read timeout count            */

/* Management Clock Divider */
#define MCDIV_MASK          0x000000FF  /* MII Data Clock Divider Mask       */

/* Management Transmit/Receive Data */
#define MTXD_MASK           0x0000FFFF  /* Management Transmit Data mask     */
#define MRXD_MASK           0x0000FFFF  /* Management Receive Data mask      */

/* Number of RX Packets */
#define RXFC_MASK           0x0000003F  /* Number of RX Packets in FIFO      */

/* Tramsmit Request */
#define TXRQ_NEW_TX         0x00000001  /* Start New Transmission            */

/* Timer Support */
#define TSEN_EN             0x00000001  /* Enable Timer Support              */

/* Embedded PHY Registers */
#define PHY_REG_CTRL        0x00        /* Basic Mode Control Register       */
#define PHY_REG_STAT        0x01        /* Basic Mode Status Register        */
#define PHY_REG_IDR1        0x02        /* PHY Identifier 1                  */
#define PHY_REG_IDR2        0x03        /* PHY Identifier 2                  */
#define PHY_REG_ANA         0x04        /* Auto-Negotiation Advertisement    */
#define PHY_REG_ANLPA       0x05        /* Auto-Neg. Link Partner Abitily    */
#define PHY_REG_ANE         0x06        /* Auto-Neg. Expansion Register      */
#define PHY_REG_VSP         0x10        /* Vendor Specific Register          */
#define PHY_REG_INT         0x11        /* Interrupt Control/Status Register */
#define PHY_REG_DIAG        0x12        /* Diagnostic Register               */
#define PHY_REG_TRANC       0x13        /* Transceiver Control               */
#define PHY_REG_LEDC        0x17        /* LED Configuration                 */
#define PHY_REG_MDIX        0x18        /* MDI/MDIX Control                  */

#define PHY_FULLD_100M      0x2100      /* Full Duplex 100Mbit               */
#define PHY_HALFD_100M      0x2000      /* Half Duplex 100Mbit               */
#define PHY_FULLD_10M       0x0100      /* Full Duplex 10Mbit                */
#define PHY_HALFD_10M       0x0000      /* Half Duplex 10MBit                */
#define PHY_AUTO_NEG        0x3000      /* Select Auto Negotiation           */

/* Misc */
#define PHY_DEF_ADR         0x0000      /* Default PHY device address        */

#endif

/*----------------------------------------------------------------------------
 * end of file
 *---------------------------------------------------------------------------*/