sect30.inc

瑞萨单片机测试程序:P9口流水灯测试,低电平点亮发光二极管.

;***************************************************************************
; C Compiler for R8C/Tiny, M16C/60,30,20,10
; Copyright(C) 1999(2000-2006). Renesas Technology Corp.
; and Renesas Solutions Corp., All rights reserved.
;
; sect30.inc : section definition for M16C family
;
; $Date: 2007/11/29 09:01:46 $
; $Revision: 1.1.4.1.8.1 $
;***************************************************************************

;=====================================================================
;
; 	Arrangement of section
;
;---------------------------------------------------------------------
; Near RAM data area
;---------------------------------------------------------------------
; SBDATA area
		.section	data_SE,DATA
		.org		400H
data_SE_top:

		.section	bss_SE,DATA,ALIGN
bss_SE_top:

		.section	data_SO,DATA
data_SO_top:

		.section	bss_SO,DATA
bss_SO_top:

; SBDATA area definition
		.glb		__SB__
__SB__	.equ		data_SE_top

; near RAM area
		.section	data_NE,DATA,ALIGN
data_NE_top:

		.section	bss_NE,DATA,ALIGN
bss_NE_top:

		.section	data_NO,DATA
data_NO_top:

		.section	bss_NO,DATA
bss_NO_top:

;---------------------------------------------------------------------
; Stack area
;---------------------------------------------------------------------
		.section	istack,DATA,ALIGN
		.blkb		__ISTACKSIZE__
istack_top:

.if __STACKSIZE__ != 0
		.section	stack,DATA,ALIGN
		.blkb		__STACKSIZE__
stack_top:
.endif

;---------------------------------------------------------------------
; heap section
;---------------------------------------------------------------------
.if __HEAPSIZE__ != 0
		.section	heap,DATA
heap_top:
		.blkb		__HEAPSIZE__
.endif

;---------------------------------------------------------------------
; Near ROM data area
;---------------------------------------------------------------------
.if __NEAR_ROM_FLG__ != 0
		.section	rom_NE,ROMDATA,ALIGN
rom_NE_top:

		.section	rom_NO,ROMDATA
rom_NO_top:
.endif

;---------------------------------------------------------------------
; Far RAM data area
;---------------------------------------------------------------------
.if __FAR_RAM_FLG__ != 0
		.section	data_FE,DATA
		.org		10000H
data_FE_top:

		.section	bss_FE,DATA,ALIGN
bss_FE_top:

		.section	data_FO,DATA
data_FO_top:

		.section	bss_FO,DATA
bss_FO_top:
.endif

;---------------------------------------------------------------------
; Far ROM data area
;---------------------------------------------------------------------
		.section	rom_FE,ROMDATA
		.org		__ROM_TOPADR__
rom_FE_top:

		.section	rom_FO,ROMDATA
rom_FO_top:

;---------------------------------------------------------------------
; Initial data of 'data' section
;---------------------------------------------------------------------
		.section	data_SEI,ROMDATA,ALIGN
data_SEI_top:

		.section	data_SOI,ROMDATA
data_SOI_top:

		.section	data_NEI,ROMDATA,ALIGN
data_NEI_top:
 
		.section	data_NOI,ROMDATA
data_NOI_top:

.if __FAR_RAM_FLG__ != 0
		.section	data_FEI,ROMDATA,ALIGN
data_FEI_top:

		.section	data_FOI,ROMDATA
data_FOI_top:
.endif

;---------------------------------------------------------------------
; Switch Table Section
;---------------------------------------------------------------------
;		.section	switch_table,ROMDATA
;switch_table_top:

;---------------------------------------------------------------------
; code area
;---------------------------------------------------------------------
		.section	program,CODE,ALIGN
		.section	interrupt,CODE,ALIGN
		.section	program_S,CODE,ALIGN

;---------------------------------------------------------------------
; variable vector section
;---------------------------------------------------------------------
		.section	vector,ROMDATA
		.org		__VECTOR_ADR__

.if	0
		.lword	dummy_int		; vector  0  BRK
		.lword	dummy_int		; vector  1
		.lword	dummy_int		; vector  2
		.lword	dummy_int		; vector  3
		.lword	dummy_int		; vector  4  (for user) int3
		.lword	dummy_int		; vector  5  (for user) timerB5
		.lword	dummy_int		; vector  6  (for user) timerB4
		.lword	dummy_int		; vector  7  (for user) timerB3
		.lword	dummy_int		; vector  8  (for user) si/o4/int5
		.lword	dummy_int		; vector  9  (for user) si/o3/int4
		.lword	dummy_int		; vector 10  (for user) Bus collision detection
		.lword	dummy_int		; vector 11  (for user) DMA0
		.lword	dummy_int		; vector 12  (for user) DMA1
		.lword	dummy_int		; vector 13  (for user) Key input interrupt
		.lword	dummy_int		; vector 14  (for user) A-D
		.lword	dummy_int		; vector 15  (for user) uart2 transmit
		.lword	dummy_int		; vector 16  (for user) uart2 receive
		.lword	dummy_int		; vector 17  (for user) uart0 transmit
		.lword	dummy_int		; vector 18  (for user) uart0 receive
		.lword	dummy_int		; vector 19  (for user) uart1 transmit
		.lword	dummy_int		; vector 20  (for user) uart1 receive
		.lword	dummy_int		; vector 21  (for user) timer A0
		.lword	dummy_int		; vector 22  (for user) timer A1
		.lword	dummy_int		; vector 23  (for user) timer A2
		.lword	dummy_int		; vector 24  (for user) timer A3
		.lword	dummy_int		; vector 25  (for user) timer A4
		.lword	dummy_int		; vector 26  (for user) timer B0
		.lword	dummy_int		; vector 27  (for user) timer B1
		.lword	dummy_int		; vector 28  (for user) timer B2
		.lword	dummy_int		; vector 29  (for user) int0
		.lword	dummy_int		; vector 30  (for user) int1
		.lword	dummy_int		; vector 31  (for user) int2
		.lword	dummy_int		; vector 32  (for user or MR30)
		.lword	dummy_int		; vector 33  (for user or MR30)
		.lword	dummy_int		; vector 34  (for user or MR30)
		.lword	dummy_int		; vector 35  (for user or MR30)
		.lword	dummy_int		; vector 36  (for user or MR30)
		.lword	dummy_int		; vector 37  (for user or MR30)
		.lword	dummy_int		; vector 38  (for user or MR30)
		.lword	dummy_int		; vector 39  (for user or MR30)
		.lword	dummy_int		; vector 40  (for user or MR30)
		.lword	dummy_int		; vector 41  (for user or MR30)
		.lword	dummy_int		; vector 42  (for user or MR30)
		.lword	dummy_int		; vector 43  (for user or MR30)
		.lword  dummy_int		; vector 44  (for user or MR30)
		.lword	dummy_int		; vector 45  (for user or MR30)
		.lword	dummy_int		; vector 46  (for user or MR30)
		.lword	dummy_int 		; vector 47  (for user or MR30)
		.lword	dummy_int 		; vector 48
		.lword	dummy_int 		; vector 49
		.lword	dummy_int 		; vector 50
		.lword	dummy_int 		; vector 51
		.lword	dummy_int 		; vector 52
		.lword	dummy_int 		; vector 53
		.lword	dummy_int 		; vector 54
		.lword	dummy_int 		; vector 55
		.lword	dummy_int 		; vector 56
		.lword	dummy_int 		; vector 57
		.lword	dummy_int 		; vector 58
		.lword	dummy_int 		; vector 59
		.lword	dummy_int 		; vector 60
		.lword	dummy_int 		; vector 61
		.lword	dummy_int 		; vector 62
		.lword	dummy_int 		; vector 63
.endif

;---------------------------------------------------------------------
; fixed vector section
;---------------------------------------------------------------------
		.section	fvector,ROMDATA
		.org		0fffdcH
UDI:
		.lword		dummy_int
OVER_FLOW:
		.lword		dummy_int
BRKI:
		.lword		dummy_int
ADDRESS_MATCH:
		.lword		dummy_int
SINGLE_STEP:
		.lword		dummy_int
WDT:
		.lword		dummy_int
DBC:
		.lword		dummy_int
NMI:
		.lword		dummy_int
RESET:
		.lword	start

;=====================================================================
; ID code & ROM code protect
;---------------------------------------------------------------------
; ID code check function
		.id "#FFFFFFFFFFFFFF"

; ROM code protect control address
		; .protect 00H

;=====================================================================
; Initialize Macro declaration
;---------------------------------------------------------------------
N_BZERO	.macro		TOP_,SECT_
		mov.b		#00H,R0L
		mov.w		#(TOP_ & 0FFFFH),A1
		mov.w		#sizeof SECT_,R3
		sstr.b
		.endm

N_BCOPY .macro		FROM_,TO_,SECT_
		mov.w		#(FROM_ & 0FFFFH),A0
		mov.b		#(FROM_ >> 16),R1H
		mov.w		#TO_,A1
		mov.w		#sizeof SECT_,R3
		smovf.b
		.endm

BZERO	.macro		TOP_,SECT_
		push.w		#sizeof SECT_ >> 16
		push.w		#sizeof SECT_  & 0ffffh
		pusha		TOP_ >> 16
		pusha		TOP_ & 0ffffh
		.stk		8
		.glb		_bzero
		.call		_bzero,G
		jsr.a		_bzero
		.endm

BCOPY	.macro		FROM_ ,TO_ ,SECT_
		push.w		#sizeof SECT_  >> 16
		push.w		#sizeof SECT_  & 0ffffh
		pusha		TO_ >> 16
		pusha		TO_  & 0ffffh
		pusha		FROM_ >> 16
		pusha		FROM_  & 0ffffh
		.stk		12
		.glb		_bcopy
		.call   	_bcopy,G
		jsr.a		_bcopy
		.endm

;***************************************************************************
;	C Compiler for R8C/Tiny, M16C/60,30,20,10
; Copyright(C) 1999(2000-2006). Renesas Technology Corp.
; and Renesas Solutions Corp., All rights reserved.
;***************************************************************************