91x_adc.c

a set or ARM9 examples by STM

      return RESET;
    }
  }
  else if(AdcReg == 0xC) /* The flag to check is in DR6 register */
  {
    if((ADC->DR6 & (1<<FlagPos))!= RESET)
    {
      return SET;
    }
    else
    {
      return RESET;
    }
  }
  else /* (AdcReg == 0xD), The flag to check is in DR7 register */
  {
    if((ADC->DR7 & (1<<FlagPos))!= RESET)
    {
      return SET;
    }
    else
    {
      return RESET;
    }
  }
}

/*******************************************************************************
* Function Name  : ADC_ClearFlag
* Description    : Clears the ADC Flag passed as a parameter.
* Input          : ADC_Flag: flag to clear.
*                  This parameter can be one of the following values:
*                     - ADC_FLAG_ECV: End of conversion status.
*                     - ADC_FLAG_AWD: Analog watchdog status.
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_ClearFlag(u16 ADC_Flag)
{  
  /* Clear the correspondent flag */
  ADC->CR |= (1<<(ADC_Flag & ADC_FLAG_MASK));
}

/*******************************************************************************
* Function Name  : ADC_GetConversionValue
* Description    : Read the result of conversion from the appropriate data 
*                  register.
* Input          : ADC_Channel: the correspondent channel of the ADC peripheral.
*                  This parameter can be one of the following values:
*                     - ADC_Channel_0: ADC channel 0.
*                     - ADC_Channel_1: ADC channel 1.
*                     - ADC_Channel_2: ADC channel 2.
*                     - ADC_Channel_3: ADC channel 3.
*                     - ADC_Channel_4: ADC channel 4.
*                     - ADC_Channel_5: ADC channel 5.
*                     - ADC_Channel_6: ADC channel 6.
*                     - ADC_Channel_7: ADC channel 7.
* Output         : None
* Return         : The result of the conversion for the specific channel.
*******************************************************************************/
u16 ADC_GetConversionValue(u16 ADC_Channel)
{
  u16 ADC_Conversion_Value = 0;

  switch (ADC_Channel)
  {
    case (ADC_Channel_0):
      /* Get the conversion value of the channel 0 */
      ADC_Conversion_Value = ADC->DR0 & ADC_RESULT_MASK;
      break;

    case (ADC_Channel_1):
      /* Get the conversion value of the channel 1 */
      ADC_Conversion_Value = ADC->DR1 & ADC_RESULT_MASK;
      break;

    case (ADC_Channel_2):
      /* Get the conversion value of the channel 2 */
      ADC_Conversion_Value = ADC->DR2 & ADC_RESULT_MASK;
      break;

    case (ADC_Channel_3):
      /* Get the conversion value of the channel 3 */
      ADC_Conversion_Value = ADC->DR3 & ADC_RESULT_MASK;
      break;

    case (ADC_Channel_4):
      /* Get the conversion value of the channel 4 */
      ADC_Conversion_Value = ADC->DR4 & ADC_RESULT_MASK;
      break;

    case (ADC_Channel_5):
      /* Get the conversion value of the channel 5 */
      ADC_Conversion_Value = ADC->DR5 & ADC_RESULT_MASK;
      break;
 
    case (ADC_Channel_6):
      /* Get the conversion value of the channel 6 */
      ADC_Conversion_Value = ADC->DR6 & ADC_RESULT_MASK;
      break;

    case (ADC_Channel_7):
      /* Get the conversion value of the channel 7 */
      ADC_Conversion_Value = ADC->DR7 & ADC_RESULT_MASK;
      break;

    default:
      break;
  }

  return(ADC_Conversion_Value);
}

/*******************************************************************************
* Function Name  : ADC_GetAnalogWatchdogResult
* Description    : Return the result of the comparaison on the selected Analog 
*                  Watchdog.
* Input          : ADC_Channel: the correspondent channel of the ADC peripheral.
*                  This parameter can be one of the following values:
*                     - ADC_Channel_0: ADC channel 0.
*                     - ADC_Channel_1: ADC channel 1.
*                     - ADC_Channel_2: ADC channel 2.
*                     - ADC_Channel_3: ADC channel 3.
*                     - ADC_Channel_4: ADC channel 4.
*                     - ADC_Channel_5: ADC channel 5.
*                     - ADC_Channel_6: ADC channel 6.
*                     - ADC_Channel_7: ADC channel 7.
* Output         : None
* Return         : The state of the comparision (SET or RESET).
*******************************************************************************/
FlagStatus ADC_GetAnalogWatchdogResult(u16 ADC_Channel)
{
  if (ADC->CRR & (1<<ADC_Channel) != RESET)
  {
      return SET;
  }
  else
  {
    return RESET;
  }
}

/*******************************************************************************
* Function Name  : ADC_ClearAnalogWatchdogResult
* Description    : Clear the result of the comparaison on the selected Analog 
*                  Watchdog.
* Input          : ADC_Channel: the correspondent channel of the ADC peripheral.
*                  This parameter can be one of the following values:
*                     - ADC_Channel_0: ADC channel 0.
*                     - ADC_Channel_1: ADC channel 1.
*                     - ADC_Channel_2: ADC channel 2.
*                     - ADC_Channel_3: ADC channel 3.
*                     - ADC_Channel_4: ADC channel 4.
*                     - ADC_Channel_5: ADC channel 5.
*                     - ADC_Channel_6: ADC channel 6.
*                     - ADC_Channel_7: ADC channel 7.
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_ClearAnalogWatchdogResult(u16 ADC_Channel)
{
  /* Clear the correspondent watchdog result */
  ADC->CRR = 1<<ADC_Channel;
}

/*******************************************************************************
* Function Name  : ADC_GetWatchdogThreshold
* Description    : Get the higher/lower thresholds values of the watchdog.
* Input          : ADC_Threshold: the lower or the higher threshold.
*                  This parameter can be one of the following values:
*                     - ADC_HigherThreshold: The higher threshold.
*                     - ADC_LowerThreshold: The lower threshold.
* Output         : None
* Return         : The selected threshold value.
*******************************************************************************/
u16 ADC_GetWatchdogThreshold(ADC_ThresholdType ADC_Threshold)
{
  u16 ADC_Threshold_Value = 0;

  switch (ADC_Threshold)
  {
    case ADC_LowThreshold:
      /* Get the low threshold of the watchdog */
      ADC_Threshold_Value = ADC->LTR;
      break;

    case ADC_HighThreshold:
      /* Get the high threshol of the watchdog */
      ADC_Threshold_Value = ADC->HTR;
      break;

    default:
      break;
  }

  return(ADC_Threshold_Value);
}

/*******************************************************************************
* Function Name  : ADC_ITConfig
* Description    : Enables or disables the specified ADC interrupts.
* Input          : - ADC_IT: specifies the ADC interrupts sources to be enabled 
*                    or disabled.
*                    This parameter can be one of the following values:
*                       - ADC_IT_EndOfConversion: End of conversion interrupt.
*                       - ADC_IT_AnalogWDG: Analog watchdog interrupt.
*                  - ADC_NewState: new state of the specified ADC interrupts.
*                    (ADC_Newstate can be ENABLE or DISABLE).
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_ITConfig(u16 ADC_IT, FunctionalState ADC_NewState)
{
  if (ADC_NewState == ENABLE)
  {
    /* Enable the interrupt */
    ADC->CR |= ADC_IT;
  }
  else
  {
    /* Disable the interrupt */
    ADC->CR &= ~ADC_IT;
  }
}

/*******************************************************************************
* Function Name  : ADC_StandbyModeCmd
* Description    : Enable or disable the standby mode.
* Input          : ADC_NewState: new state of the ADC standby mode.
*                  (ADC_Newstate can be ENABLE or DISABLE).
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_StandbyModeCmd(FunctionalState ADC_NewState)
{
  if (ADC_NewState == ENABLE)
  {
    /* Enable the standby mode */
    ADC->CR |= ADC_STANDBY_MODE_MASK;
  }
  else
  {
    /* Disable the standby mode */
    ADC->CR &= ~ADC_STANDBY_MODE_MASK;
  }
}

/*******************************************************************************
* Function Name  : ADC_Cmd
* Description    : Power on or put in reset mode the ADC peripheral.
* Input          : ADC_NewState: new state of the ADC peripheral.
*                  (ADC_Newstate can be ENABLE or DISABLE).
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_Cmd(FunctionalState ADC_NewState)
{
  if (ADC_NewState == ENABLE)
  {
    /* Enable the ADC */
    ADC->CR |= ADC_CMD_MASK;
  }
  else
  {
    /* Disable the ADC */
    ADC->CR &= ~ADC_CMD_MASK;
  }
}

/*******************************************************************************
* Function Name  : ADC_ConversionCmd
* Description    : Start or stop the ADC conversion in the selected mode.
* Input          : ADC_Conversion: the conversion command.
*                  This parameter can be one of the following values:
*                     - ADC_Conversion_Start: Start the conversion.
*                     - ADC_Conversion_Stop: Stop the Conversion.
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_ConversionCmd(u16 ADC_Conversion)
{
  if (ADC_Conversion == ADC_Conversion_Start)
  {
    /* Start the ADC conversion */
    ADC->CR |= ADC_Conversion_Start;
  }
  else
  {
    /* Stop the ADC conversion */
    ADC->CR &= ADC_Conversion_Stop;
  }
}

/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/