art_if.c

Atheros AP Test with Agilent N4010A source code

/* art_if.c -  contains the ART wrapper functions */

/* Copyright (c) 2000 Atheros Communications, Inc., All Rights Reserved */

#ifdef __ATH_DJGPPDOS__
#include <unistd.h>
#ifndef EILSEQ
	#define EILSEQ EIO
#endif	// EILSEQ

 #define __int64	long long
 #define HANDLE long
 typedef unsigned long DWORD;
 #define Sleep	delay
 #include <bios.h>
 #include "dk_structures.h"
 #include "dk_common.h"
 #include "common_hwext.h"
#endif	// #ifdef __ATH_DJGPPDOS__

#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <malloc.h>
#include "wlantype.h"
#include "wlanproto.h"
#include "athreg.h"
#include "manlib.h"
#include "test.h"
#include "dk_cmds.h"
#include "art_if.h"
#include "art_ani.h"
#ifndef __ATH_DJGPPDOS__
#include "MLIBif.h"
#ifdef LINUX
#include "sock_linux.h"
#else
#include "sock_win.h"
#endif
#else
#include "mlibif_dos.h"
#endif

#include "misc_routines.h"
//** the following added by ccshiang
#include "..\..\..\..\AgN4010WSODrv\AgN4010WSOAPI.h"
#include "..\..\..\..\ART.Common\AgiGlobalDefs.h"
//** the above added by ccshiang
extern A_BOOL thin_client;
extern A_BOOL usb_client;
extern A_BOOL sdio_client;
extern A_UINT32 sent_bytes;
extern A_UINT32 received_bytes;


extern MLD_CONFIG configSetup;
extern A_BOOL printLocalInfo;

// extern declarations for dut-golden sync
extern ART_SOCK_INFO *artSockInfo;
extern ART_SOCK_INFO *pArtPrimarySock;
extern ART_SOCK_INFO *pArtSecondarySock;

static A_UINT32 globalNumInstances = 0;

extern void *artConnect(void);
extern A_BOOL prepare2WayComms
(
 void
);

extern void cleanupSockMem
(
	void*			pOSSock,
	A_BOOL			closeSocket
);



// Error number and error string
A_INT32 art_mdkErrNo = 0;
A_CHAR art_mdkErrStr[SIZE_ERROR_BUFFER];
//  Remote error number and error string
A_INT32 remoteMdkErrNo = 0;
A_CHAR remoteMdkErrStr[SIZE_ERROR_BUFFER];
//static A_BOOL  ownSocketClose = 0;

// holds the cmd replies sent over channel
PIPE_CMD GlobalCmd;
CMD_REPLY cmdReply;

// forward function declaration
ART_SOCK_INFO *openCommsChannel(A_CHAR *machineName);

A_BOOL artSendCmd(PIPE_CMD *pCmdStruct,A_UINT32 cmdSize,void **returnCmdStruct);
A_BOOL receiveCmdReturn(A_UINT32 *pReturnLength);
A_UINT32 art_createEvent(A_UINT32 devNum,A_UINT32 type, A_UINT32 persistent,
						 A_UINT32 param1,A_UINT32 param2,A_UINT32 param3);


A_INT32  art_setupDevice(A_UINT32 whichDevice)
{
	A_UINT32 devNum;
	A_UINT32 *pRegValue;
	DK_DEV_INFO  *pdkInfo=NULL;
	A_UINT32 bootRomVer, bootRomMajVer, bootRomMinVer;

	//at setup time, remote flag being set, applies to primary ART session being AP
	if (configSetup.remote)
	{
		if(pArtPrimarySock == NULL) {
			//printf("****Machine Name :%s ********\n",configSetup.machName);
			artSockInfo = openCommsChannel(configSetup.machName);
			pArtPrimarySock = artSockInfo;
			if (artSockInfo == NULL) {
				uiPrintf("Error: Unable to open communications channel to AP!\n");
				return -1;
			}
		}
		if (strnicmp(configSetup.machName, "USB", 3) == 0) {
			whichDevice += USB_FN_DEV_START_NUM;
		}

		//if (thin_client)
		GlobalCmd.devNum = (A_UINT8)getNextDevNum();

		globalNumInstances++;
		GlobalCmd.cmdID = INIT_F2_CMD_ID;
		GlobalCmd.CMD_U.INIT_F2_CMD.whichF2 = whichDevice;
		if (!artSendCmd(&GlobalCmd,
			 sizeof(GlobalCmd.CMD_U.INIT_F2_CMD) + sizeof(GlobalCmd.cmdID),
			(void **)&pRegValue) )
		{
			uiPrintf("Error: Unable to send command to client! Handle not created.\n");
			return -1;
		}
		devNum = *pRegValue & 0x0fffffff;
		thin_client = (A_BOOL)((*pRegValue) >> 28);
		configSetup.remote_exec = !thin_client;

		if (!configSetup.remote_exec) {
		   pdkInfo = (DK_DEV_INFO *)(pRegValue+1);

#ifndef __ATH_DJGPPDOS__
		   devNum= setupDevice(whichDevice, pdkInfo, configSetup.remote);
#else
			devNum= setupDevice(whichDevice);
#endif
		   if (devNum == -1) {
				   uiPrintf("art_setupDevice::Error: invalid devNum from setupDevice\n");
			   return -1;
		   }
		   bootRomVer = (art_ap_reg_read(devNum, 0xbfc00878) & 0xffff);
		   bootRomMajVer = bootRomVer >> 8;
		   bootRomMinVer = bootRomVer & 0xff;
		   uiPrintf("Boot rom version %x.%x\n", bootRomMajVer, bootRomMinVer);
		   art_createEvent(devNum, ISR_INTERRUPT, 1, 0, 0, 0);
		}
	}
	if (!configSetup.remote)
	{
		#ifndef __ATH_DJGPPDOS__
		devNum= setupDevice(whichDevice, pdkInfo, configSetup.remote);
#else
			devNum= setupDevice(whichDevice);
#endif
		if (devNum == -1) {
			return -1;
		}
	}

	if(checkLibError(devNum, 1)) {
		return -1;
	}
	return devNum;
}



//#ifndef __ATH_DJGPPDOS__
/**************************************************************************
* create_event - Create an event
*
* RETURNS: The event handle for the event.
*/
A_UINT32 art_createEvent
(
	A_UINT32 devNum,
	A_UINT32 type,
	A_UINT32 persistent,
	A_UINT32 param1,
	A_UINT32 param2,
	A_UINT32 param3
)
{
	EVT_HANDLE		eventHdl;
	A_UINT16 devIndex;

		// check to see if we have a valid type
	if (ISR_INTERRUPT != type)
	{
		uiPrintf("Error: Illegal event type\n");
		return 0xffffffff;
	}

	eventHdl.eventID = 0;
	eventHdl.f2Handle = (A_UINT16)devNum;

	if (!configSetup.remote)
	{
			devIndex = (A_UINT16)dev2drv(devNum);
#ifndef __ATH_DJGPPDOS__
			if (!hwCreateEvent(devIndex, ISR_INTERRUPT, 1, 0, 0, 0, eventHdl)) return 0xffffffff;
#endif
	}
	else
	{

		GlobalCmd.devNum = (A_INT8) devNum;
		// create cmd to send
		GlobalCmd.cmdID		= CREATE_EVENT_CMD_ID;
		GlobalCmd.CMD_U.CREATE_EVENT_CMD.type	       = type;
		GlobalCmd.CMD_U.CREATE_EVENT_CMD.persistent    = persistent;
		GlobalCmd.CMD_U.CREATE_EVENT_CMD.param1	       = param1;
		GlobalCmd.CMD_U.CREATE_EVENT_CMD.param2	       = param2;
		GlobalCmd.CMD_U.CREATE_EVENT_CMD.param3	       = param3;
		GlobalCmd.CMD_U.CREATE_EVENT_CMD.eventHandle   = eventHdl;

		if (!artSendCmd(&GlobalCmd,
						sizeof(GlobalCmd.CMD_U.CREATE_EVENT_CMD)+sizeof(GlobalCmd.cmdID),
						NULL))
		{
				uiPrintf("Error: Unable to successfully send CREATE_EVENT command to client!\n");
				return 0xffffffff;
		}
	}

	return 0;
}
//#endif

/**************************************************************************
* cfg_read - User interface command for reading a pci configuration register
*
*
* RETURNS: value read
*/
A_UINT32 art_cfgRead
(
	A_UINT32 devNum,
	A_UINT32 regOffset
)
{
	 A_UINT32	     *pRegValue, regReturn;
	A_UINT16 devIndex;
	devIndex = (A_UINT16)dev2drv(devNum);

	//uiPrintf("SNOOP::art_cfgRead\n");

	if(!configSetup.remote)
	{
		if (thin_client) {
			#ifndef __ATH_DJGPPDOS__
			regReturn = hwCfgRead32(devIndex, regOffset);
			#endif
		}
		else {
			regReturn = OScfgRead(devNum, regOffset);
		}
		pRegValue = &regReturn;
	}
	else
	{
		/* create cmd structure and send command */
		GlobalCmd.devNum = (A_INT8) devNum;
		GlobalCmd.cmdID = CFG_READ_CMD_ID;
		GlobalCmd.CMD_U.CFG_READ_CMD.cfgReadAddr = regOffset;
		GlobalCmd.CMD_U.CFG_READ_CMD.readSize = 32;

		if(!artSendCmd(&GlobalCmd,
						sizeof(GlobalCmd.CMD_U.CFG_READ_CMD)+sizeof(GlobalCmd.cmdID),
					   (void **)&pRegValue))
		{
			uiPrintf("Error: Unable to successfully send CFG_READ command\n");
			return 0xdeadbeef;
		}
	}

	return(*pRegValue);
}

/**************************************************************************
* cfg_write - User interface command for writing a configuration register
*
*
* RETURNS: 1 if OK, 0 if error
*/
A_UINT32 art_cfgWrite
(
	A_UINT32 devNum,
	A_UINT32 regOffset,
	A_UINT32 regValue
)
{

	A_UINT16 devIndex = (A_UINT16)dev2drv(devNum);

  //  uiPrintf("SNOOP::art_cfgWrite\n");
	if (!configSetup.remote)
	{
			#ifndef __ATH_DJGPPDOS__
			hwCfgWrite32(devIndex, regOffset, regValue);
			#else
				OScfgWrite(devNum,regOffset,regValue );
			#endif

	}
	else
	{
		GlobalCmd.devNum = (A_INT8) devNum;
		/* create cmd structure and send command */
		GlobalCmd.cmdID = CFG_WRITE_CMD_ID;
		GlobalCmd.CMD_U.CFG_WRITE_CMD.cfgWriteAddr = regOffset;
		GlobalCmd.CMD_U.CFG_WRITE_CMD.cfgValue = regValue;
		GlobalCmd.CMD_U.CFG_WRITE_CMD.writeSize = 32;


		if(!artSendCmd(&GlobalCmd,
						sizeof(GlobalCmd.CMD_U.CFG_WRITE_CMD)+sizeof(GlobalCmd.cmdID),
						NULL))
		{
			uiPrintf("Error: Unable to successfully send CFG_WRITE command\n");
			return 0;
		}
	}
	return 1;
}

A_UINT32 mem_read_block_2048
(
	A_UINT32 devNum,
	 A_UINT32 physAddr,
	 A_UINT32 length,
	 A_UCHAR  *buf
)
{
	 A_UINT32        *pReadValues;
	A_UINT16 devIndex = (A_UINT16)dev2drv(devNum);

	 /* check to see if the size will make us bigger than the send buffer */
	 if (length > MAX_BLOCK_BYTES) {
		 uiPrintf("Error: block size too large, can only write %x bytes\n", MAX_BLOCK_BYTES);
		 return(0);
	 }

	if (!configSetup.remote) {
		 /* read the memory */
#ifndef __ATH_DJGPPDOS__
		 if(hwMemReadBlock(devIndex, buf,  physAddr, length) == -1) {
			uiPrintf("Failed call to hwMemWriteBlock()\n");
			return(0);
		 }
#else
		 uiPrintf(" Not Implemeted in DOS Version \n");
#endif
	  } else {

		GlobalCmd.devNum = (A_INT8) devNum;
		/* create cmd structure and send command */
		GlobalCmd.cmdID = MEM_READ_BLOCK_CMD_ID;
		GlobalCmd.CMD_U.MEM_READ_BLOCK_CMD.physAddr = physAddr;
		GlobalCmd.CMD_U.MEM_READ_BLOCK_CMD.length = length;


		if(!artSendCmd(&GlobalCmd,
						sizeof(GlobalCmd.CMD_U.MEM_READ_BLOCK_CMD)+sizeof(GlobalCmd.cmdID),
					   (void **)&pReadValues))
		{
			uiPrintf("Error: Unable to successfully send MEM_READ_BLOCK command to addr %x for % bytes\n", physAddr, length);
			return 0;
		}
		memcpy(buf, pReadValues, length);
	   }
   return(1);
}


/**************************************************************************
* mem_read - Command for read a block of memory
*
* RETURNS: value write
*/
A_UINT32 art_memRead
(
	A_UINT32 devNum,
	A_UINT32 physAddr,
	A_UCHAR  *bytesRead,
	A_UINT32 length
)
{
	A_UINT16 devIndex;
	A_UINT32 ii, startAddr_ii, len_ii, arrayStart_ii;
	A_UINT32 retAddr=0;

	//uiPrintf("SNOOP::art_memRead:physAddr=%x:length=%d\n", physAddr, length);

	devIndex = (A_UINT16)dev2drv(devNum);
	// Split the writes into blocks of 2048 bytes only if the memory is already allocated
	ii = length;
	startAddr_ii= physAddr;
	arrayStart_ii=0;

	while( ii > 0)
	{
		 if(ii > MAX_MEM_CMD_BLOCK_SIZE) {
				  len_ii = MAX_MEM_CMD_BLOCK_SIZE;
			  } else {
				  len_ii = ii;
			  }
			  if (!mem_read_block_2048(devNum, startAddr_ii, len_ii, ((A_UCHAR *)bytesRead+arrayStart_ii))) {
					  bytesRead = NULL;

			  }
			  startAddr_ii += len_ii;
			  ii -= len_ii;
			  arrayStart_ii += len_ii;
	}

	return 1;
}

A_UINT32 art_memAlloc
(
	A_UINT32 allocSize,       /* how many bytes to allocate */
	A_UINT32 physAddr,        /* requested physical address */
	A_UINT32 devNum  /* optionally change select new F2 */
)
{
	A_UINT32       *pAllocatedAddr, realAddr;
	A_UINT16 devIndex;
	devIndex = (A_UINT16)dev2drv(devNum);

	  pAllocatedAddr = &realAddr;

	  if (thin_client) {
			realAddr = memAlloc(devNum, allocSize);
		}
		else {
			if(!configSetup.remote || !configSetup.remote_exec) {
				  /* do the allocation */
#ifndef __ATH_DJGPPDOS__
				  realAddr = memAlloc(devNum, allocSize);
/*                  if(hwGetPhysMem(devIndex, allocSize, &realAddr) == NULL) {
					 return(0);
				  }
				  */
#else
				  uiPrintf("Not Implemented in DOS Version\n");
#endif
			 } else {
					GlobalCmd.devNum = (A_INT8) devNum;
					/* create the command structure for alloc */
					GlobalCmd.cmdID = MEM_ALLOC_CMD_ID;
					GlobalCmd.CMD_U.MEM_ALLOC_CMD.allocSize = allocSize;
					GlobalCmd.CMD_U.MEM_ALLOC_CMD.physAddr = physAddr;
					if(!artSendCmd(&GlobalCmd, sizeof(GlobalCmd.CMD_U.MEM_ALLOC_CMD)+sizeof(GlobalCmd.cmdID),
							 (void **)&pAllocatedAddr))  {
						uiPrintf("Error: Unable to successfully send MEM_ALLOC command\n");
						return(0);
					}
			  }
		}

	   // q_uiPrintf("Memory allocated at physical address %08lx\n", *pAllocatedAddr);

		/* no longer need to pass virtual address back to user, or keep it */
		return(*pAllocatedAddr);
}

void art_memFree (   A_UINT32 fAddr, A_UINT32 devNum  ) {

	  if (thin_client) {
			memFree(devNum, fAddr);
	  }

}

void art_memFreeAll (   A_UINT32 devNum  ) {

	  if (thin_client) {
			memFreeAll(devNum);
	  }

}

A_UINT32 mem_write_block_2048
(