custom_led_patterns.h

最新MTK手机软件源码

/*****************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2005
*
*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. 
*
*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/

/*****************************************************************************
 *
 * Filename:
 * ---------
 *   custom_led_patterns.h
 *
 * Project:
 * --------
 *   Maui_Software
 *
 * Description:
 * ------------
 *   The file contains definition of custom component module configuration
 *   variables, and routines handle for equipment device.
 *
 * Author:
 * -------
 * -------
 *
 *============================================================================
 *             HISTORY
 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *------------------------------------------------------------------------------
 * removed!
 *
 *------------------------------------------------------------------------------
 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *============================================================================
 ****************************************************************************/
#ifndef _UEM_LED_PATTERNS_H
#define _UEM_LED_PATTERNS_H

#define MAX_LED_GPIO       3    /* 3 LED lights */
#define MAX_LCD_BACKLIGHT  1    /* 1 backlight */
#define MAX_VIBRATOR       1    /* 1 vibrator */

typedef enum
{
    /* LED status pattern */
    LED_PATTERN_BEGIN,

    LED_POWER_ON = LED_PATTERN_BEGIN,
    LED_POWER_OFF,
    LED_BATTERY_WARNING,
    LED_BATTERY_LOW,
    LED_Connect900,
    LED_Connect1800,
    LED_OnCharging,
    LED_FullCharging,
    LED_MessageIn,
    LED_MessageRemind,
    LED_Caller1,
    LED_Caller2,
    LED_Caller3,
    LED_Caller4,
    LED_Caller5,
    LED_Caller6,
    LED_LimitService,
    LED_NoService,
    LED_Connect1900,
    LED_Roaming,
    LED_PATTERN_END = 50,

    /* lcd backlight pattern */
    LCD_PATTERN_BEGIN,
    LCD_PATTERN_1 = LCD_PATTERN_BEGIN,
    LCD_PATTERN_2,
    LCD_PATTERN_END = 100,

    /* vibrator pattern */
    VIB_PATTERN_BEGIN,
    VIB_PATTERN_1 = VIB_PATTERN_BEGIN,
    VIB_PATTERN_2,
    VIB_PATTERN_3,  /* Incomming SMS */
    VIB_PATTERN_END = 150,

    MAX_PATTERN_ID = VIB_PATTERN_END
} PATTERN_ID;

typedef enum
{
    PLAY_STOP,
    PLAY_REPEAT,
    PLAY_ONCE,
    MAX_PATTERN_TYPE = PLAY_ONCE
} PATTERN_TYPE;

typedef struct
{
    kal_uint8 gpio_control[MAX_LED_GPIO];
    kal_uint16 duration_time;   /* max time 65535 msec */
} LED_PATTERN_STRUCT;

typedef struct
{
    kal_uint8 gpio_control[MAX_LCD_BACKLIGHT];
    kal_uint16 duration_time;   /* max time 65535 msec */
} LCD_PATTERN_STRUCT;

typedef struct
{
    kal_uint8 gpio_control[MAX_VIBRATOR];
    kal_uint16 duration_time;   /* max time 65535 msec */
} VIB_PATTERN_STRUCT;

extern const LCD_PATTERN_STRUCT *custom_get_lcd_patterns(PATTERN_ID lcd_pattern_id);
extern const LED_PATTERN_STRUCT *custom_get_led_patterns(PATTERN_ID led_pattern_id);
extern const VIB_PATTERN_STRUCT *custom_get_vib_patterns(PATTERN_ID vib_pattern_id);
extern kal_bool uem_play_pattern(PATTERN_ID pattern_id, PATTERN_TYPE pattern_type);
extern const kal_uint8 custom_get_led_label(const kal_uint8 id);
extern const kal_uint8 custom_get_lcd_label(const kal_uint8 id);
extern const kal_uint8 custom_get_vib_label(const kal_uint8 id);

#endif /* _UEM_LED_PATTERNS_H */