bt_user_config.h

最新MTK手机软件源码

/*****************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2005
*
*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. 
*
*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/

/*****************************************************************************
 *
 * Filename:
 * ---------
 *   bt_user_config.h
 *
 * Project:
 * --------
 *   Maui_Software
 *
 * Description:
 * ------------
 *   The file contains all application feature type definition for 
 *   bluetooth application feature configuration.
 *
 * Author:
 * -------
 * -------
 *
  *==============================================================================
 *             HISTORY
 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! 
 *------------------------------------------------------------------------------
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 *------------------------------------------------------------------------------
 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! 
 *==============================================================================
 *******************************************************************************/

#include "bt_hw_define.h"       /* common header file for both HP and HCI solutions */

#if defined(__BTVCSR_HP__)

#include "kal_release.h"        /* Basic data type */
#include "uart_sw.h"

#define __BT_DEBUG__    /* Still in the develop stage, turn the __BT_DEBUG__ compile option on */

extern kal_uint8 MMIBT_DEF_MYBTADDR[];
extern kal_uint8 MMIBT_DEF_MYBTFNAME[];
extern kal_uint8 MMIBT_DEF_TRBTFNAME[];
extern kal_uint32 BT_INQ_TOUT_DUR;
extern kal_uint32 BT_RING_TOUT_DUR;
extern kal_uint32 BT_CMD_GUARD_TIMER_DUR;
extern kal_uint32 BT_MAKE_IDLE_STATE_TIMER_DUR;
extern kal_uint8 CUST_MAX_INQ_NUM;
extern kal_uint8 CUST_MAX_TRU_NUM;
extern kal_uint8 BT_PWRON_MAX_STEPCOUNT;
extern kal_uint8 BT_TIMEOUT_VALUE;
extern kal_uint32 BT_SUPPORTED_PROF;

extern UART_PORT BT_GetPort_Setting(UARTDCBStruct *DCB);
extern kal_uint8 BT_GetResetGpio(void);
extern kal_uint8 BT_GetDscGpio(void);
extern kal_uint8 BT_GetPowerGpio(void);
extern kal_uint8 BT_GetDataSelGpio(void);

extern void bt_pwron(void);
extern void bt_pwroff(void);

extern void BT_EINT_HISR(void);
extern void bt_register_hisr(void (*fp) (void));

/****************************************************/
/** For Debugging */
/** Write log file to filesystem */
/****************************************************/

#ifdef __BT_DEBUG__

#define BT_LOG_FOLDER   "D:\\BTLOG\\"
#define BT_LOG_FILENAME "BTlog_"
#define BT_LOG_FILEEXT "txt"
extern kal_bool BT_GetLogStatus(void);          /* BT_DEBUG */
extern void BT_SetLogStatus(kal_bool status);   /* BT_DEBUG */

#endif /* __BT_DEBUG__ */ 

/****************************************************/

/* END __BTVCSR_HP__ */

#elif defined(__BTVCSR_HCI_BCHS__)
#include "kal_release.h"        /* Basic data type */
#include "uart_sw.h"
#include "eint.h"

/***************************************************************************** 
* Define
*****************************************************************************/
#define BCHS_MAX_LINK_KEY  10   /* maximum number of link keys */

#define BCHS_MAX_MEM_SIZE  100*1024     /* maximum size of memory pool */

#define BCHS_WAKE_UP_TIME 5000  /* host wake up time */

#define BCHS_UART_LE_BAUD_RATE 38400    /* defaule UART baud rate for link establishment */

#define BCHS_WAKE_UP_INT_LEVEL LEVEL_LOW        /* level of host wake up */

/*
 * class of device 
 * Cellular        0X2C204
 * Cordless       0x2C208
 * Smart Phone 0x2C20C
 */
#define BCHS_CLASS_OF_DEVICE 0X2C204
#define BCHS_MAX_PT_RECORD_NUMBER 5

/* shall move to driver */

/***************************************************************************** 
* Extern Global Variable
*****************************************************************************/

extern kal_bool bchs_buildVersion;

extern kal_bool bchs_blueCore3ROM;

extern kal_uint16 bchs_baud;

extern kal_uint16 bchs_mhz;

extern kal_uint16 bchs_btNap;
extern kal_uint16 bchs_btUap;
extern kal_uint32 bchs_btLap;

extern kal_bool bchs_hostio_map_sco_pcm;

extern kal_bool bchs_hostio_map_sco_codec;

extern kal_uint16 bchs_codec_pio;

extern kal_uint16 bchs_ana_ftrim;

extern kal_uint16 bchs_pcm_min_cpu_clock;

extern kal_uint16 bchs_max_scos;

/* host wake up settings */
extern kal_uint16 bchs_wakeup_enable;       /* enable = 0x0001, disable = 0x0004 */
extern kal_uint16 bchs_wakeup_sleep_delay;  /* in milliseconds */
extern kal_uint16 bchs_wakeup_break_length; /* duration of wake up signals in milliseconds */
extern kal_uint16 bchs_wakeup_pause_length; /* duration between wake up signals in milliseconds */
extern kal_uint16 bchs_wakeup_signal;

extern kal_uint8 MMI_BT_DEF_HOST_BT_NAME[];

#endif /* __BTVCSR_HCI_BCHS__ */