rmmi_bt.h

最新MTK手机软件源码

/*****************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2005
*
*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. 
*
*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/

/*****************************************************************************
 * Filename:
 * ---------
 * rmmi_bt.h
 *
 * Description:
 * ------------
 *   This file implements the AT parser and command handler for Bluetooth.
 *
 * Author:
 * -------
 * -------
 *==============================================================================
 * 				HISTORY
 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! 
 *------------------------------------------------------------------------------
 * removed!
 *
 *------------------------------------------------------------------------------
 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! 
 *==============================================================================
 *
*****************************************************************************/

/********************************************************************************
*  Copyright Statement:
*  --------------------
*
*  This product has been developed using a protocol stack
*  developed by Sasken Communication Technologies Limited.
*
********************************************************************************/

#ifndef RMMI_BT_H
#define RMMI_BT_H

#ifdef __BT_SUPPORT__
#include "bt_user_config.h"
#endif
#include "uart_sw.h"

#define RMMI_BT_STATE_CHANGE(a) { \
	kal_trace(TRACE_GROUP_3, RMMI_BT_STATE_TRANS, RMMI_PTR->BT_action, RMMI_PTR->BT_action, a, a );\
	RMMI_PTR->BT_action = a;\
	}

#define RMMI_BT_LOG_STATE()  kal_trace(TRACE_GROUP_3, RMMI_BT_ACTION, RMMI_PTR->BT_action )


#ifdef __BT_DEBUG__
#define RMMI_BT_ASSERT(a) { \
	if(!a) l4c_bt_close_log_file(2); \
	ASSERT(a); \
	}
#else
#define RMMI_BT_ASSERT(a){\
	extern kal_bool g_mmi_frm_enable_debug_assert;\
	if(!a) l4c_bt_close_log_file(2); \
	do{if (g_mmi_frm_enable_debug_assert) ASSERT(a);} while(0);\
	}
#endif

#define RMMI_BT_MAX_FNAME_LEN 20
#define RMMI_BT_SCO_PROTECT_CNT 3
#define RMMI_BT_MAX_CMD_QUEUE_CNT 5

typedef struct {
	kal_uint8 index;
	kal_uint8 bd_addr[6];
}bt_trust_device_struct;

typedef struct _bt_cmd_struct{
	kal_uint8 *bt_cmd;
}bt_cmd_struct;

typedef struct _bt_cmd_queue_struct{
	kal_uint16 cmd_count;
	bt_cmd_struct bt_cmd_queue[RMMI_BT_MAX_CMD_QUEUE_CNT];
}bt_cmd_queue_struct;

typedef enum{
	BT_PAIR_COMPLETE,
	BT_PAIR_TIMEOUT,
	BT_PAIR_CANCEL,
	BT_PAIR_FAIL,
	BT_PAIR_NOT_FINISH
}bt_pin_verify_err_enum;

typedef enum{
	BT_NO_AUTH,
	BT_AUTH
}bt_authenticate_type_enum;

typedef enum{
	BT_PROF_RESERVED = 0,
	BT_PROF_HS = 1, 	//Audio Gateway
	BT_PROF_SPP= 2, 	//Serial port
	BT_PROF_DUN = 3, 	//Dial-up Networking
	BT_PROF_HF = 4, 	//Handsfree Profile
	BT_PROF_FAX = 5	//Fax Profile
}bt_profile_enum;

typedef enum{
	BT_RFC_CONN_COMPLETE,
	BT_RFC_CONN_TIMEOUT,
	BT_RFC_CONN_CANCEL,
	BT_RFC_CONN_DISCONN,
	BT_RFC_CONN_ABNORM,
	BT_RFC_CONN_REFUSED,
	BT_RFC_CONN_NOT_SUP,
	BT_RFC_CONN_FAILED
}bt_rfcomm_status_enum;

typedef enum{
	BT_SCO_CONN_COMPLETE,
	BT_SCO_CONN_TIMEOUT,
	BT_SCO_CONN_CANCEL,
	BT_SCO_CONN_DISCONN,
	BT_SCO_CONN_ABNORM,
	BT_SCO_CONN_REFUSED,
	BT_SCO_CONN_NOT_SUP,
	BT_SCO_CONN_FAIL
}bt_sco_status_enum;

typedef enum{
	BT_ERR_CONN_REQ_WHEN_NOT_IDLE,
	BT_ERR_PAIR_REQ_WHEN_NOT_IDLE,
	BT_ERR_CANCEL_REQ_WHEN_IDLE, 
	BT_ERR_DATA_REQ_WHEN_NOT_IDLE,
	BT_ERR_INQ_REQ_WHEN_NOT_IDLE,
	BT_ERR_SCO_CONNECTED,
	BT_ERR_DISCON_WHEN_NOT_CONN,
	BT_ERR_SM_DEVICE_DB_ERROR,
	BT_ERR_UNSUPPORTED,
	BT_WARNING_LOCAL_SNIFF_NOT_ENABLE,
	BT_WARNING_LOCAL_PARK_NOT_ENABLE,
	BT_WARNING_LOW_POWER_MODE_NOT_ENABLE,
	BT_WARNING_REMOTE_NOT_SUPPORT_SNIFF,
	BT_WARNING_REMOTE_NOT_SUPPORT_PARK,
	BT_WARNING_REMOTE_NOT_ENABLE_LOW_POWER,
	
	BT_ERR_RECOVERED = 99,

	BT_ERR_LAST
}bt_error_reason_enum;

typedef enum{
	BT_INQ_COMPLETE,
	BT_INQ_CANCEL,
	BT_INQ_MAX_RECV, 
	BT_INQ_NOT_FINISH
}bt_inq_status_enum;

typedef enum{
	BT_GATEWAY_UNKNOWN_ERROR,
       BT_GATEWAY_IDLE,
       BT_GATEWAY_CONNECTING = 6,
       BT_GATEWAY_CONNECTABLE,
       BT_GATEWAY_CONNECTED,
       BT_GATEWAY_DISCOVERBABLE,
       BT_GATEWAY_INQUIRING,
       BT_GATEWAY_HOST_INQUIRING_ALL,
       BT_GATEWAY_HOST_INQUIRING_AUDIO,
       BT_GATEWAY_PAIRING_AS_SLAVE,
       BT_GATEWAY_PAIRING_AS_MASTER,
       BT_GATEWAY_PAIRING_TO_DEVICE,
       BT_GATEWAY_PAIR_SUCCESSFUL,
       BT_GATEWAY_PAIR_UNSUCCESSFUL,
       BT_GATEWAY_CONNECT_PENDING
}bt_gateway_status_enum;

typedef enum{
		
   /* Power off */
   RMMI_BT_PWROFF,    /* 0 */
   
   /* Power on  Procedure */
	RMMI_BT_PWRON,
	RMMI_BT_PWRON_SETADDR,
	RMMI_BT_PWRON_SETNAME,
	RMMI_BT_PWRON_SETGFLAG,
	RMMI_BT_PWRON_SETHFPFEATURE,	
	RMMI_BT_PWRON_SETMAXTXPOWER,