windows xp registry tweaks.txt

黑客培训教程

Modify/Create String Value of Data type REG_SZ Named [LegalNoticeText]
Value Data for LegalNoticeText: [Type the Data for the Legal Notice]

Exit Registry / Reboot

15. Manage Internet Explorer Error Reporting

This tweak removes the IE Error Reporting tool from appearing with the option to send browser debugging reports to Microsoft.

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Main

Note:- Create both values listed below and set according to the bold type for the tweak to function properly.

Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonEnabled]
Value Data: [0 - Disabled / 1 - Enabled]

Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonDisabled] 
Value Data: [0 - Disabled / 1 - Enabled]

Exit Registry / Reboot

16. Customize Logon and Security Dialog Title

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\ CurrentVersion\Winlogon

Modify/Create String Value of Data type REG_SZ Named [Welcome]
Value Data: [0 = Disabled / 1 = Enabled]

Exit Registry / Reboot

17. Customize Logon Box Message

This is the message displayed on the Classic Logon box, not the XP ?Welcome? logon screen

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\ CurrentVersion\Winlogon

Modify/Create String Value of Data type REG_SZ Named [LogonPrompt]
Value Data: [Enter the text of the message]

Exit Registry / Reboot

18. Welcome Screen Logon Vs Classic Logon

This tweak specifies whether the Welcome screen or the Classic logon will be used to access Windows XP.

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

Modify/Create DWORD Value of Data type REG_DWORD Named [LogonType]
Value Data: [0 - Classic Mode / 1 - Welcome Screen]

Exit Registry / Reboot

19. QoS (Quality Of Service) Bandwidth Reserve Setting

By default, Windows XP reserves 20% of the connection bandwidth for QoS traffic. This tweak allows the setting to be altered to a different percentage of connection bandwidth. If the system uses more than a single adapter for network connections, each adapter may be set individually by navigating to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Psched\Parameters\Adapters\{Adpater-ID} rather than HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Psched

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Psched

Modify/Create DWORD Value of Data type REG_DWORD Named [NonBestEffortLimit]
Setting for Value Data: [Enter as a Percentage / Default Value = 20]

Exit Registry / Reboot

20. Enable/Disable Save Password in DUN

This tweak saves user passwords for Dial Up Networking so they do not have to be re-entered each session.

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\Parameters

Modify/Create DWORD Value of Data type REG_DWORD Named [DisableSavePassword]
Setting for Value Data: [0 = Disabled (Passwords Saved) / 1 = Enabled (Passwords Not Saved)]

Exit Registry / Reboot

21. Change the Registered Organization/Owner of Windows XP

This tweak allows modification of the registered owner and organization of the Windows XP software.

Note:- This tweak has nothing to do with Windows Product Activation (WPA) and will not allow you to register illegal XP software.

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion

Modify/Create String Value of Data type REG_SZ Named [RegisteredOrganization] or [RegisteredOwner]
Setting for Value Data: [Modify the Values to Reflect Current Information]

Exit Registry / Reboot

22. Remove Links Folder in Favorites

The Links folder is part of Favorites whether it's being accessed through Internet Explorer or the Favorites menu in the Start Menu. This tweak will remove it from those locations.

[Start] [Run] [Regedit]

Go to: HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Toolbar

Modify/Create String Value of Data type REG_SZ Named [LinksFolderName]
Value Data: [Set the String Value to a blank string]

Open Internet Explorer and manually delete the Links folder from Favorites Menu.
The Links folder will not be recreated.

Exit Registry / Reboot

23. Enable/Disable Active Window Tracking to Mouse Movements

When the mouse is moved over an open window it automatically sets the focus to that particular window. It does not bring the window to the foreground of the open windows.

[Start] [Run] [Regedit]

Go to: HKEY_CURRENT_USER\Control Panel\Mouse

Modify/Create DWORD Value of Data type REG_DWORD Named [ActiveWindowTracking]
Setting for Value Data: [0 = ActiveWindowTracking Disabled / 1 = ActiveWindowTracking Enabled]

Exit Registry / Reboot

24. Auto Disconnect for Internet Explorer

Use this edit to automatically disconnect from Internet Explorer after a specified length of time has elapsed. Use this trick on anyone whom you don?t like using your computer with net J 

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters

Modify/Create DWORD Value of Data type REG_DWORD Named [Autodisconnect]
Value Data: [Enter a new disconnect time. Use Hexadecimal if you are unfamiliar with Binary]

Exit Registry / Reboot

25. Auto Reboot on System Crash

By default, when the Windows XP operating system crashes an automatic reboot of the system occurs. While this behavior can be convenient, the downside is the error message accompanying the crash is not visible. Often times this information can be a great help in troubleshooting the source of the crash. This behavior can be modified in two ways; via the registry or using the System Properties property sheet.

[Start] [Run] [Regedit]

Registry Key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl

Modify/Create DWORD Value of Data type REG_DWORD Named [AutoReboot]
Setting for Value Data: [0 = AutoReboot Disabled / 1 = AutoReboot Enabled]

Exit Registry / Reboot

Open System Properties via Start > Control Panel > Performance and Maintenance > System

[System Properties may also be opened using the WinKey+Pause key combination]

Select the Advanced tab and then click Settings in the Startup and Recovery section

In System Failure section, clear the checkbox next to Automatically Restart

Click OK and OK to exit

26. Modify Control Panel Categories

Even if you like the new style for Control Panel, you might at times wish you could shift some items around into a different category. It's possible. 

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\{305CA226-D286-468e-B848-2B2E8E697B74} 2

Modify/Create DWORD Value of Data type REG_DWORD Named [Choose one of the applets with .cpl extension]

Setting for Value Data: [Select the value from table below]

Other Control Panel Options 0 
Appearance and Themes 1 
Printers and Other Hardware 2 
Network and Internet Connections 3 
Sounds, Speed, and Audio Devices 4 
Performance and Maintenance 5 
Date, Time, Language, and Regional Options 6 
Accessibility Options 7 
Add or Remove Programs 8 
User Accounts 9 

Exit Registry / Reboot

To further customize the items that appear in the new Control Panel, do a search of your system for all files that end in .cpl extension. If they aren't already listed, you can add them with a new DWORD value and then assign them to a category of your choosing.

27. Enable/Disable Run Commands Specific to the Registry

This tweak controls the use of the Run command on the local machine

[Start] [Run] [Regedit]

Go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\ Policies\Explorer

Create a DWORD value of Data Type REG_DWORD for each Run function that will be disabled.

Modify/Create the Value Name [DisableLocalMachineRun] 
Modify/Create the Value Name [DisableLocalMachineRunOnce] 

Modify/Create the Value Name [DisableCurrentUserRun] 
Modify/Create the Value Name [DisableCurrentUserRunOnce] 

Setting for Value Data: [0 = Disabled / 1 = Enabled]

Exit Registry / Reboot

28. Enable/Disable System Properties Access from My Computer

This tweak removes access to System Properties via My Computer as well as via Control Panel.

[Start] [Run] [Regedit]

Go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

Modify/Create DWORD Value of Data type REG_DWORD Named [NoPropertiesMyComputer]
Value Data: [0 - Display Properties / 1 - Hide Properties]

Exit Registry / Reboot

29. Uninstall Programs Manually

Just because Windows XP has the Add/Remove Programs feature it doesn't mean your application will appear in the list. Furthermore, even if it does appear, it's no guarantee that the uninstall feature will work. When you run across one of these situations the items listed below will help in getting rid of the application. Be aware that these steps may not remove everything associated with the application and can impact other applications on the computer. Have a backup or restore point and use caution.

Find the directory for the application and delete all the files in the directory. Delete the directory. 

Open regedit and navigate to HKEY_LOCAL_MACHINE\SOFTWARE and find the folder for the application. Delete the folder. 

Open regedit and navigate to HKEY_CURRENT_USER\SOFTWARE and find the folder for the application. Delete the folder. 

To remove the application entry from Add/Remove Programs (if present) open regedit and navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and find the folder for the application. Delete the folder. 

Some applications have Services attached to them. If this is the case, navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services, locate and delete the service. 

In Windows Explorer, navigate to the individual user settings and delete program references. Common places to check would be: 

C:\Documents and Settings\All Users\Start Menu\Programs and delete relevant entries.

C:\Documents and Settings\All Users\Start Menu\Programs\Startup and delete relevant entries.

C:\Documents and Settings\%YourUserID%\Start Menu\Programs and delete relevant entries.

[Do this for each User ID listed]