12864+遥控解码.c

74hc164键盘显示 红外控制DS1302 超级IO扫描 12864+遥控解码 1602+定时器 LCD1602+自定义图形

#include <reg52.h>
/* Define the register command code */
#define Disp_On  0x3f
#define Disp_Off 0x3e
#define Col_Add  0x40
#define Page_Add 0xb8
#define Start_Line 0xc0

#define Lcd_Bus P0  //MCU P0<------> LCM

sbit cs1=P2^6;    //Master chip enable
sbit cs2=P2^7;    //Slave chip enable
sbit Enable=P2^5; //6800 mode Enable single
sbit Di=P2^3;     //Data or Instrument Select
sbit RW=P2^4;     //Write or Read

sbit CLK1=P2^0;
sbit DAT1=P2^1;
sbit CLK2=P3^6;
sbit DAT2=P3^7;
sbit P3_0=P3^0;

bit flag=0;
unsigned char count=0,s_team=0,dm=0,a[4];
unsigned char getcode=0 ;
unsigned char code table[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};//共阴  
void display(long int shu,unsigned char wei);
void sendchar(unsigned char kdate);
void delay1ms(void); 

unsigned char code table0[][32]={
0x14,0x24,0x44,0x84,0x64,0x1C,0x20,0x18,0x0F,0xE8,0x08,0x08,0x28,0x18,0x08,0x00,/*--  文字:  欢  --*/
0x20,0x10,0x4C,0x43,0x43,0x2C,0x20,0x10,0x0C,0x03,0x06,0x18,0x30,0x60,0x20,0x00,
0x40,0x41,0xCE,0x04,0x00,0xFC,0x04,0x02,0x02,0xFC,0x04,0x04,0x04,0xFC,0x00,0x00,/*--  文字:  迎  --*/
0x40,0x20,0x1F,0x20,0x40,0x47,0x42,0x41,0x40,0x5F,0x40,0x42,0x44,0x43,0x40,0x00,
0x00,0x40,0x42,0x44,0x5C,0xC8,0x40,0x7F,0x40,0xC0,0x50,0x4E,0x44,0x60,0x40,0x00,/*--  文字:  光  --*/
0x00,0x80,0x40,0x20,0x18,0x07,0x00,0x00,0x00,0x3F,0x40,0x40,0x40,0x40,0x78,0x00,
0x00,0xF8,0x00,0x00,0xFE,0x40,0x30,0x8F,0x0A,0x08,0x18,0x68,0x08,0x88,0x08,0x00,/*--  文字:  临  --*/
0x00,0x1F,0x00,0x00,0x7F,0x00,0x00,0x7F,0x21,0x21,0x3F,0x21,0x21,0x7F,0x01,0x00,
0x10,0x61,0x06,0xC0,0x10,0xD0,0xFF,0x90,0x10,0xFC,0x24,0x24,0x24,0xFC,0x00,0x00,/*--  文字:  湘  --*/
0x04,0x04,0x7F,0x04,0x03,0x00,0x7F,0x00,0x00,0x7F,0x22,0x22,0x22,0x7F,0x00,0x00,
0x00,0x00,0x22,0x2A,0x2A,0x2A,0x2A,0xEA,0xAA,0x2A,0x2A,0xAA,0x7F,0x02,0x00,0x00,/*--  文字:  灵  --*/
0x00,0x80,0x40,0x44,0x23,0x10,0x0C,0x03,0x04,0x08,0x12,0x21,0x60,0x20,0x00,0x00,
0x00,0x00,0xF8,0x48,0x48,0x48,0x48,0xFF,0x48,0x48,0x48,0x48,0xF8,0x00,0x00,0x00,/*--  文字:  电  --*/
0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0x3F,0x44,0x44,0x44,0x44,0x4F,0x40,0x70,0x00,
0x00,0x00,0x02,0x02,0x02,0x02,0x02,0xE2,0x12,0x0A,0x06,0x02,0x00,0x80,0x00,0x00,/*--  文字:  子  --*/
0x01,0x01,0x01,0x01,0x01,0x41,0x81,0x7F,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,
0x00,0x00,0x02,0x02,0x02,0x02,0x02,0xFE,0x02,0x02,0x02,0x02,0x02,0x02,0x00,0x00,/*--  文字:  工  --*/
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00,
0x80,0x40,0x20,0xF8,0x07,0x22,0x18,0x0C,0xFB,0x48,0x48,0x48,0x68,0x48,0x08,0x00,/*--  文字:  作  --*/
0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0xFF,0x04,0x04,0x04,0x04,0x06,0x04,0x00,
0x00,0x10,0x2C,0x24,0xA4,0x64,0x25,0x26,0x24,0x24,0xA4,0x24,0x34,0x2C,0x04,0x00,/*--  文字:  室  --*/
0x40,0x40,0x48,0x49,0x49,0x49,0x49,0x7F,0x49,0x49,0x49,0x4B,0x48,0x40,0x40,0x00};

unsigned char code table1[][16]={
0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00, /*--  文字:  w  --*/
0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00, /*--  文字:  w  --*/
0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00, /*--  文字:  w  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00, /*--  文字:  .  --*/
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F, /*--  文字:  m  --*/
0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00, /*--  文字:  c  --*/
0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20, /*--  文字:  u  --*/
0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*--  文字:  l  --*/
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00, /*--  文字:  o  --*/
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00, /*--  文字:  v  --*/
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00, /*--  文字:  e  --*/
0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00, /*--  文字:  r  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00, /*--  文字:  .  --*/
0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20, /*--  文字:  n  --*/
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00, /*--  文字:  e  --*/
0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00};/*--  文字:  t  --*/

unsigned char code logo[]={ //开机画面-----湘灵电子工作室
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xF0,0xF8,
0x38,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0xC0,0xC0,
0xC0,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x03,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x07,0x03,0x01,0x01,0x01,
0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x83,0xFF,0x3F,0x07,0x02,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x7E,0xFF,0x78,0xF0,0xC0,0xC0,0x80,0x00,0x80,0xC0,0xE0,0xFF,0xFF,0xE0,
0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xF0,0x08,0x00,0x38,0x0C,0x02,
0x00,0x0C,0x87,0x81,0xC0,0xC0,0xC0,0xE0,0xE0,0xE0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,
0xF0,0xE0,0xE0,0xE0,0xC0,0xC0,0x80,0x00,0x00,0x80,0x87,0x83,0x82,0x83,0x83,0x83,
0x81,0x81,0x81,0x81,0x81,0x80,0x80,0x80,0xC1,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0xFF,0x01,
0x01,0x00,0x00,0x00,0xC0,0xF0,0x7C,0x0E,0x03,0x04,0xC0,0xE0,0xF0,0x78,0x3C,0x3E,
0x9F,0xCF,0xF7,0xF3,0xFF,0xFD,0xFD,0xFD,0xFC,0x9C,0xBC,0xFC,0xFC,0xFC,0xF8,0x00,
0x00,0x00,0x01,0x81,0xFF,0xFF,0xFF,0x7F,0x1C,0x01,0x01,0xC1,0x01,0x01,0x01,0x03,
0xFF,0xFF,0x03,0x01,0x01,0x01,0x01,0x81,0xC1,0x01,0x00,0x00,0x00,0x00,0x80,0xC0,
0x60,0x20,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x60,0xC0,0x00,0x00,0x00,0x00,0x80,
0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xF8,0x1C,0x07,
0x03,0x06,0x06,0x0C,0x0C,0x06,0x06,0x0C,0x78,0xF0,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x02,0x3F,0x0F,0x07,0x06,0x06,0xC2,0xE6,0x78,0x1C,0x0F,0x07,0xFF,0x3F,0x04,
0x00,0x00,0x00,0x3F,0x4F,0x00,0x00,0xF0,0xFC,0x1F,0x07,0x03,0x00,0x00,0x00,0x0E,
0x3F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0xBF,0xDF,0xDF,0xEF,0xE7,0x77,0x31,0x38,
0x1C,0x0E,0x0F,0x07,0x83,0x81,0x00,0x00,0x18,0x0E,0x0F,0x07,0x0C,0x0C,0x10,0x00,
0xEF,0xFF,0x70,0xE0,0xC0,0x00,0x07,0x03,0x00,0x00,0x08,0x3E,0x63,0x41,0x41,0x60,
0x20,0x60,0xC0,0x00,0x00,0x00,0xF8,0xCC,0x04,0x07,0x03,0x00,0x00,0xF0,0xFF,0x01,
0x00,0x31,0xFF,0x80,0xC0,0x7E,0x03,0x01,0x0F,0x0C,0x0C,0xFC,0x7F,0x63,0xE0,0x3E,
0x03,0x03,0x43,0x66,0x46,0x04,0x0C,0x88,0xF8,0x60,0x01,0x83,0xEE,0x38,0x00,0x00,
0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x31,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x3F,0x7C,0xF0,0xE2,0xC2,0xC4,0x84,0x84,
0x84,0x86,0x06,0x06,0x86,0x87,0x83,0x83,0x81,0xC1,0xC1,0xE0,0x60,0x70,0x30,0x18,
0x0C,0x04,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x60,0x38,
0x0F,0x01,0x00,0x00,0x01,0x07,0x0E,0x1C,0x38,0x70,0xE0,0x80,0x00,0x00,0x00,0x00,
0x70,0xF0,0x11,0x1F,0x1C,0x00,0x00,0x07,0x1C,0x18,0x08,0x18,0xF0,0x80,0x01,0x07,
0xFC,0x00,0x00,0xFF,0xFF,0x00,0x00,0xE1,0x31,0x21,0x33,0xCF,0x3C,0x27,0x63,0x26,
0x06,0x00,0x60,0x64,0x24,0x64,0xFC,0x1F,0x03,0x01,0x01,0x01,0x00,0x00,0x00,0x00,
0x00,0x00,0x3F,0xFF,0xFF,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0xFF,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x03,0x03,
0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x30,0x30,0x18,0x18,0x08,0x0C,0x04,0x06,0x03,0x01,0x01,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,
0x00,0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x01,0x00,0x00,0x00,
0x01,0x03,0x03,0x01,0x01,0x03,0x03,0x01,0x00,0x00,0x00,0x03,0x03,0x02,0x02,0x02,
0x02,0x02,0x02,0x02,0x02,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};

 


/*------------------延时子程序-----------------------------*/
void delay(unsigned int t)
{
    unsigned int i;
	unsigned char temp=0;
    for(i=0;i<t;i++)
    {    
      temp=getcode;
      display(temp,8);
    }  		
}

/*------------------延时子程序-----------------------------*/
void delaycom(unsigned int t)
{
    unsigned char i,j;
    for(i=0;i<t;i++)
    for(j=0;j<6;j++); 		
}

/*------------------写命令到LCD------------------------------*/
void write_com(unsigned char cmdcode)
{
    Di=0;RW=0;
    Lcd_Bus=cmdcode;delaycom(0);
    Enable=1;delaycom(0);
    Enable=0;
}

/*-------------------写数据到LCD----------------------------*/
void write_data(unsigned char Dispdata)
{
    Di=1;RW=0;
    Lcd_Bus=Dispdata;delaycom(0);
    Enable=1;delaycom(0);
    Enable=0;
}


void frame(void)     //画边框
{
    unsigned char i;
    
    cs1=1;cs2=1;
    write_com(Page_Add+0);
    write_com(Col_Add+0);
    for(i=0;i<64;i++) 
        write_data(0x01);

    write_com(Page_Add+7);
    write_com(Col_Add+0);

    for(i=0;i<64;i++) 
        write_data(0x80);

    for(i=0;i<8;i++)
    {
        cs1=0;cs2=1;
        write_com(Page_Add+i);
        write_com(Col_Add+63);
        write_data(0xff);

        cs1=1;cs2=0;
        write_com(Page_Add+i);
        write_com(Col_Add+0);
        write_data(0xff);
    }
}

/*--------------------------清除内存------------------------------*/
void Clr_Scr(void)
{
    unsigned char j,k;
    
    cs1=1;cs2=1;
    write_com(Page_Add+0);
    write_com(Col_Add+0);
    for(k=0;k<8;k++)
    {
        write_com(Page_Add+k);
        for(j=0;j<64;j++)
            write_data(0x00);
    }
}

/*--------------------------指定位置显示汉字16*16-----------------------*/
void hz_disp16(unsigned char pag,unsigned char col, unsigned char code *hzk)
{
    unsigned char j=0,i=0;
	if(col<64)