dct4.c

从FFMPEG转换而来的H264解码程序,VC下编译..

/* ***** BEGIN LICENSE BLOCK *****
 *
 * Portions Copyright (c) 1995-2005 RealNetworks, Inc. All Rights Reserved.
 *
 * The contents of this file, and the files included with this file,
 * are subject to the current version of the RealNetworks Public
 * Source License (the "RPSL") available at
 * http://www.helixcommunity.org/content/rpsl unless you have licensed
 * the file under the current version of the RealNetworks Community
 * Source License (the "RCSL") available at
 * http://www.helixcommunity.org/content/rcsl, in which case the RCSL
 * will apply. You may also obtain the license terms directly from
 * RealNetworks.  You may not use this file except in compliance with
 * the RPSL or, if you have a valid RCSL with RealNetworks applicable
 * to this file, the RCSL.  Please see the applicable RPSL or RCSL for
 * the rights, obligations and limitations governing use of the
 * contents of the file.
 *
 * This file is part of the Helix DNA Technology. RealNetworks is the
 * developer of the Original Code and owns the copyrights in the
 * portions it created.
 *
 * This file, and the files included with this file, is distributed
 * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY
 * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS
 * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES
 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET
 * ENJOYMENT OR NON-INFRINGEMENT.
 *
 * Technology Compatibility Kit Test Suite(s) Location:
 *    http://www.helixcommunity.org/content/tck
 *
 * Contributor(s):
 *
 * ***** END LICENSE BLOCK ***** */

/**************************************************************************************
 * Fixed-point HE-AAC decoder
 * Jon Recker ([e-mail]), Ken Cooke ([e-mail])
 * February 2005
 *
 * dct4.c - optimized DCT-IV
 **************************************************************************************/

#include "coder.h"
#include "assembly.h"

static const int nmdctTab[NUM_IMDCT_SIZES] = {128, 1024};
static const int postSkip[NUM_IMDCT_SIZES] = {15, 1};

/**************************************************************************************
 * Function:    PreMultiply
 *
 * Description: pre-twiddle stage of DCT4
 *
 * Inputs:      table index (for transform size)
 *              buffer of nmdct samples
 *
 * Outputs:     processed samples in same buffer
 *
 * Return:      none
 *
 * Notes:       minimum 1 GB in, 2 GB out, gains 5 (short) or 8 (long) frac bits
 *              i.e. gains 2-7= -5 int bits (short) or 2-10 = -8 int bits (long)
 *              normalization by -1/N is rolled into tables here (see trigtabs.c)
 *              uses 3-mul, 3-add butterflies instead of 4-mul, 2-add
 **************************************************************************************/
static void PreMultiply(int tabidx, int *zbuf1)
{
	int i, nmdct, ar1, ai1, ar2, ai2, z1, z2;
	int t, cms2, cps2a, sin2a, cps2b, sin2b;
	int *zbuf2;
	const int *csptr;

	nmdct = nmdctTab[tabidx];
	zbuf2 = zbuf1 + nmdct - 1;
	csptr = cos4sin4tab + cos4sin4tabOffset[tabidx];

	/* whole thing should fit in registers - verify that compiler does this */
	for (i = nmdct >> 2; i != 0; i--) {
		/* cps2 = (cos+sin), sin2 = sin, cms2 = (cos-sin) */
		cps2a = *csptr++;
		sin2a = *csptr++;
		cps2b = *csptr++;
		sin2b = *csptr++;

		ar1 = *(zbuf1 + 0);
		ai2 = *(zbuf1 + 1);
		ai1 = *(zbuf2 + 0);
		ar2 = *(zbuf2 - 1);

		/* gain 2 ints bit from MULSHIFT32 by Q30, but drop 7 or 10 int bits from table scaling of 1/M
		 * max per-sample gain (ignoring implicit scaling) = MAX(sin(angle)+cos(angle)) = 1.414
		 * i.e. gain 1 GB since worst case is sin(angle) = cos(angle) = 0.707 (Q30), gain 2 from
		 *   extra sign bits, and eat one in adding
		 */
		t  = MULSHIFT32(sin2a, ar1 + ai1);
		z2 = MULSHIFT32(cps2a, ai1) - t;
		cms2 = cps2a - 2*sin2a;
		z1 = MULSHIFT32(cms2, ar1) + t;
		*zbuf1++ = z1;	/* cos*ar1 + sin*ai1 */
		*zbuf1++ = z2;	/* cos*ai1 - sin*ar1 */

		t  = MULSHIFT32(sin2b, ar2 + ai2);
		z2 = MULSHIFT32(cps2b, ai2) - t;
		cms2 = cps2b - 2*sin2b;
		z1 = MULSHIFT32(cms2, ar2) + t;
		*zbuf2-- = z2;	/* cos*ai2 - sin*ar2 */
		*zbuf2-- = z1;	/* cos*ar2 + sin*ai2 */
	}
}

/**************************************************************************************
 * Function:    PostMultiply
 *
 * Description: post-twiddle stage of DCT4
 *
 * Inputs:      table index (for transform size)
 *              buffer of nmdct samples
 *
 * Outputs:     processed samples in same buffer
 *
 * Return:      none
 *
 * Notes:       minimum 1 GB in, 2 GB out - gains 2 int bits
 *              uses 3-mul, 3-add butterflies instead of 4-mul, 2-add
 **************************************************************************************/
static void PostMultiply(int tabidx, int *fft1)
{
	int i, nmdct, ar1, ai1, ar2, ai2, skipFactor;
	int t, cms2, cps2, sin2;
	int *fft2;
	const int *csptr;

	nmdct = nmdctTab[tabidx];
	csptr = cos1sin1tab;
	skipFactor = postSkip[tabidx];
	fft2 = fft1 + nmdct - 1;

	/* load coeffs for first pass
	 * cps2 = (cos+sin), sin2 = sin, cms2 = (cos-sin)
	 */
	cps2 = *csptr++;
	sin2 = *csptr;
	csptr += skipFactor;
	cms2 = cps2 - 2*sin2;

	for (i = nmdct >> 2; i != 0; i--) {
		ar1 = *(fft1 + 0);
		ai1 = *(fft1 + 1);
		ar2 = *(fft2 - 1);
		ai2 = *(fft2 + 0);

		/* gain 2 ints bit from MULSHIFT32 by Q30
		 * max per-sample gain = MAX(sin(angle)+cos(angle)) = 1.414
		 * i.e. gain 1 GB since worst case is sin(angle) = cos(angle) = 0.707 (Q30), gain 2 from
		 *   extra sign bits, and eat one in adding
		 */
		t = MULSHIFT32(sin2, ar1 + ai1);
		*fft2-- = t - MULSHIFT32(cps2, ai1);	/* sin*ar1 - cos*ai1 */
		*fft1++ = t + MULSHIFT32(cms2, ar1);	/* cos*ar1 + sin*ai1 */
		cps2 = *csptr++;
		sin2 = *csptr;
		csptr += skipFactor;

		ai2 = -ai2;
		t = MULSHIFT32(sin2, ar2 + ai2);
		*fft2-- = t - MULSHIFT32(cps2, ai2);	/* sin*ar1 - cos*ai1 */
		cms2 = cps2 - 2*sin2;
		*fft1++ = t + MULSHIFT32(cms2, ar2);	/* cos*ar1 + sin*ai1 */
	}
}

/**************************************************************************************
 * Function:    PreMultiplyRescale
 *
 * Description: pre-twiddle stage of DCT4, with rescaling for extra guard bits
 *
 * Inputs:      table index (for transform size)
 *              buffer of nmdct samples
 *              number of guard bits to add to input before processing
 *
 * Outputs:     processed samples in same buffer
 *
 * Return:      none
 *
 * Notes:       see notes on PreMultiply(), above
 **************************************************************************************/
static void PreMultiplyRescale(int tabidx, int *zbuf1, int es)
{
	int i, nmdct, ar1, ai1, ar2, ai2, z1, z2;
	int t, cms2, cps2a, sin2a, cps2b, sin2b;
	int *zbuf2;
	const int *csptr;

	nmdct = nmdctTab[tabidx];
	zbuf2 = zbuf1 + nmdct - 1;
	csptr = cos4sin4tab + cos4sin4tabOffset[tabidx];

	/* whole thing should fit in registers - verify that compiler does this */
	for (i = nmdct >> 2; i != 0; i--) {
		/* cps2 = (cos+sin), sin2 = sin, cms2 = (cos-sin) */
		cps2a = *csptr++;
		sin2a = *csptr++;
		cps2b = *csptr++;
		sin2b = *csptr++;

		ar1 = *(zbuf1 + 0) >> es;
		ai1 = *(zbuf2 + 0) >> es;
		ai2 = *(zbuf1 + 1) >> es;

		t  = MULSHIFT32(sin2a, ar1 + ai1);
		z2 = MULSHIFT32(cps2a, ai1) - t;
		cms2 = cps2a - 2*sin2a;
		z1 = MULSHIFT32(cms2, ar1) + t;
		*zbuf1++ = z1;
		*zbuf1++ = z2;

		ar2 = *(zbuf2 - 1) >> es;	/* do here to free up register used for es */

		t  = MULSHIFT32(sin2b, ar2 + ai2);
		z2 = MULSHIFT32(cps2b, ai2) - t;
		cms2 = cps2b - 2*sin2b;
		z1 = MULSHIFT32(cms2, ar2) + t;
		*zbuf2-- = z2;
		*zbuf2-- = z1;

	}
}

/**************************************************************************************
 * Function:    PostMultiplyRescale
 *
 * Description: post-twiddle stage of DCT4, with rescaling for extra guard bits
 *
 * Inputs:      table index (for transform size)
 *              buffer of nmdct samples
 *              number of guard bits to remove from output
 *
 * Outputs:     processed samples in same buffer
 *
 * Return:      none
 *
 * Notes:       clips output to [-2^30, 2^30 - 1], guaranteeing at least 1 guard bit
 *              see notes on PostMultiply(), above
 **************************************************************************************/
static void PostMultiplyRescale(int tabidx, int *fft1, int es)
{
	int i, nmdct, ar1, ai1, ar2, ai2, skipFactor, z;
	int t, cs2, sin2;
	int *fft2;
	const int *csptr;

	nmdct = nmdctTab[tabidx];
	csptr = cos1sin1tab;
	skipFactor = postSkip[tabidx];
	fft2 = fft1 + nmdct - 1;

	/* load coeffs for first pass
	 * cps2 = (cos+sin), sin2 = sin, cms2 = (cos-sin)
	 */
	cs2 = *csptr++;
	sin2 = *csptr;
	csptr += skipFactor;

	for (i = nmdct >> 2; i != 0; i--) {
		ar1 = *(fft1 + 0);
		ai1 = *(fft1 + 1);
		ai2 = *(fft2 + 0);

		t = MULSHIFT32(sin2, ar1 + ai1);
		z = t - MULSHIFT32(cs2, ai1);
		CLIP_2N_SHIFT(z, es);
		*fft2-- = z;
		cs2 -= 2*sin2;
		z = t + MULSHIFT32(cs2, ar1);
		CLIP_2N_SHIFT(z, es);
		*fft1++ = z;

		cs2 = *csptr++;
		sin2 = *csptr;
		csptr += skipFactor;

		ar2 = *fft2;
		ai2 = -ai2;
		t = MULSHIFT32(sin2, ar2 + ai2);
		z = t - MULSHIFT32(cs2, ai2);
		CLIP_2N_SHIFT(z, es);
		*fft2-- = z;
		cs2 -= 2*sin2;
		z = t + MULSHIFT32(cs2, ar2);
		CLIP_2N_SHIFT(z, es);
		*fft1++ = z;
		cs2 += 2*sin2;
	}
}

/**************************************************************************************
 * Function:    DCT4
 *
 * Description: type-IV DCT
 *
 * Inputs:      table index (for transform size)
 *              buffer of nmdct samples
 *              number of guard bits in the input buffer
 *
 * Outputs:     processed samples in same buffer
 *
 * Return:      none
 *
 * Notes:       operates in-place
 *              if number of guard bits in input is < GBITS_IN_DCT4, the input is
 *                scaled (>>) before the DCT4 and rescaled (<<, with clipping) after
 *                the DCT4 (rare)
 *              the output has FBITS_LOST_DCT4 fewer fraction bits than the input
 *              the output will always have at least 1 guard bit (GBITS_IN_DCT4 >= 4)
 *              int bits gained per stage (PreMul + FFT + PostMul)
 *                 short blocks = (-5 + 4 + 2) = 1 total
 *                 long blocks =  (-8 + 7 + 2) = 1 total
 **************************************************************************************/
void DCT4(int tabidx, int *coef, int gb)
{
	int es;

	/* fast in-place DCT-IV - adds guard bits if necessary */
	if (gb < GBITS_IN_DCT4) {
		es = GBITS_IN_DCT4 - gb;
		PreMultiplyRescale(tabidx, coef, es);
		R4FFT(tabidx, coef);
		PostMultiplyRescale(tabidx, coef, es);
	} else {
		PreMultiply(tabidx, coef);
		R4FFT(tabidx, coef);
		PostMultiply(tabidx, coef);
	}
}